čt 12. 9. 2019 v 12:45 odesílatel Michal Simek michal.simek@xilinx.com napsal:

From: Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com

This patch assings the phynode pointer to the phydev node as it is needed later in the corresponding phy driver to read phy properties from DT.

Signed-off-by: Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com

---

This feature is present in these drivers: drivers/net/ti/am65-cpsw-nuss.c:573: phydev->node = priv->phy_node; drivers/net/ti/cpsw.c:853: phydev->node = offset_to_ofnode(slave->data->phy_of_handle); drivers/net/ti/keystone_net.c:594: priv->phydev->node = offset_to_ofnode(priv->phy_of_handle); drivers/net/zynq_gem.c:322: priv->phydev->node = priv->phy_of_node;

---

drivers/net/xilinx_axi_emac.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c index 26c21c6d70fa..36d651109cbc 100644 --- a/drivers/net/xilinx_axi_emac.c +++ b/drivers/net/xilinx_axi_emac.c @@ -93,6 +93,7 @@ struct axidma_priv { struct phy_device *phydev; struct mii_dev *bus; u8 eth_hasnobuf;

•   int phy_of_handle;
  

};

/* BD descriptors */ @@ -276,6 +277,8 @@ static int axiemac_phy_init(struct udevice *dev) phydev->supported &= supported; phydev->advertising = phydev->supported; priv->phydev = phydev;

•   if (priv->phy_of_handle)
  

•           priv->phydev->node = offset_to_ofnode(priv->phy_of_handle);
    phy_config(phydev);
  
    return 0;
  

@@ -736,8 +739,10 @@ static int axi_emac_ofdata_to_platdata(struct udevice *dev) priv->phyaddr = -1;

    offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "phy-handle");

•   if (offset > 0)
  

•   if (offset > 0) {
            priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1);
  

•           priv->phy_of_handle = offset;
  

•   }
  
    phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL);
    if (phy_mode)
  

-- 2.17.1

Applied. Patchwork assigned this to me. M