Re: [U-Boot] [PATCH 1/2] riscv: qemu: Enable PCI host ECAM generic driver
Hi BIn
Hi Rick,
On Mon, May 27, 2019 at 4:40 PM Auer, Lukas lukas.auer@aisec.fraunhofer.de wrote:
On Wed, 2019-05-15 at 08:42 -0700, Bin Meng wrote:
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)
Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de Tested-by: Lukas Auer lukas.auer@aisec.fraunhofer.de
Could you please apply this series for v2019.07?
OK I will apply it today.
Thanks Rick
Regards, Bin
Hi BIn
Hi Rick,
On Mon, May 27, 2019 at 4:40 PM Auer, Lukas lukas.auer@aisec.fraunhofer.de wrote:
On Wed, 2019-05-15 at 08:42 -0700, Bin Meng wrote:
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)
Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de Tested-by: Lukas Auer lukas.auer@aisec.fraunhofer.de
Could you please apply this series for v2019.07?
Applied to u-boot-riscv/master, thanks!
OK I will apply it today.
Thanks Rick
Regards, Bin
Hi Rick,
On Tue, Jun 4, 2019 at 1:35 PM Rick Chen rickchen36@gmail.com wrote:
Hi BIn
Hi Rick,
On Mon, May 27, 2019 at 4:40 PM Auer, Lukas lukas.auer@aisec.fraunhofer.de wrote:
On Wed, 2019-05-15 at 08:42 -0700, Bin Meng wrote:
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)
Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de Tested-by: Lukas Auer lukas.auer@aisec.fraunhofer.de
Could you please apply this series for v2019.07?
Applied to u-boot-riscv/master, thanks!
Thanks for applying.
By searching riscv patches from patchwork, it seems there are some old patches that are not cleaned up. I am not sure about their status. Maybe they are already applied.
http://patchwork.ozlabs.org/project/uboot/list/?series=&submitter=&s...
Could you please do some house keeping?
Regards, Bin
Hi Bin
Bin Meng bmeng.cn@gmail.com 於 2019年6月4日 週二 下午2:27寫道：
Hi Rick,
On Tue, Jun 4, 2019 at 1:35 PM Rick Chen rickchen36@gmail.com wrote:
Hi BIn
Hi Rick,
On Mon, May 27, 2019 at 4:40 PM Auer, Lukas lukas.auer@aisec.fraunhofer.de wrote:
On Wed, 2019-05-15 at 08:42 -0700, Bin Meng wrote:
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)
Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de Tested-by: Lukas Auer lukas.auer@aisec.fraunhofer.de
Could you please apply this series for v2019.07?
Applied to u-boot-riscv/master, thanks!
Thanks for applying.
By searching riscv patches from patchwork, it seems there are some old patches that are not cleaned up. I am not sure about their status. Maybe they are already applied.
I will rebase to u-boot/master before applying the patchs. If they are already applied, there will have conflictions, right ?
http://patchwork.ozlabs.org/project/uboot/list/?series=&submitter=&s...
Could you please do some house keeping?
I am not sure what do you mean about house keeping ?
Regards, Bin
Hi Rick,
On Wed, Jun 5, 2019 at 1:55 PM Rick Chen rickchen36@gmail.com wrote:
Hi Bin
Bin Meng bmeng.cn@gmail.com 於 2019年6月4日 週二 下午2:27寫道：
Hi Rick,
On Tue, Jun 4, 2019 at 1:35 PM Rick Chen rickchen36@gmail.com wrote:
Hi BIn
Hi Rick,
On Mon, May 27, 2019 at 4:40 PM Auer, Lukas lukas.auer@aisec.fraunhofer.de wrote:
On Wed, 2019-05-15 at 08:42 -0700, Bin Meng wrote: > QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. > Enable the driver for it. > > Signed-off-by: Bin Meng bmeng.cn@gmail.com > --- > > board/emulation/qemu-riscv/Kconfig | 4 ++++ > 1 file changed, 4 insertions(+) >
Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de Tested-by: Lukas Auer lukas.auer@aisec.fraunhofer.de
Could you please apply this series for v2019.07?
Applied to u-boot-riscv/master, thanks!
Thanks for applying.
By searching riscv patches from patchwork, it seems there are some old patches that are not cleaned up. I am not sure about their status. Maybe they are already applied.
I will rebase to u-boot/master before applying the patchs. If they are already applied, there will have conflictions, right ?
Not sure if there will be conflicts, so simply not applied (skipped). You can try.
http://patchwork.ozlabs.org/project/uboot/list/?series=&submitter=&s...
Could you please do some house keeping?
