Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section in ldscripts" vs v2014.01.

This has been stripped back for mainlining and supports only sun7i. These changes are not useful by themselves but are split out to make the patch sizes more manageable.

As well as the following signed-off-by the sunxi branch shows commits to these files authored by the following: Alejandro Mery Carl van Schaik Stefan Roese Tom Cubie yemao

Signed-off-by: Alexandru Gagniuc mr.nuke.me@gmail.com Signed-off-by: Chen-Yu Tsai wens@csie.org Signed-off-by: Emilio López emilio@elopez.com.ar Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Henrik Nordstrom henrik@henriknordstrom.net Signed-off-by: Jens Kuske jenskuske@gmail.com Signed-off-by: Luke Leighton lkcl@lkcl.net Signed-off-by: Oliver Schinagl oliver@schinagl.nl Signed-off-by: Ian Campbell ijc@hellion.org.uk

--- Contributors: git log --pretty='%aN' linux-sunxi/sunxi -- [PATHS] | sort -u --- arch/arm/cpu/armv7/sunxi/Makefile | 28 ++++ arch/arm/cpu/armv7/sunxi/clock.c | 177 +++++++++++++++++++++ arch/arm/cpu/armv7/sunxi/timer.c | 120 ++++++++++++++ arch/arm/include/asm/arch-sunxi/clock.h | 238 ++++++++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/sys_proto.h | 33 ++++ arch/arm/include/asm/arch-sunxi/timer.h | 104 ++++++++++++ 6 files changed, 700 insertions(+) create mode 100644 arch/arm/cpu/armv7/sunxi/Makefile create mode 100644 arch/arm/cpu/armv7/sunxi/clock.c create mode 100644 arch/arm/cpu/armv7/sunxi/timer.c create mode 100644 arch/arm/include/asm/arch-sunxi/clock.h create mode 100644 arch/arm/include/asm/arch-sunxi/sys_proto.h create mode 100644 arch/arm/include/asm/arch-sunxi/timer.h

diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile new file mode 100644 index 0000000..b56c32b --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -0,0 +1,28 @@ +# +# (C) Copyright 2012 Henrik Nordstrom henrik@henriknordstrom.net +# +# Based on some other Makefile +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +obj-y += timer.o +obj-y += clock.o diff --git a/arch/arm/cpu/armv7/sunxi/clock.c b/arch/arm/cpu/armv7/sunxi/clock.c new file mode 100644 index 0000000..e3abaf0 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/clock.c @@ -0,0 +1,177 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * (C) Copyright 2013 Luke Kenneth Casson Leighton lkcl@lkcl.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> + +#ifdef CONFIG_SPL_BUILD +static void clock_init_safe(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* Set safe defaults until PMU is configured */ + writel(AXI_DIV_1 << 0 | AHB_DIV_2 << 4 | APB0_DIV_1 << 8 | + CPU_CLK_SRC_OSC24M << 16, &ccm->cpu_ahb_apb0_cfg); + writel(0xa1005000, &ccm->pll1_cfg); + sdelay(200); + writel(AXI_DIV_1 << 0 | AHB_DIV_2 << 4 | APB0_DIV_1 << 8 | + CPU_CLK_SRC_PLL1 << 16, &ccm->cpu_ahb_apb0_cfg); + writel(0x1 << 6 | readl(&ccm->ahb_gate0), &ccm->ahb_gate0); + writel(0x1 << 31 | readl(&ccm->pll6_cfg), &ccm->pll6_cfg); +} +#endif + +int clock_init(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + +#ifdef CONFIG_SPL_BUILD + clock_init_safe(); +#endif + + /* uart clock source is apb1 */ + sr32(&ccm->apb1_clk_div_cfg, 24, 2, APB1_CLK_SRC_OSC24M); + sr32(&ccm->apb1_clk_div_cfg, 16, 2, APB1_FACTOR_N); + sr32(&ccm->apb1_clk_div_cfg, 0, 5, APB1_FACTOR_M); + + /* open the clock for uart */ + sr32(&ccm->apb1_gate, 16 + CONFIG_CONS_INDEX - 1, 1, CLK_GATE_OPEN); + + return 0; +} + +/* Return PLL5 frequency in Hz + * Note: Assumes PLL5 reference is 24MHz clock + */ +unsigned int clock_get_pll5(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + uint32_t rval = readl(&ccm->pll5_cfg); + int n = (rval >> 8) & 0x1f; + int k = ((rval >> 4) & 3) + 1; + int p = 1 << ((rval >> 16) & 3); + return 24000000 * n * k / p; +} + +int clock_twi_onoff(int port, int state) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + if (port > 2) + return -1; + + /* set the apb1 clock gate for twi */ + sr32(&ccm->apb1_gate, 0 + port, 1, state); + + return 0; +} + +#ifdef CONFIG_SPL_BUILD +#define PLL1_CFG(N, K, M, P) (1 << 31 | 0 << 30 | 8 << 26 | 0 << 25 | \ + 16 << 20 | (P) << 16 | 2 << 13 | (N) << 8 | \ + (K) << 4 | 0 << 3 | 0 << 2 | (M) << 0) +#define RDIV(a, b) ((a + (b) - 1) / (b)) + +struct { + u32 pll1_cfg; + unsigned int freq; +} pll1_para[] = { + { PLL1_CFG(16, 0, 0, 0), 384000000 }, + { PLL1_CFG(16, 1, 0, 0), 768000000 }, + { PLL1_CFG(20, 1, 0, 0), 960000000 }, + { PLL1_CFG(21, 1, 0, 0), 1008000000}, + { PLL1_CFG(22, 1, 0, 0), 1056000000}, + { PLL1_CFG(23, 1, 0, 0), 1104000000}, + { PLL1_CFG(24, 1, 0, 0), 1152000000}, + { PLL1_CFG(25, 1, 0, 0), 1200000000}, + { PLL1_CFG(26, 1, 0, 0), 1248000000}, + { PLL1_CFG(27, 1, 0, 0), 1296000000}, + { PLL1_CFG(28, 1, 0, 0), 1344000000}, + { PLL1_CFG(29, 1, 0, 0), 1392000000}, + { PLL1_CFG(30, 1, 0, 0), 1440000000}, + { PLL1_CFG(31, 1, 0, 0), 1488000000}, + { PLL1_CFG(31, 1, 0, 0), ~0}, +}; + +void clock_set_pll1(int hz) +{ + int i = 0; + int axi, ahb, apb0; + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* Find target frequency */ + while (pll1_para[i].freq < hz) + i++; + + hz = pll1_para[i].freq; + + /* Calculate system clock divisors */ + axi = RDIV(hz, 432000000); /* Max 450MHz */ + ahb = RDIV(hz/axi, 204000000); /* Max 250MHz */ + apb0 = 2; /* Max 150MHz */ + + printf("CPU: %dHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0); + + /* Map divisors to register values */ + axi = axi - 1; + if (ahb > 4) + ahb = 3; + else if (ahb > 2) + ahb = 2; + else if (ahb > 1) + ahb = 1; + else + ahb = 0; + + apb0 = apb0 - 1; + + /* Switch to 24MHz clock while changing PLL1 */ + writel(AXI_DIV_1 << 0 | AHB_DIV_2 << 4 | APB0_DIV_1 << 8 | + CPU_CLK_SRC_OSC24M << 16, &ccm->cpu_ahb_apb0_cfg); + sdelay(20); + + /* Configure sys clock divisors */ + writel(axi << 0 | ahb << 4 | apb0 << 8 | CPU_CLK_SRC_OSC24M << 16, + &ccm->cpu_ahb_apb0_cfg); + + /* Configure PLL1 at the desired frequency */ + writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg); + sdelay(200); + + /* Switch CPU to PLL1 */ + writel(axi << 0 | ahb << 4 | apb0 << 8 | CPU_CLK_SRC_PLL1 << 16, + &ccm->cpu_ahb_apb0_cfg); + sdelay(20); +} +#endif diff --git a/arch/arm/cpu/armv7/sunxi/timer.c b/arch/arm/cpu/armv7/sunxi/timer.c new file mode 100644 index 0000000..c69ed73 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/timer.c @@ -0,0 +1,120 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/timer.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define TIMER_MODE (0x0 << 7) /* continuous mode */ +#define TIMER_DIV (0x0 << 4) /* pre scale 1 */ +#define TIMER_SRC (0x1 << 2) /* osc24m */ +#define TIMER_RELOAD (0x1 << 1) /* reload internal value */ +#define TIMER_EN (0x1 << 0) /* enable timer */ + +#define TIMER_CLOCK (24 * 1000 * 1000) +#define COUNT_TO_USEC(x) ((x) / 24) +#define USEC_TO_COUNT(x) ((x) * 24) +#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) +#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ) + +#define TIMER_LOAD_VAL 0xffffffff + +#define TIMER_NUM 0 /* we use timer 0 */ + +static struct sunxi_timer *timer_base = + &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->timer[TIMER_NUM]; + +/* macro to read the 32 bit timer: since it decrements, we invert read value */ +#define READ_TIMER() (~readl(&timer_base->val)) + +/* init timer register */ +int timer_init(void) +{ + writel(TIMER_LOAD_VAL, &timer_base->inter); + writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN, + &timer_base->ctl); + + return 0; +} + +/* timer without interrupts */ +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +ulong get_timer_masked(void) +{ + /* current tick value */ + ulong now = TICKS_TO_HZ(READ_TIMER()); + + if (now >= gd->arch.lastinc) /* normal (non rollover) */ + gd->arch.tbl += (now - gd->arch.lastinc); + else { + /* rollover */ + gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) + - gd->arch.lastinc) + now; + } + gd->arch.lastinc = now; + + return gd->arch.tbl; +} + +/* delay x useconds */ +void __udelay(unsigned long usec) +{ + long tmo = USEC_TO_COUNT(usec); + ulong now, last = READ_TIMER(); + + while (tmo > 0) { + now = READ_TIMER(); + if (now > last) /* normal (non rollover) */ + tmo -= now - last; + else /* rollover */ + tmo -= TIMER_LOAD_VAL - last + now; + last = now; + } +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + ulong tbclk; + tbclk = CONFIG_SYS_HZ; + return tbclk; +} diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h new file mode 100644 index 0000000..af824dc --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -0,0 +1,238 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SUNXI_CLOCK_H +#define _SUNXI_CLOCK_H + +#include <linux/types.h> + +/* clock control module regs definition */ + +struct sunxi_ccm_reg { + u32 pll1_cfg; /* 0x00 pll1 control */ + u32 pll1_tun; /* 0x04 pll1 tuning */ + u32 pll2_cfg; /* 0x08 pll2 control */ + u32 pll2_tun; /* 0x0c pll2 tuning */ + u32 pll3_cfg; /* 0x10 pll3 control */ + u8 res0[0x4]; + u32 pll4_cfg; /* 0x18 pll4 control */ + u8 res1[0x4]; + u32 pll5_cfg; /* 0x20 pll5 control */ + u32 pll5_tun; /* 0x24 pll5 tuning */ + u32 pll6_cfg; /* 0x28 pll6 control */ + u32 pll6_tun; /* 0x2c pll6 tuning */ + u32 pll7_cfg; /* 0x30 pll7 control */ + u32 pll1_tun2; /* 0x34 pll5 tuning2 */ + u8 res2[0x4]; + u32 pll5_tun2; /* 0x3c pll5 tuning2 */ + u8 res3[0xc]; + u32 pll_lock_dbg; /* 0x4c pll lock time debug */ + u32 osc24m_cfg; /* 0x50 osc24m control */ + u32 cpu_ahb_apb0_cfg; /* 0x54 cpu,ahb and apb0 divide ratio */ + u32 apb1_clk_div_cfg; /* 0x58 apb1 clock dividor */ + u32 axi_gate; /* 0x5c axi module clock gating */ + u32 ahb_gate0; /* 0x60 ahb module clock gating 0 */ + u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */ + u32 apb0_gate; /* 0x68 apb0 module clock gating */ + u32 apb1_gate; /* 0x6c apb1 module clock gating */ + u8 res4[0x10]; + u32 nand_sclk_cfg; /* 0x80 nand sub clock control */ + u32 ms_sclk_cfg; /* 0x84 memory stick sub clock control */ + u32 sd0_clk_cfg; /* 0x88 sd0 clock control */ + u32 sd1_clk_cfg; /* 0x8c sd1 clock control */ + u32 sd2_clk_cfg; /* 0x90 sd2 clock control */ + u32 sd3_clk_cfg; /* 0x94 sd3 clock control */ + u32 ts_clk_cfg; /* 0x98 transport stream clock control */ + u32 ss_clk_cfg; /* 0x9c */ + u32 spi0_clk_cfg; /* 0xa0 */ + u32 spi1_clk_cfg; /* 0xa4 */ + u32 spi2_clk_cfg; /* 0xa8 */ + u32 pata_clk_cfg; /* 0xac */ + u32 ir0_clk_cfg; /* 0xb0 */ + u32 ir1_clk_cfg; /* 0xb4 */ + u32 iis_clk_cfg; /* 0xb8 */ + u32 ac97_clk_cfg; /* 0xbc */ + u32 spdif_clk_cfg; /* 0xc0 */ + u32 keypad_clk_cfg; /* 0xc4 */ + u32 sata_clk_cfg; /* 0xc8 */ + u32 usb_clk_cfg; /* 0xcc */ + u32 gps_clk_cfg; /* 0xd0 */ + u32 spi3_clk_cfg; /* 0xd4 */ + u8 res5[0x28]; + u32 dram_clk_cfg; /* 0x100 */ + u32 be0_clk_cfg; /* 0x104 */ + u32 be1_clk_cfg; /* 0x108 */ + u32 fe0_clk_cfg; /* 0x10c */ + u32 fe1_clk_cfg; /* 0x110 */ + u32 mp_clk_cfg; /* 0x114 */ + u32 lcd0_ch0_clk_cfg; /* 0x118 */ + u32 lcd1_ch0_clk_cfg; /* 0x11c */ + u32 csi_isp_clk_cfg; /* 0x120 */ + u8 res6[0x4]; + u32 tvd_clk_reg; /* 0x128 */ + u32 lcd0_ch1_clk_cfg; /* 0x12c */ + u32 lcd1_ch1_clk_cfg; /* 0x130 */ + u32 csi0_clk_cfg; /* 0x134 */ + u32 csi1_clk_cfg; /* 0x138 */ + u32 ve_clk_cfg; /* 0x13c */ + u32 audio_codec_clk_cfg; /* 0x140 */ + u32 avs_clk_cfg; /* 0x144 */ + u32 ace_clk_cfg; /* 0x148 */ + u32 lvds_clk_cfg; /* 0x14c */ + u32 hdmi_clk_cfg; /* 0x150 */ + u32 mali_clk_cfg; /* 0x154 */ + u8 res7[0x4]; + u32 mbus_clk_cfg; /* 0x15c */ + u8 res8[0x4]; + u32 gmac_clk_cfg; /* 0x164 */ +}; + +/* apb1 bit field */ +#define APB1_CLK_SRC_OSC24M 0 +#define APB1_FACTOR_M 0 +#define APB1_FACTOR_N 0 + +/* clock divide */ +#define CPU_CLK_SRC_OSC24M 1 +#define CPU_CLK_SRC_PLL1 2 +#define AXI_DIV_1 0 +#define AXI_DIV_2 1 +#define AXI_DIV_3 2 +#define AXI_DIV_4 3 +#define AHB_DIV_1 0 +#define AHB_DIV_2 1 +#define AHB_DIV_4 2 +#define AHB_DIV_8 3 +#define APB0_DIV_1 0 +#define APB0_DIV_2 1 +#define APB0_DIV_4 2 +#define APB0_DIV_8 3 + +#define CLK_GATE_OPEN 0x1 +#define CLK_GATE_CLOSE 0x0 + +/* nand clock */ +#define NAND_CLK_SRC_OSC24 0 +#define NAND_CLK_DIV_N 0 +#define NAND_CLK_DIV_M 0 + +/* gps clock */ +#define GPS_SCLK_GATING_OFF 0 +#define GPS_RESET 0 + +/* ahb clock gate bit offset */ +#define AHB_GATE_OFFSET_GPS 26 +#define AHB_GATE_OFFSET_SATA 25 +#define AHB_GATE_OFFSET_PATA 24 +#define AHB_GATE_OFFSET_SPI3 23 +#define AHB_GATE_OFFSET_SPI2 22 +#define AHB_GATE_OFFSET_SPI1 21 +#define AHB_GATE_OFFSET_SPI0 20 +#define AHB_GATE_OFFSET_TS0 18 +#define AHB_GATE_OFFSET_EMAC 17 +#define AHB_GATE_OFFSET_ACE 16 +#define AHB_GATE_OFFSET_DLL 15 +#define AHB_GATE_OFFSET_SDRAM 14 +#define AHB_GATE_OFFSET_NAND 13 +#define AHB_GATE_OFFSET_MS 12 +#define AHB_GATE_OFFSET_MMC3 11 +#define AHB_GATE_OFFSET_MMC2 10 +#define AHB_GATE_OFFSET_MMC1 9 +#define AHB_GATE_OFFSET_MMC0 8 +#define AHB_GATE_OFFSET_BIST 7 +#define AHB_GATE_OFFSET_DMA 6 +#define AHB_GATE_OFFSET_SS 5 +#define AHB_GATE_OFFSET_USB_OHCI1 4 +#define AHB_GATE_OFFSET_USB_EHCI1 3 +#define AHB_GATE_OFFSET_USB_OHCI0 2 +#define AHB_GATE_OFFSET_USB_EHCI0 1 +#define AHB_GATE_OFFSET_USB 0 + +/* ahb clock gate bit offset (second register) */ +#define AHB_GATE_OFFSET_GMAC 17 + +#define CCM_AHB_GATE_GPS (0x1 << 26) +#define CCM_AHB_GATE_SDRAM (0x1 << 14) +#define CCM_AHB_GATE_DLL (0x1 << 15) +#define CCM_AHB_GATE_ACE (0x1 << 16) + +#define CCM_PLL5_CTRL_M(n) (((n) & 0x3) << 0) +#define CCM_PLL5_CTRL_M_MASK CCM_PLL5_CTRL_M(0x3) +#define CCM_PLL5_CTRL_M_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_M1(n) (((n) & 0x3) << 2) +#define CCM_PLL5_CTRL_M1_MASK CCM_PLL5_CTRL_M1(0x3) +#define CCM_PLL5_CTRL_M1_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_K(n) (((n) & 0x3) << 4) +#define CCM_PLL5_CTRL_K_MASK CCM_PLL5_CTRL_K(0x3) +#define CCM_PLL5_CTRL_K_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_LDO (0x1 << 7) +#define CCM_PLL5_CTRL_N(n) (((n) & 0x1f) << 8) +#define CCM_PLL5_CTRL_N_MASK CCM_PLL5_CTRL_N(0x1f) +#define CCM_PLL5_CTRL_N_X(n) (n) +#define CCM_PLL5_CTRL_P(n) (((n) & 0x3) << 16) +#define CCM_PLL5_CTRL_P_MASK CCM_PLL5_CTRL_P(0x3) +#define CCM_PLL5_CTRL_P_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_BW (0x1 << 18) +#define CCM_PLL5_CTRL_VCO_GAIN (0x1 << 19) +#define CCM_PLL5_CTRL_BIAS(n) (((n) & 0x1f) << 20) +#define CCM_PLL5_CTRL_BIAS_MASK CCM_PLL5_CTRL_BIAS(0x1f) +#define CCM_PLL5_CTRL_BIAS_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_VCO_BIAS (0x1 << 25) +#define CCM_PLL5_CTRL_DDR_CLK (0x1 << 29) +#define CCM_PLL5_CTRL_BYPASS (0x1 << 30) +#define CCM_PLL5_CTRL_EN (0x1 << 31) + +#define CCM_GPS_CTRL_RESET (0x1 << 0) +#define CCM_GPS_CTRL_GATE (0x1 << 1) + +#define CCM_DRAM_CTRL_DCLK_OUT (0x1 << 15) + +#define CCM_MBUS_CTRL_M(n) (((n) & 0xf) << 0) +#define CCM_MBUS_CTRL_M_MASK CCM_MBUS_CTRL_M(0xf) +#define CCM_MBUS_CTRL_M_X(n) ((n) - 1) +#define CCM_MBUS_CTRL_N(n) (((n) & 0xf) << 16) +#define CCM_MBUS_CTRL_N_MASK CCM_MBUS_CTRL_N(0xf) +#define CCM_MBUS_CTRL_N_X(n) (((n) >> 3) ? 3 : (((n) >> 2) ? 2 : (((n) >> 1) ? 1 : 0))) +#define CCM_MBUS_CTRL_CLK_SRC(n) (((n) & 0x3) << 24) +#define CCM_MBUS_CTRL_CLK_SRC_MASK CCM_MBUS_CTRL_CLK_SRC(0x3) +#define CCM_MBUS_CTRL_CLK_SRC_HOSC 0x0 +#define CCM_MBUS_CTRL_CLK_SRC_PLL6 0x1 +#define CCM_MBUS_CTRL_CLK_SRC_PLL5 0x2 +#define CCM_MBUS_CTRL_GATE (0x1 << 31) + +#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0 +#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1 +#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 +#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2) +#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2) + + +#ifndef __ASSEMBLY__ +int clock_init(void); +int clock_twi_onoff(int port, int state); +void clock_set_pll1(int mhz); +unsigned int clock_get_pll5(void); +#endif + +#endif /* _SUNXI_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h new file mode 100644 index 0000000..78a2b39 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h @@ -0,0 +1,33 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +#include <linux/types.h> + +void sr32(u32 *, u32, u32, u32); +void sdelay(unsigned long); + +#endif diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h new file mode 100644 index 0000000..f9d4f4f --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/timer.h @@ -0,0 +1,104 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * Configuration settings for the Allwinner A10-evb board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SUNXI_TIMER_H_ +#define _SUNXI_TIMER_H_ + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> + +/* General purpose timer */ +struct sunxi_timer { + u32 ctl; + u32 inter; + u32 val; + u8 res[4]; +}; + +/* Audio video sync*/ +struct sunxi_avs { + u32 ctl; /* 0x80 */ + u32 cnt0; /* 0x84 */ + u32 cnt1; /* 0x88 */ + u32 div; /* 0x8c */ +}; + +/* 64 bit counter */ +struct sunxi_64cnt { + u32 ctl; /* 0xa0 */ + u32 lo; /* 0xa4 */ + u32 hi; /* 0xa8 */ +}; + +/* Watchdog */ +struct sunxi_wdog { + u32 ctl; /* 0x90 */ + u32 mode; /* 0x94 */ +}; + +/* Rtc */ +struct sunxi_rtc { + u32 ctl; /* 0x100 */ + u32 yymmdd; /* 0x104 */ + u32 hhmmss; /* 0x108 */ +}; + +/* Alarm */ +struct sunxi_alarm { + u32 ddhhmmss; /* 0x10c */ + u32 hhmmss; /* 0x110 */ + u32 en; /* 0x114 */ + u32 irqen; /* 0x118 */ + u32 irqsta; /* 0x11c */ +}; + +/* Timer general purpose register */ +struct sunxi_tgp { + u32 tgpd; +}; + +struct sunxi_timer_reg { + u32 tirqen; /* 0x00 */ + u32 tirqsta; /* 0x04 */ + u8 res1[8]; + struct sunxi_timer timer[6]; /* We have 6 timers */ + u8 res2[16]; + struct sunxi_avs avs; + struct sunxi_wdog wdog; + u8 res3[8]; + struct sunxi_64cnt cnt64; + u8 res4[0x58]; + struct sunxi_rtc rtc; + struct sunxi_alarm alarm; + struct sunxi_tgp tgp[4]; + u8 res5[8]; + u32 cpu_cfg; +}; + +#endif /* __ASSEMBLY__ */ + +#endif

Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section in ldscripts" vs v2014.01.

This has been stripped back for mainlining and supports only sun7i. These changes are not useful by themselves but are split out to make the patch sizes more manageable.

As well as the following signed-off-by the sunxi branch shows commits to these files authored by the following: Carl van Schaik Henrik Nordstrom Stefan Roese Tom Cubie

Signed-off-by: Chen-Yu Tsai wens@csie.org Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Ma Haijun mahaijuns@gmail.com Signed-off-by: Oliver Schinagl oliver@schinagl.nl Signed-off-by: Ian Campbell ijc@hellion.org.uk --- arch/arm/cpu/armv7/sunxi/Makefile | 1 + arch/arm/cpu/armv7/sunxi/pinmux.c | 96 ++++++++++++++++++ arch/arm/include/asm/arch-sunxi/gpio.h | 179 +++++++++++++++++++++++++++++++++ 3 files changed, 276 insertions(+) create mode 100644 arch/arm/cpu/armv7/sunxi/pinmux.c create mode 100644 arch/arm/include/asm/arch-sunxi/gpio.h

diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index b56c32b..b4298c0 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -26,3 +26,4 @@

obj-y += timer.o obj-y += clock.o +obj-y += pinmux.o diff --git a/arch/arm/cpu/armv7/sunxi/pinmux.c b/arch/arm/cpu/armv7/sunxi/pinmux.c new file mode 100644 index 0000000..56671f6 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/pinmux.c @@ -0,0 +1,96 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/gpio.h> + +int sunxi_gpio_set_cfgpin(u32 pin, u32 val) +{ + u32 cfg; + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_CFG_INDEX(pin); + u32 offset = GPIO_CFG_OFFSET(pin); + struct sunxi_gpio *pio = + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank]; + + cfg = readl(&pio->cfg[0] + index); + cfg &= ~(0xf << offset); + cfg |= val << offset; + + writel(cfg, &pio->cfg[0] + index); + + return 0; +} + +int sunxi_gpio_get_cfgpin(u32 pin) +{ + u32 cfg; + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_CFG_INDEX(pin); + u32 offset = GPIO_CFG_OFFSET(pin); + struct sunxi_gpio *pio = + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank]; + + cfg = readl(&pio->cfg[0] + index); + cfg >>= offset; + + return cfg & 0xf; +} + +int sunxi_gpio_set_drv(u32 pin, u32 val) +{ + u32 drv; + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_DRV_INDEX(pin); + u32 offset = GPIO_DRV_OFFSET(pin); + struct sunxi_gpio *pio = + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank]; + + drv = readl(&pio->drv[0] + index); + drv &= ~(0x3 << offset); + drv |= val << offset; + + writel(drv, &pio->drv[0] + index); + + return 0; +} + +int sunxi_gpio_set_pull(u32 pin, u32 val) +{ + u32 pull; + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_PULL_INDEX(pin); + u32 offset = GPIO_PULL_OFFSET(pin); + struct sunxi_gpio *pio = + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank]; + + pull = readl(&pio->pull[0] + index); + pull &= ~(0x3 << offset); + pull |= val << offset; + + writel(pull, &pio->pull[0] + index); + + return 0; +} diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h new file mode 100644 index 0000000..79b4f21 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -0,0 +1,179 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SUNXI_GPIO_H +#define _SUNXI_GPIO_H + +#include <linux/types.h> + +/* + * sunxi has 9 banks of gpio, they are: + * PA0 - PA17 | PB0 - PB23 | PC0 - PC24 + * PD0 - PD27 | PE0 - PE31 | PF0 - PF5 + * PG0 - PG9 | PH0 - PH27 | PI0 - PI12 + */ + +#define SUNXI_GPIO_A 0 +#define SUNXI_GPIO_B 1 +#define SUNXI_GPIO_C 2 +#define SUNXI_GPIO_D 3 +#define SUNXI_GPIO_E 4 +#define SUNXI_GPIO_F 5 +#define SUNXI_GPIO_G 6 +#define SUNXI_GPIO_H 7 +#define SUNXI_GPIO_I 8 + +struct sunxi_gpio { + u32 cfg[4]; + u32 dat; + u32 drv[2]; + u32 pull[2]; +}; + +/* gpio interrupt control */ +struct sunxi_gpio_int { + u32 cfg[3]; + u32 ctl; + u32 sta; + u32 deb; /* interrupt debounce */ +}; + +struct sunxi_gpio_reg { + struct sunxi_gpio gpio_bank[9]; + u8 res[0xbc]; + struct sunxi_gpio_int gpio_int; +}; + +#define GPIO_BANK(pin) ((pin) >> 5) +#define GPIO_NUM(pin) ((pin) & 0x1f) + +#define GPIO_CFG_INDEX(pin) (((pin) & 0x1f) >> 3) +#define GPIO_CFG_OFFSET(pin) ((((pin) & 0x1f) & 0x7) << 2) + +#define GPIO_DRV_INDEX(pin) (((pin) & 0x1f) >> 4) +#define GPIO_DRV_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) + +#define GPIO_PULL_INDEX(pin) (((pin) & 0x1f) >> 4) +#define GPIO_PULL_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) + +/* GPIO bank sizes */ +#define SUNXI_GPIO_A_NR 32 +#define SUNXI_GPIO_B_NR 32 +#define SUNXI_GPIO_C_NR 32 +#define SUNXI_GPIO_D_NR 32 +#define SUNXI_GPIO_E_NR 32 +#define SUNXI_GPIO_F_NR 32 +#define SUNXI_GPIO_G_NR 32 +#define SUNXI_GPIO_H_NR 32 +#define SUNXI_GPIO_I_NR 32 + +#define SUNXI_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + 0) + +enum sunxi_gpio_number { + SUNXI_GPIO_A_START = 0, + SUNXI_GPIO_B_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_A), + SUNXI_GPIO_C_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_B), + SUNXI_GPIO_D_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_C), + SUNXI_GPIO_E_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_D), + SUNXI_GPIO_F_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_E), + SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F), + SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G), + SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H), +}; + +/* SUNXI GPIO number definitions */ +#define SUNXI_GPA(_nr) (SUNXI_GPIO_A_START + (_nr)) +#define SUNXI_GPB(_nr) (SUNXI_GPIO_B_START + (_nr)) +#define SUNXI_GPC(_nr) (SUNXI_GPIO_C_START + (_nr)) +#define SUNXI_GPD(_nr) (SUNXI_GPIO_D_START + (_nr)) +#define SUNXI_GPE(_nr) (SUNXI_GPIO_E_START + (_nr)) +#define SUNXI_GPF(_nr) (SUNXI_GPIO_F_START + (_nr)) +#define SUNXI_GPG(_nr) (SUNXI_GPIO_G_START + (_nr)) +#define SUNXI_GPH(_nr) (SUNXI_GPIO_H_START + (_nr)) +#define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr)) + +/* GPIO pin function config */ +#define SUNXI_GPIO_INPUT 0 +#define SUNXI_GPIO_OUTPUT 1 + +#define SUNXI_GPA0_ERXD3 2 +#define SUNXI_GPA0_SPI1_CS0 3 +#define SUNXI_GPA0_UART2_RTS 4 + +#define SUNXI_GPA1_ERXD2 2 +#define SUNXI_GPA1_SPI1_CLK 3 +#define SUNXI_GPA1_UART2_CTS 4 + +#define SUNXI_GPA2_ERXD1 2 +#define SUNXI_GPA2_SPI1_MOSI 3 +#define SUNXI_GPA2_UART2_TX 4 + +#define SUNXI_GPA10_UART1_TX 4 +#define SUNXI_GPA11_UART1_RX 4 + +#define SUN4I_GPB22_UART0_TX 2 +#define SUN4I_GPB23_UART0_RX 2 + +#define SUN5I_GPB19_UART0_TX 2 +#define SUN5I_GPB20_UART0_RX 2 + +#define SUN5I_GPG3_UART0_TX 4 +#define SUN5I_GPG4_UART0_RX 4 + +#define SUNXI_GPC2_NCLE 2 +#define SUNXI_GPC2_SPI0_CLK 3 + +#define SUNXI_GPC6_NRB0 2 +#define SUNXI_GPC6_SDC2_CMD 3 + +#define SUNXI_GPC7_NRB1 2 +#define SUNXI_GPC7_SDC2_CLK 3 + +#define SUNXI_GPC8_NDQ0 2 +#define SUNXI_GPC8_SDC2_D0 3 + +#define SUNXI_GPC9_NDQ1 2 +#define SUNXI_GPC9_SDC2_D1 3 + +#define SUNXI_GPC10_NDQ2 2 +#define SUNXI_GPC10_SDC2_D2 3 + +#define SUNXI_GPC11_NDQ3 2 +#define SUNXI_GPC11_SDC2_D3 3 + +#define SUNXI_GPF2_SDC0_CLK 2 +#define SUNXI_GPF2_UART0_TX 4 + +#define SUNXI_GPF4_SDC0_D3 2 +#define SUNXI_GPF4_UART0_RX 4 + +int sunxi_gpio_set_cfgpin(u32 pin, u32 val); +int sunxi_gpio_get_cfgpin(u32 pin); +int sunxi_gpio_set_drv(u32 pin, u32 val); +int sunxi_gpio_set_pull(u32 pin, u32 val); +int name_to_gpio(const char *name); +#define name_to_gpio name_to_gpio + +#endif /* _SUNXI_GPIO_H */

Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section in ldscripts" vs v2014.01.

This has been stripped back for mainlining and supports only sun7i. These changes are not useful by themselves but are split out to make the patch sizes more manageable.

As well as the following signed-off-by the sunxi branch shows commits to these files authored by the following: Alejandro Mery Carl van Schaik Tom Cubie

Signed-off-by: Alexandru Gagniuc mr.nuke.me@gmail.com Signed-off-by: Emilio López emilio@elopez.com.ar Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Henrik Nordstrom henrik@henriknordstrom.net Signed-off-by: Ian Campbell ijc@hellion.org.uk Signed-off-by: Luke Leighton lkcl@lkcl.net Signed-off-by: Oliver Schinagl oliver@schinagl.nl Signed-off-by: Stefan Roese sr@denx.de Signed-off-by: Ian Campbell ijc@hellion.org.uk --- arch/arm/cpu/armv7/sunxi/Makefile | 1 + arch/arm/cpu/armv7/sunxi/dram.c | 530 +++++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/dram.h | 191 ++++++++++++ 3 files changed, 722 insertions(+) create mode 100644 arch/arm/cpu/armv7/sunxi/dram.c create mode 100644 arch/arm/include/asm/arch-sunxi/dram.h

diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index b4298c0..41d843f 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -25,5 +25,6 @@ #

obj-y += timer.o +obj-y += dram.o obj-y += clock.o obj-y += pinmux.o diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c new file mode 100644 index 0000000..81b1f50 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/dram.c @@ -0,0 +1,530 @@ +/* + * sunxi DRAM controller initialization + * (C) Copyright 2012 Henrik Nordstrom henrik@henriknordstrom.net + * (C) Copyright 2013 Luke Kenneth Casson Leighton lkcl@lkcl.net + * + * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c + * and earlier U-Boot Allwiner A10 SPL work + * + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Berg Xing bergxing@allwinnertech.com + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/dram.h> +#include <asm/arch/timer.h> +#include <asm/arch/sys_proto.h> + +#define CPU_CFG_CHIP_VER(n) ((n) << 6) +#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3) +#define CPU_CFG_CHIP_REV_A 0x0 +#define CPU_CFG_CHIP_REV_C1 0x1 +#define CPU_CFG_CHIP_REV_C2 0x2 +#define CPU_CFG_CHIP_REV_B 0x3 + +static void mctl_ddr3_reset(void) +{ + struct sunxi_dram_reg *dram = + (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + { + clrbits_le32(&dram->mcr, DRAM_MCR_RESET); + udelay(2); + setbits_le32(&dram->mcr, DRAM_MCR_RESET); + } +} + +static void mctl_set_drive(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28), + DRAM_MCR_MODE_EN(0x3) | + 0xffc); +} + +static void mctl_itm_disable(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF); +} + +static void mctl_itm_enable(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF); +} + +static void mctl_enable_dll0(u32 phase) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, + ((phase >> 16) & 0x3f) << 6); + clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE); + udelay(2); + + clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE); + udelay(22); + + clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET); + udelay(22); +} + +/* + * Note: This differs from pm/standby in that it checks the bus width + */ +static void mctl_enable_dllx(u32 phase) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 i, n, bus_width; + + bus_width = readl(&dram->dcr); + + if ((bus_width & DRAM_DCR_BUS_WIDTH_MASK) == + DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT)) + n = DRAM_DCR_NR_DLLCR_32BIT; + else + n = DRAM_DCR_NR_DLLCR_16BIT; + + for (i = 1; i < n; i++) { + clrsetbits_le32(&dram->dllcr[i], 0xf << 14, + (phase & 0xf) << 14); + clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET, + DRAM_DLLCR_DISABLE); + phase >>= 4; + } + udelay(2); + + for (i = 1; i < n; i++) + clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET | + DRAM_DLLCR_DISABLE); + udelay(22); + + for (i = 1; i < n; i++) + clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE, + DRAM_DLLCR_NRESET); + udelay(22); +} + +static u32 hpcr_value[32] = { + 0x0301, 0x0301, 0x0301, 0x0301, + 0x0301, 0x0301, 0x0301, 0x0301, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0x1031, 0x1031, 0x0735, 0x1035, + 0x1035, 0x0731, 0x1031, 0x0735, + 0x1035, 0x1031, 0x0731, 0x1035, + 0x0001, 0x1031, 0, 0x1031 + /* last row differs from boot0 source table + * 0x1031, 0x0301, 0x0301, 0x0731 + * but boot0 code skips #28 and #30, and sets #29 and #31 to the + * value from #28 entry (0x1031) + */ +}; + +static void mctl_configure_hostport(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 i; + + for (i = 0; i < 32; i++) + writel(hpcr_value[i], &dram->hpcr[i]); +} + +static void mctl_setup_dram_clock(u32 clk) +{ + u32 reg_val; + struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* setup DRAM PLL */ + reg_val = readl(&ccm->pll5_cfg); + reg_val &= ~CCM_PLL5_CTRL_M_MASK; /* set M to 0 (x1) */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); + reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */ + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2)); + reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */ + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24)); + reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */ + reg_val |= CCM_PLL5_CTRL_P(CCM_PLL5_CTRL_P_X(2)); + reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN; /* PLL VCO Gain off */ + reg_val |= CCM_PLL5_CTRL_EN; /* PLL On */ + writel(reg_val, &ccm->pll5_cfg); + udelay(5500); + + setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK); + + /* reset GPS */ + clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE); + setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS); + udelay(1); + clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS); + + /* setup MBUS clock */ + reg_val = CCM_MBUS_CTRL_GATE | + CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) | + CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(2)) | + CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2)); + writel(reg_val, &ccm->mbus_clk_cfg); + + /* + * open DRAMC AHB & DLL register clock + * close it first + */ + clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); + udelay(22); + + /* then open it */ + setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); + udelay(22); +} + +static int dramc_scan_readpipe(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 reg_val; + + /* data training trigger */ + clrbits_le32(&dram->csr, DRAM_CSR_FAILED); + setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING); + + /* check whether data training process has completed */ + while (readl(&dram->ccr) & DRAM_CCR_DATA_TRAINING); + + /* check data training result */ + reg_val = readl(&dram->csr); + if (reg_val & DRAM_CSR_FAILED) + return -1; + + return 0; +} + +static int dramc_scan_dll_para(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + const u32 dqs_dly[7] = {0x3, 0x2, 0x1, 0x0, 0xe, 0xd, 0xc}; + const u32 clk_dly[15] = {0x07, 0x06, 0x05, 0x04, 0x03, + 0x02, 0x01, 0x00, 0x08, 0x10, + 0x18, 0x20, 0x28, 0x30, 0x38}; + u32 clk_dqs_count[15]; + u32 dqs_i, clk_i, cr_i; + u32 max_val, min_val; + u32 dqs_index, clk_index; + + /* Find DQS_DLY Pass Count for every CLK_DLY */ + for (clk_i = 0; clk_i < 15; clk_i++) { + clk_dqs_count[clk_i] = 0; + clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, + (clk_dly[clk_i] & 0x3f) << 6); + for (dqs_i = 0; dqs_i < 7; dqs_i++) { + for (cr_i = 1; cr_i < 5; cr_i++) { + clrsetbits_le32(&dram->dllcr[cr_i], + 0x4f << 14, + (dqs_dly[dqs_i] & 0x4f) << 14); + } + udelay(2); + if (dramc_scan_readpipe() == 0) + clk_dqs_count[clk_i]++; + } + } + /* Test DQS_DLY Pass Count for every CLK_DLY from up to down */ + for (dqs_i = 15; dqs_i > 0; dqs_i--) { + max_val = 15; + min_val = 15; + for (clk_i = 0; clk_i < 15; clk_i++) { + if (clk_dqs_count[clk_i] == dqs_i) { + max_val = clk_i; + if (min_val == 15) + min_val = clk_i; + } + } + if (max_val < 15) + break; + } + + /* Check if Find a CLK_DLY failed */ + if (!dqs_i) + goto fail; + + /* Find the middle index of CLK_DLY */ + clk_index = (max_val + min_val) >> 1; + if ((max_val == (15 - 1)) && (min_val > 0)) + /* if CLK_DLY[MCTL_CLK_DLY_COUNT] is very good, then the middle + * value can be more close to the max_val + */ + clk_index = (15 + clk_index) >> 1; + else if ((max_val < (15 - 1)) && (min_val == 0)) + /* if CLK_DLY[0] is very good, then the middle value can be more + * close to the min_val + */ + clk_index >>= 1; + if (clk_dqs_count[clk_index] < dqs_i) + clk_index = min_val; + + /* Find the middle index of DQS_DLY for the CLK_DLY got above, and Scan + * read pipe again + */ + clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, + (clk_dly[clk_index] & 0x3f) << 6); + max_val = 7; + min_val = 7; + for (dqs_i = 0; dqs_i < 7; dqs_i++) { + clk_dqs_count[dqs_i] = 0; + for (cr_i = 1; cr_i < 5; cr_i++) { + clrsetbits_le32(&dram->dllcr[cr_i], + 0x4f << 14, + (dqs_dly[dqs_i] & 0x4f) << 14); + } + udelay(2); + if (dramc_scan_readpipe() == 0) { + clk_dqs_count[dqs_i] = 1; + max_val = dqs_i; + if (min_val == 7) + min_val = dqs_i; + } + } + + if (max_val < 7) { + dqs_index = (max_val + min_val) >> 1; + if ((max_val == (7-1)) && (min_val > 0)) + dqs_index = (7 + dqs_index) >> 1; + else if ((max_val < (7-1)) && (min_val == 0)) + dqs_index >>= 1; + if (!clk_dqs_count[dqs_index]) + dqs_index = min_val; + for (cr_i = 1; cr_i < 5; cr_i++) { + clrsetbits_le32(&dram->dllcr[cr_i], + 0x4f << 14, + (dqs_dly[dqs_index] & 0x4f) << 14); + } + udelay(2); + return dramc_scan_readpipe(); + } + +fail: + clrbits_le32(&dram->dllcr[0], 0x3f << 6); + for (cr_i = 1; cr_i < 5; cr_i++) + clrbits_le32(&dram->dllcr[cr_i], 0x4f << 14); + udelay(2); + + return dramc_scan_readpipe(); +} + +static void dramc_clock_output_en(u32 on) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + if (on) + setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT); + else + clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT); +} + + +static void dramc_set_autorefresh_cycle(u32 clk) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 reg_val; + u32 tmp_val; + reg_val = 0x83; + + tmp_val = (7987 * clk) >> 10; + tmp_val = tmp_val * 9 - 200; + reg_val |= tmp_val << 8; + reg_val |= 0x8 << 24; + writel(reg_val, &dram->drr); +} + +unsigned long dramc_init(struct dram_para *para) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 reg_val; + int ret_val; + + /* check input dram parameter structure */ + if (!para) + return 0; + + /* setup DRAM relative clock */ + mctl_setup_dram_clock(para->clock); + + /* reset external DRAM */ + mctl_ddr3_reset(); + mctl_set_drive(); + + /* dram clock off */ + dramc_clock_output_en(0); + + mctl_itm_disable(); + mctl_enable_dll0(para->tpr3); + + /* configure external DRAM */ + reg_val = 0x0; + if (para->type == DRAM_MEMORY_TYPE_DDR3) + reg_val |= DRAM_DCR_TYPE_DDR3; + reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3); + + if (para->density == 256) + reg_val |= DRAM_DCR_CHIP_DENSITY(DRAM_DCR_CHIP_DENSITY_256M); + else if (para->density == 512) + reg_val |= DRAM_DCR_CHIP_DENSITY(DRAM_DCR_CHIP_DENSITY_512M); + else if (para->density == 1024) + reg_val |= DRAM_DCR_CHIP_DENSITY(DRAM_DCR_CHIP_DENSITY_1024M); + else if (para->density == 2048) + reg_val |= DRAM_DCR_CHIP_DENSITY(DRAM_DCR_CHIP_DENSITY_2048M); + else if (para->density == 4096) + reg_val |= DRAM_DCR_CHIP_DENSITY(DRAM_DCR_CHIP_DENSITY_4096M); + else