I am not sure what do you mean about house keeping ?
I meant that you should clean up all these patches in your queue. Either mark them as accepted, or superseded, etc.
Regards, Bin
Hi Bin
Bin Meng bmeng.cn@gmail.com 於 2019年6月5日 週三 下午5:29寫道：
Hi Rick,
On Wed, Jun 5, 2019 at 1:55 PM Rick Chen rickchen36@gmail.com wrote:
Hi Bin
Bin Meng bmeng.cn@gmail.com 於 2019年6月4日 週二 下午2:27寫道：
Hi Rick,
On Tue, Jun 4, 2019 at 1:35 PM Rick Chen rickchen36@gmail.com wrote:
Hi BIn
Hi Rick,
On Mon, May 27, 2019 at 4:40 PM Auer, Lukas lukas.auer@aisec.fraunhofer.de wrote: > > On Wed, 2019-05-15 at 08:42 -0700, Bin Meng wrote: > > QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. > > Enable the driver for it. > > > > Signed-off-by: Bin Meng bmeng.cn@gmail.com > > --- > > > > board/emulation/qemu-riscv/Kconfig | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de > Tested-by: Lukas Auer lukas.auer@aisec.fraunhofer.de
Could you please apply this series for v2019.07?
Applied to u-boot-riscv/master, thanks!
Thanks for applying.
By searching riscv patches from patchwork, it seems there are some old patches that are not cleaned up. I am not sure about their status. Maybe they are already applied.
I will rebase to u-boot/master before applying the patchs. If they are already applied, there will have conflictions, right ?
Not sure if there will be conflicts, so simply not applied (skipped). You can try.
http://patchwork.ozlabs.org/project/uboot/list/?series=&submitter=&s...
Could you please do some house keeping?
I am not sure what do you mean about house keeping ?
I meant that you should clean up all these patches in your queue. Either mark them as accepted, or superseded, etc.
I just applied your patchs yesterday. And its state became Accepted. https://patchwork.ozlabs.org/project/uboot/list/?order=delegate&state=*
I thought it will change by my actions automatically. How can I change state from New to Accepted ?
Thanks Rick
Regards, Bin
Hi Rick,
On Wed, Jun 5, 2019 at 6:04 PM Rick Chen rickchen36@gmail.com wrote:
Hi Bin
Bin Meng bmeng.cn@gmail.com 於 2019年6月5日 週三 下午5:29寫道：
Hi Rick,
On Wed, Jun 5, 2019 at 1:55 PM Rick Chen rickchen36@gmail.com wrote:
Hi Bin
Bin Meng bmeng.cn@gmail.com 於 2019年6月4日 週二 下午2:27寫道：
Hi Rick,
On Tue, Jun 4, 2019 at 1:35 PM Rick Chen rickchen36@gmail.com wrote:
Hi BIn
> Hi Rick, > > On Mon, May 27, 2019 at 4:40 PM Auer, Lukas > lukas.auer@aisec.fraunhofer.de wrote: > > > > On Wed, 2019-05-15 at 08:42 -0700, Bin Meng wrote: > > > QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. > > > Enable the driver for it. > > > > > > Signed-off-by: Bin Meng bmeng.cn@gmail.com > > > --- > > > > > > board/emulation/qemu-riscv/Kconfig | 4 ++++ > > > 1 file changed, 4 insertions(+) > > > > > > > Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de > > Tested-by: Lukas Auer lukas.auer@aisec.fraunhofer.de > > Could you please apply this series for v2019.07? >
Applied to u-boot-riscv/master, thanks!
Thanks for applying.
By searching riscv patches from patchwork, it seems there are some old patches that are not cleaned up. I am not sure about their status. Maybe they are already applied.
I will rebase to u-boot/master before applying the patchs. If they are already applied, there will have conflictions, right ?
Not sure if there will be conflicts, so simply not applied (skipped). You can try.
http://patchwork.ozlabs.org/project/uboot/list/?series=&submitter=&s...
Could you please do some house keeping?
I am not sure what do you mean about house keeping ?
I meant that you should clean up all these patches in your queue. Either mark them as accepted, or superseded, etc.
I just applied your patchs yesterday. And its state became Accepted.
I cleaned up my patches because I have the privilege to change patch status.
https://patchwork.ozlabs.org/project/uboot/list/?order=delegate&state=*
I thought it will change by my actions automatically.
No, it won't.
How can I change state from New to Accepted ?
You need change the state manually. I don't know other patches' status, so I left them to you. In the end, you are the RISC-V custodian.
Regards, Bin
participants (2)
-
Bin Meng -
Rick Chen