if (para->density == 8192) + reg_val |= DRAM_DCR_CHIP_DENSITY(DRAM_DCR_CHIP_DENSITY_8192M); + else + reg_val |= DRAM_DCR_CHIP_DENSITY(DRAM_DCR_CHIP_DENSITY_256M); + + reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1); + reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1); + reg_val |= DRAM_DCR_CMD_RANK_ALL; + reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE); + writel(reg_val, &dram->dcr); + + setbits_le32(&dram->zqcr1, (0x1 << 24) | (0x1 << 1)); + if (para->tpr4 & 0x2) + clrsetbits_le32(&dram->zqcr1, (0x1 << 24), (0x1 << 1)); + dramc_clock_output_en(1); + + /* set odt impendance divide ratio */ + reg_val = ((para->zq) >> 8) & 0xfffff; + reg_val |= ((para->zq) & 0xff) << 20; + reg_val |= (para->zq) & 0xf0000000; + writel(reg_val, &dram->zqcr0); + + /* Set CKE Delay to about 1ms */ + setbits_le32(&dram->idcr, 0x1ffff); + + if ((readl(&dram->ppwrsctl) & 0x1) != 0x1) + mctl_ddr3_reset(); + else + setbits_le32(&dram->mcr, DRAM_MCR_RESET); + + udelay(1); + + while (readl(&dram->ccr) & DRAM_CCR_INIT); + + mctl_enable_dllx(para->tpr3); + + /* set refresh period */ + dramc_set_autorefresh_cycle(para->clock); + + /* set timing parameters */ + writel(para->tpr0, &dram->tpr0); + writel(para->tpr1, &dram->tpr1); + writel(para->tpr2, &dram->tpr2); + + if (para->type == DRAM_MEMORY_TYPE_DDR3) { + reg_val = DRAM_MR_BURST_LENGTH(0x0); + reg_val |= DRAM_MR_POWER_DOWN; + reg_val |= DRAM_MR_CAS_LAT(para->cas - 4); + reg_val |= DRAM_MR_WRITE_RECOVERY(0x5); + } else if (para->type == DRAM_MEMORY_TYPE_DDR2) { + reg_val = DRAM_MR_BURST_LENGTH(0x2); + reg_val |= DRAM_MR_CAS_LAT(para->cas); + reg_val |= DRAM_MR_WRITE_RECOVERY(0x5); + } + writel(reg_val, &dram->mr); + + writel(para->emr1, &dram->emr); + writel(para->emr2, &dram->emr2); + writel(para->emr3, &dram->emr3); + + /* set DQS window mode */ + clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE); + + /* Command rate timing mode 2T & 1T */ + if (para->tpr4 & 0x1) + setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T); + /* reset external DRAM */ + setbits_le32(&dram->ccr, DRAM_CCR_INIT); + while (readl(&dram->ccr) & DRAM_CCR_INIT); + + /* setup zq calibration manual */ + reg_val = readl(&dram->ppwrsctl); + if ((reg_val & 0x1) == 1) { + /* super_standby_flag = 1 */ + + reg_val = readl(0x01c20c00 + 0x120); /* rtc */ + reg_val &= 0x000fffff; + reg_val |= 0x17b00000; + writel(reg_val, &dram->zqcr0); + + /* exit self-refresh state */ + clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27); + /* check whether command has been executed */ + while (readl(&dram->dcr) & (0x1 << 31)); + + udelay(2); + + /* dram pad hold off */ + setbits_le32(&dram->ppwrsctl, 0x16510000); + + while (readl(&dram->ppwrsctl) & 0x1); + + /* exit self-refresh state */ + clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27); + + /* check whether command has been executed */ + while (readl(&dram->dcr) & (0x1 << 31)); + udelay(2);; + + /* issue a refresh command */ + clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x13 << 27); + while (readl(&dram->dcr) & (0x1 << 31)); + + udelay(2); + } + + /* scan read pipe value */ + mctl_itm_enable(); + if (para->tpr3 & (0x1 << 31)) { + ret_val = dramc_scan_dll_para(); + if (ret_val == 0) + para->tpr3 = + (((readl(&dram->dllcr[0]) >> 6) & 0x3f) << 16) | + (((readl(&dram->dllcr[1]) >> 14) & 0xf) << 0) | + (((readl(&dram->dllcr[2]) >> 14) & 0xf) << 4) | + (((readl(&dram->dllcr[3]) >> 14) & 0xf) << 8) | + (((readl(&dram->dllcr[4]) >> 14) & 0xf) << 12 + ); + } else { + ret_val = dramc_scan_readpipe(); + } + + if (ret_val < 0) + return 0; + + /* configure all host port */ + mctl_configure_hostport(); + + return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE); +} diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h new file mode 100644 index 0000000..d2d18f0 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -0,0 +1,191 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Berg Xing bergxing@allwinnertech.com + * Tom Cubie tangliang@allwinnertech.com + * + * Sunxi platform dram register definition. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SUNXI_DRAM_H +#define _SUNXI_DRAM_H + +#include <linux/types.h> + +struct sunxi_dram_reg { + u32 ccr; /* 0x00 controller configuration register */ + u32 dcr; /* 0x04 dram configuration register */ + u32 iocr; /* 0x08 i/o configuration register */ + u32 csr; /* 0x0c controller status register */ + u32 drr; /* 0x10 dram refresh register */ + u32 tpr0; /* 0x14 dram timing parameters register 0 */ + u32 tpr1; /* 0x18 dram timing parameters register 1 */ + u32 tpr2; /* 0x1c dram timing parameters register 2 */ + u32 gdllcr; /* 0x20 global dll control register */ + u8 res0[0x28]; + u32 rslr0; /* 0x4c rank system latency register */ + u32 rslr1; /* 0x50 rank system latency register */ + u8 res1[0x8]; + u32 rdgr0; /* 0x5c rank dqs gating register */ + u32 rdgr1; /* 0x60 rank dqs gating register */ + u8 res2[0x34]; + u32 odtcr; /* 0x98 odt configuration register */ + u32 dtr0; /* 0x9c data training register 0 */ + u32 dtr1; /* 0xa0 data training register 1 */ + u32 dtar; /* 0xa4 data training address register */ + u32 zqcr0; /* 0xa8 zq control register 0 */ + u32 zqcr1; /* 0xac zq control register 1 */ + u32 zqsr; /* 0xb0 zq status register */ + u32 idcr; /* 0xb4 initializaton delay configure reg */ + u8 res3[0x138]; + u32 mr; /* 0x1f0 mode register */ + u32 emr; /* 0x1f4 extended mode register */ + u32 emr2; /* 0x1f8 extended mode register */ + u32 emr3; /* 0x1fc extended mode register */ + u32 dllctr; /* 0x200 dll control register */ + u32 dllcr[5]; /* 0x204 dll control register 0(byte 0) */ + /* 0x208 dll control register 1(byte 1) */ + /* 0x20c dll control register 2(byte 2) */ + /* 0x210 dll control register 3(byte 3) */ + /* 0x214 dll control register 4(byte 4) */ + u32 dqtr0; /* 0x218 dq timing register */ + u32 dqtr1; /* 0x21c dq timing register */ + u32 dqtr2; /* 0x220 dq timing register */ + u32 dqtr3; /* 0x224 dq timing register */ + u32 dqstr; /* 0x228 dqs timing register */ + u32 dqsbtr; /* 0x22c dqsb timing register */ + u32 mcr; /* 0x230 mode configure register */ + u8 res[0x8]; + u32 ppwrsctl; /* 0x23c pad power save control */ + u32 apr; /* 0x240 arbiter period register */ + u32 pldtr; /* 0x244 priority level data threshold reg */ + u8 res5[0x8]; + u32 hpcr[32]; /* 0x250 host port configure register */ + u8 res6[0x10]; + u32 csel; /* 0x2e0 controller select register */ +}; + +struct dram_para { + u32 clock; + u32 type; + u32 rank_num; + u32 density; + u32 io_width; + u32 bus_width; + u32 cas; + u32 zq; + u32 odt_en; + u32 size; + u32 tpr0; + u32 tpr1; + u32 tpr2; + u32 tpr3; + u32 tpr4; + u32 tpr5; + u32 emr1; + u32 emr2; + u32 emr3; +}; + +#define DRAM_CCR_COMMAND_RATE_1T (0x1 << 5) +#define DRAM_CCR_DQS_GATE (0x1 << 14) +#define DRAM_CCR_DQS_DRIFT_COMP (0x1 << 17) +#define DRAM_CCR_ITM_OFF (0x1 << 28) +#define DRAM_CCR_DATA_TRAINING (0x1 << 30) +#define DRAM_CCR_INIT (0x1 << 31) + +#define DRAM_MEMORY_TYPE_DDR1 1 +#define DRAM_MEMORY_TYPE_DDR2 2 +#define DRAM_MEMORY_TYPE_DDR3 3 +#define DRAM_MEMORY_TYPE_LPDDR2 4 +#define DRAM_MEMORY_TYPE_LPDDR 5 +#define DRAM_DCR_TYPE (0x1 << 0) +#define DRAM_DCR_TYPE_DDR2 0x0 +#define DRAM_DCR_TYPE_DDR3 0x1 +#define DRAM_DCR_IO_WIDTH(n) (((n) & 0x3) << 1) +#define DRAM_DCR_IO_WIDTH_MASK DRAM_DCR_IO_WIDTH(0x3) +#define DRAM_DCR_IO_WIDTH_8BIT 0x0 +#define DRAM_DCR_IO_WIDTH_16BIT 0x1 +#define DRAM_DCR_CHIP_DENSITY(n) (((n) & 0x7) << 3) +#define DRAM_DCR_CHIP_DENSITY_MASK DRAM_DCR_CHIP_DENSITY(0x7) +#define DRAM_DCR_CHIP_DENSITY_256M 0x0 +#define DRAM_DCR_CHIP_DENSITY_512M 0x1 +#define DRAM_DCR_CHIP_DENSITY_1024M 0x2 +#define DRAM_DCR_CHIP_DENSITY_2048M 0x3 +#define DRAM_DCR_CHIP_DENSITY_4096M 0x4 +#define DRAM_DCR_CHIP_DENSITY_8192M 0x5 +#define DRAM_DCR_BUS_WIDTH(n) (((n) & 0x7) << 6) +#define DRAM_DCR_BUS_WIDTH_MASK DRAM_DCR_BUS_WIDTH(0x7) +#define DRAM_DCR_BUS_WIDTH_32BIT 0x3 +#define DRAM_DCR_BUS_WIDTH_16BIT 0x1 +#define DRAM_DCR_BUS_WIDTH_8BIT 0x0 +#define DRAM_DCR_NR_DLLCR_32BIT 5 +#define DRAM_DCR_NR_DLLCR_16BIT 3 +#define DRAM_DCR_NR_DLLCR_8BIT 2 +#define DRAM_DCR_RANK_SEL(n) (((n) & 0x3) << 10) +#define DRAM_DCR_RANK_SEL_MASK DRAM_DCR_CMD_RANK(0x3) +#define DRAM_DCR_CMD_RANK_ALL (0x1 << 12) +#define DRAM_DCR_MODE(n) (((n) & 0x3) << 13) +#define DRAM_DCR_MODE_MASK DRAM_DCR_MODE(0x3) +#define DRAM_DCR_MODE_SEQ 0x0 +#define DRAM_DCR_MODE_INTERLEAVE 0x1 + +#define DRAM_CSR_FAILED (0x1 << 20) + +#define DRAM_MCR_MODE_NORM(n) (((n) & 0x3) << 0) +#define DRAM_MCR_MODE_NORM_MASK DRAM_MCR_MOD_NORM(0x3) +#define DRAM_MCR_MODE_DQ_OUT(n) (((n) & 0x3) << 2) +#define DRAM_MCR_MODE_DQ_OUT_MASK DRAM_MCR_MODE_DQ_OUT(0x3) +#define DRAM_MCR_MODE_ADDR_OUT(n) (((n) & 0x3) << 4) +#define DRAM_MCR_MODE_ADDR_OUT_MASK DRAM_MCR_MODE_ADDR_OUT(0x3) +#define DRAM_MCR_MODE_DQ_IN_OUT(n) (((n) & 0x3) << 6) +#define DRAM_MCR_MODE_DQ_IN_OUT_MASK DRAM_MCR_MODE_DQ_IN_OUT(0x3) +#define DRAM_MCR_MODE_DQ_TURNON_DELAY(n) (((n) & 0x7) << 8) +#define DRAM_MCR_MODE_DQ_TURNON_DELAY_MASK DRAM_MCR_MODE_DQ_TURNON_DELAY(0x7) +#define DRAM_MCR_MODE_ADDR_IN (0x1 << 11) +#define DRAM_MCR_RESET (0x1 << 12) +#define DRAM_MCR_MODE_EN(n) (((n) & 0x3) << 13) +#define DRAM_MCR_MODE_EN_MASK DRAM_MCR_MOD_EN(0x3) +#define DRAM_MCR_DCLK_OUT (0x1 << 16) + +#define DRAM_DLLCR_NRESET (0x1 << 30) +#define DRAM_DLLCR_DISABLE (0x1 << 31) + +#define DRAM_ZQCR0_IMP_DIV(n) (((n) & 0xff) << 20) +#define DRAM_ZQCR0_IMP_DIV_MASK DRAM_ZQCR0_IMP_DIV(0xff) + +#define DRAM_IOCR_ODT_EN(n) ((((n) & 0x3) << 30) | ((n) & 0x3) << 0) +#define DRAM_IOCR_ODT_EN_MASK DRAM_IOCR_ODT_EN(0x3) + +#define DRAM_MR_BURST_LENGTH(n) (((n) & 0x7) << 0) +#define DRAM_MR_BURST_LENGTH_MASK DRAM_MR_BURST_LENGTH(0x7) +#define DRAM_MR_CAS_LAT(n) (((n) & 0x7) << 4) +#define DRAM_MR_CAS_LAT_MASK DRAM_MR_CAS_LAT(0x7) +#define DRAM_MR_WRITE_RECOVERY(n) (((n) & 0x7) << 9) +#define DRAM_MR_WRITE_RECOVERY_MASK DRAM_MR_WRITE_RECOVERY(0x7) +#define DRAM_MR_POWER_DOWN (0x1 << 12) + +#define DRAM_CSEL_MAGIC 0x16237495 + +unsigned long sunxi_dram_init(void); +unsigned long dramc_init(struct dram_para *para); + +#endif /* _SUNXI_DRAM_H */

Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section in ldscripts" vs v2014.01.

This has been stripped back for mainlining and supports only sun7i. These changes are not useful by themselves but are split out to make the patch sizes more manageable.

As well as the following signed-off-by the sunxi branch shows commits to these files authored by the following: Almo Nito Carl van Schaik FUKAUMI Naoki hehopmajieh j Sergey Lapin Tom Cubie

Signed-off-by: Aleksei Mamlin mamlinav@gmail.com Signed-off-by: Alexandru Gagniuc mr.nuke.me@gmail.com Signed-off-by: Chen-Yu Tsai wens@csie.org Signed-off-by: Emilio López emilio@elopez.com.ar Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Henrik Nordstrom henrik@henriknordstrom.net Signed-off-by: Ian Campbell ijc@hellion.org.uk Signed-off-by: Jens Kuske jenskuske@gmail.com Signed-off-by: Luc Verhaegen libv@skynet.be Signed-off-by: Luke Leighton lkcl@lkcl.net Signed-off-by: Oliver Schinagl oliver@schinagl.nl Signed-off-by: Patrick Wood patrickhwood@gmail.com Signed-off-by: Stefan Roese sr@denx.de Signed-off-by: Wills Wang wills.wang.open@gmail.com Signed-off-by: Ian Campbell ijc@hellion.org.uk --- arch/arm/cpu/armv7/sunxi/Makefile | 11 +++ arch/arm/cpu/armv7/sunxi/board.c | 104 +++++++++++++++++++++++++ arch/arm/cpu/armv7/sunxi/cpu_info.c | 35 +++++++++ arch/arm/cpu/armv7/sunxi/start.c | 1 + arch/arm/include/asm/arch-sunxi/cpu.h | 138 ++++++++++++++++++++++++++++++++++ board/sunxi/Makefile | 28 +++++++ board/sunxi/board.c | 91 ++++++++++++++++++++++ 7 files changed, 408 insertions(+) create mode 100644 arch/arm/cpu/armv7/sunxi/board.c create mode 100644 arch/arm/cpu/armv7/sunxi/cpu_info.c create mode 100644 arch/arm/cpu/armv7/sunxi/start.c create mode 100644 arch/arm/include/asm/arch-sunxi/cpu.h create mode 100644 board/sunxi/Makefile create mode 100644 board/sunxi/board.c

diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 41d843f..3e8a36c 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -26,5 +26,16 @@

obj-y += timer.o obj-y += dram.o +obj-y += board.o obj-y += clock.o obj-y += pinmux.o + +ifndef CONFIG_SPL_BUILD +obj-y += cpu_info.o +endif + +ifdef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_FEL +obj-y += start.o +endif +endif diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c new file mode 100644 index 0000000..98cad43 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -0,0 +1,104 @@ +/* + * (C) Copyright 2012 Henrik Nordstrom henrik@henriknordstrom.net + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * Some init for sunxi platform. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <serial.h> +#ifdef CONFIG_SPL_BUILD +#include <spl.h> +#endif +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/timer.h> + +#ifdef CONFIG_SPL_BUILD +/* Pointer to the global data structure for SPL */ +DECLARE_GLOBAL_DATA_PTR; + +/* The sunxi internal brom will try to loader external bootloader + * from mmc0, nannd flash, mmc2. + * Unfortunately we can't check how SPL was loaded so assume + * it's always the first SD/MMC controller + */ +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_MMC1; +} + +/* No confirmation data available in SPL yet. Hardcode bootmode */ +u32 spl_boot_mode(void) +{ + return MMCSD_MODE_RAW; +} +#endif + +int gpio_init(void) +{ + sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX); + sunxi_gpio_set_pull(SUNXI_GPB(23), 1); + + return 0; +} + +void reset_cpu(ulong addr) +{ +} + +/* do some early init */ +void s_init(void) +{ +#if !defined CONFIG_SPL_BUILD + /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */ + asm volatile( + "mrc p15, 0, r0, c1, c0, 1\n" + "orr r0, r0, #0x40\n" + "mcr p15, 0, r0, c1, c0, 1\n"); +#endif + + clock_init(); + timer_init(); + gpio_init(); + +#ifdef CONFIG_SPL_BUILD + gd = &gdata; + preloader_console_init(); + + sunxi_board_init(); +#endif +} + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c new file mode 100644 index 0000000..14093dd --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c @@ -0,0 +1,35 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> + +#ifdef CONFIG_DISPLAY_CPUINFO +int print_cpuinfo(void) +{ + puts("CPU: Allwinner A20 (SUN7I)\n"); + return 0; +} +#endif diff --git a/arch/arm/cpu/armv7/sunxi/start.c b/arch/arm/cpu/armv7/sunxi/start.c new file mode 100644 index 0000000..6b392fa --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/start.c @@ -0,0 +1 @@ +/* Intentionally empty. Only needed to get FEL SPL link line right */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h new file mode 100644 index 0000000..61af3e0 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/cpu.h @@ -0,0 +1,138 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SUNXI_CPU_H +#define _SUNXI_CPU_H + +#define SUNXI_SRAM_A1_BASE 0x00000000 +#define SUNXI_SRAM_A1_SIZE (16 * 1024) /* 16 kiB */ + +#define SUNXI_SRAM_A2_BASE 0x00004000 /* 16 kiB */ +#define SUNXI_SRAM_A3_BASE 0x00008000 /* 13 kiB */ +#define SUNXI_SRAM_A4_BASE 0x0000b400 /* 3 kiB */ +#define SUNXI_SRAM_D_BASE 0x01c00000 +#define SUNXI_SRAM_B_BASE 0x01c00000 /* 64 kiB (secure) */ + +#define SUNXI_SRAMC_BASE 0x01c00000 +#define SUNXI_DRAMC_BASE 0x01c01000 +#define SUNXI_DMA_BASE 0x01c02000 +#define SUNXI_NFC_BASE 0x01c03000 +#define SUNXI_TS_BASE 0x01c04000 +#define SUNXI_SPI0_BASE 0x01c05000 +#define SUNXI_SPI1_BASE 0x01c06000 +#define SUNXI_MS_BASE 0x01c07000 +#define SUNXI_TVD_BASE 0x01c08000 +#define SUNXI_CSI0_BASE 0x01c09000 +#define SUNXI_TVE0_BASE 0x01c0a000 +#define SUNXI_EMAC_BASE 0x01c0b000 +#define SUNXI_LCD0_BASE 0x01c0C000 +#define SUNXI_LCD1_BASE 0x01c0d000 +#define SUNXI_VE_BASE 0x01c0e000 +#define SUNXI_MMC0_BASE 0x01c0f000 +#define SUNXI_MMC1_BASE 0x01c10000 +#define SUNXI_MMC2_BASE 0x01c11000 +#define SUNXI_MMC3_BASE 0x01c12000 +#define SUNXI_USB0_BASE 0x01c13000 +#define SUNXI_USB1_BASE 0x01c14000 +#define SUNXI_SS_BASE 0x01c15000 +#define SUNXI_HDMI_BASE 0x01c16000 +#define SUNXI_SPI2_BASE 0x01c17000 +#define SUNXI_SATA_BASE 0x01c18000 +#define SUNXI_PATA_BASE 0x01c19000 +#define SUNXI_ACE_BASE 0x01c1a000 +#define SUNXI_TVE1_BASE 0x01c1b000 +#define SUNXI_USB2_BASE 0x01c1c000 +#define SUNXI_CSI1_BASE 0x01c1d000 +#define SUNXI_TZASC_BASE 0x01c1e000 +#define SUNXI_SPI3_BASE 0x01c1f000 + +#define SUNXI_CCM_BASE 0x01c20000 +#define SUNXI_INTC_BASE 0x01c20400 +#define SUNXI_PIO_BASE 0x01c20800 +#define SUNXI_TIMER_BASE 0x01c20c00 +#define SUNXI_SPDIF_BASE 0x01c21000 +#define SUNXI_AC97_BASE 0x01c21400 +#define SUNXI_IR0_BASE 0x01c21800 +#define SUNXI_IR1_BASE 0x01c21c00 + +#define SUNXI_IIS_BASE 0x01c22400 +#define SUNXI_LRADC_BASE 0x01c22800 +#define SUNXI_AD_DA_BASE 0x01c22c00 +#define SUNXI_KEYPAD_BASE 0x01c23000 +#define SUNXI_TZPC_BASE 0x01c23400 +#define SUNXI_SID_BASE 0x01c23800 +#define SUNXI_SJTAG_BASE 0x01c23c00 + +#define SUNXI_TP_BASE 0x01c25000 +#define SUNXI_PMU_BASE 0x01c25400 +#define SUNXI_CPUCFG_BASE 0x01c25c00 /* sun7i only ? */ + +#define SUNXI_UART0_BASE 0x01c28000 +#define SUNXI_UART1_BASE 0x01c28400 +#define SUNXI_UART2_BASE 0x01c28800 +#define SUNXI_UART3_BASE 0x01c28c00 +#define SUNXI_UART4_BASE 0x01c29000 +#define SUNXI_UART5_BASE 0x01c29400 +#define SUNXI_UART6_BASE 0x01c29800 +#define SUNXI_UART7_BASE 0x01c29c00 +#define SUNXI_PS2_0_BASE 0x01c2a000 +#define SUNXI_PS2_1_BASE 0x01c2a400 + +#define SUNXI_TWI0_BASE 0x01c2ac00 +#define SUNXI_TWI1_BASE 0x01c2b000 +#define SUNXI_TWI2_BASE 0x01c2b400 + +#define SUNXI_CAN_BASE 0x01c2bc00 + +#define SUNXI_SCR_BASE 0x01c2c400 + +#define SUNXI_GPS_BASE 0x01c30000 +#define SUNXI_MALI400_BASE 0x01c40000 +#define SUNXI_GMAC_BASE 0x01c50000 + +/* module sram */ +#define SUNXI_SRAM_C_BASE 0x01d00000 + +#define SUNXI_DE_FE0_BASE 0x01e00000 +#define SUNXI_DE_FE1_BASE 0x01e20000 +#define SUNXI_DE_BE0_BASE 0x01e60000 +#define SUNXI_DE_BE1_BASE 0x01e40000 +#define SUNXI_MP_BASE 0x01e80000 +#define SUNXI_AVG_BASE 0x01ea0000 + +/* CoreSight Debug Module */ +#define SUNXI_CSDM_BASE 0x3f500000 + +#define SUNXI_DDRII_DDRIII_BASE 0x40000000 /* 2 GiB */ + +#define SUNXI_BROM_BASE 0xffff0000 /* 32 kiB */ + +#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c) + +#ifndef __ASSEMBLY__ +void sunxi_board_init(void); +extern void sunxi_reset(void); +#endif /* __ASSEMBLY__ */ + +#endif /* _CPU_H */ diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile new file mode 100644 index 0000000..b8c26ab --- /dev/null +++ b/board/sunxi/Makefile @@ -0,0 +1,28 @@ +# +# (C) Copyright 2012 Henrik Nordstrom henrik@henriknordstrom.net +# +# Based on some other board Makefile +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +obj-y += board.o diff --git a/board/sunxi/board.c b/board/sunxi/board.c new file mode 100644 index 0000000..bffef4f --- /dev/null +++ b/board/sunxi/board.c @@ -0,0 +1,91 @@ +/* + * (C) Copyright 2012-2013 Henrik Nordstrom henrik@henriknordstrom.net + * (C) Copyright 2013 Luke Kenneth Casson Leighton lkcl@lkcl.net + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie tangliang@allwinnertech.com + * + * Some board init for the Allwinner A10-evb board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/dram.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* add board specific code here */ +int board_init(void) +{ + int id_pfr1; + + gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100); + + asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1)); + debug("id_pfr1: 0x%08x\n", id_pfr1); + /* Generic Timer Extension available? */ + if ((id_pfr1 >> 16) & 0xf) { + debug("Setting CNTFRQ\n"); + /* CNTFRQ == 24 MHz */ + asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000)); + } + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE); + + return 0; +} + +#ifdef CONFIG_SPL_BUILD +void sunxi_board_init(void) +{ + int power_failed = 0; + unsigned long ramsize; + + printf("DRAM:"); + ramsize = sunxi_dram_init(); + if (!ramsize) { + printf(" ?"); + ramsize = sunxi_dram_init(); + } + if (!ramsize) { + printf(" ?"); + ramsize = sunxi_dram_init(); + } + printf(" %lu MiB\n", ramsize >> 20); + if (!ramsize) + hang(); + + /* + * Only clock up the CPU to full speed if we are reasonably + * assured it's being powered with suitable core voltage + */ + if (!power_failed) + clock_set_pll1(912000000); + else + printf("Failed to set core voltage! Can't set CPU frequency\n"); +} +#endif

Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section in ldscripts" vs v2014.01.

Signed-off-by: Oliver Schinagl oliver@schinagl.nl Signed-off-by: Ian Campbell ijc@hellion.org.uk --- board/sunxi/dram_cubietruck.c | 31 +++++++++++++++++++++++++++++++ boards.cfg | 1 + 2 files changed, 32 insertions(+) create mode 100644 board/sunxi/dram_cubietruck.c

diff --git a/board/sunxi/dram_cubietruck.c b/board/sunxi/dram_cubietruck.c new file mode 100644 index 0000000..1e7c94a --- /dev/null +++ b/board/sunxi/dram_cubietruck.c @@ -0,0 +1,31 @@ +/* this file is generated, don't edit it yourself */ + +#include <common.h> +#include <asm/arch/dram.h> + +static struct dram_para dram_para = { + .clock = 432, + .type = 3, + .rank_num = 1, + .density = 8192, + .io_width = 16, + .bus_width = 32, + .cas = 9, + .zq = 0x7f, + .odt_en = 0, + .size = 2048, + .tpr0 = 0x42d899b7, + .tpr1 = 0xa090, + .tpr2 = 0x22a00, + .tpr3 = 0x0, + .tpr4 = 0x1, + .tpr5 = 0x0, + .emr1 = 0x4, + .emr2 = 0x10, + .emr3 = 0x0, +}; + +unsigned long sunxi_dram_init(void) +{ + return dramc_init(&dram_para); +} diff --git a/boards.cfg b/boards.cfg index a8336cc..6c35a40 100644 --- a/boards.cfg +++ b/boards.cfg @@ -353,6 +353,7 @@ Active arm armv7 rmobile renesas koelsch Active arm armv7 s5pc1xx samsung goni s5p_goni - Mateusz Zalega m.zalega@samsung.com Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang mk7.kang@samsung.com Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - - +Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL - Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier mathieu.poirier@linaro.org Active arm armv7 u8500 st-ericsson u8500 u8500_href - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang b18965@freescale.com

Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section in ldscripts" vs v2014.01.

As well as the following signed-off-by the sunxi branch shows commits to these files authored by the following: Stefan Roese Tom Cubie yemao

Signed-off-by: Henrik Nordstrom henrik@henriknordstrom.net Signed-off-by: Luke Leighton lkcl@lkcl.net Signed-off-by: Oliver Schinagl oliver@schinagl.nl Signed-off-by: Wills Wang wills.wang.open@gmail.com Signed-off-by: Ian Campbell ijc@hellion.org.uk --- arch/arm/include/asm/arch-sunxi/mmc.h | 66 ++++ board/sunxi/board.c | 13 + drivers/mmc/Makefile | 1 + drivers/mmc/sunxi_mmc.c | 650 ++++++++++++++++++++++++++++++++++ include/configs/sunxi-common.h | 11 + 5 files changed, 741 insertions(+) create mode 100644 arch/arm/include/asm/arch-sunxi/mmc.h create mode 100755 drivers/mmc/sunxi_mmc.c

diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h new file mode 100644 index 0000000..639a7fc --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -0,0 +1,66 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Aaron leafy.myeh@allwinnertech.com + * + * MMC register definition for allwinner sunxi platform. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SUNXI_MMC_H +#define _SUNXI_MMC_H + +#include <linux/types.h> + +struct sunxi_mmc { + u32 gctrl; /* (0x00) SMC Global Control Register */ + u32 clkcr; /* (0x04) SMC Clock Control Register */ + u32 timeout; /* (0x08) SMC Time Out Register */ + u32 width; /* (0x0c) SMC Bus Width Register */ + u32 blksz; /* (0x10) SMC Block Size Register */ + u32 bytecnt; /* (0x14) SMC Byte Count Register */ + u32 cmd; /* (0x18) SMC Command Register */ + u32 arg; /* (0x1c) SMC Argument Register */ + u32 resp0; /* (0x20) SMC Response Register 0 */ + u32 resp1; /* (0x24) SMC Response Register 1 */ + u32 resp2; /* (0x28) SMC Response Register 2 */ + u32 resp3; /* (0x2c) SMC Response Register 3 */ + u32 imask; /* (0x30) SMC Interrupt Mask Register */ + u32 mint; /* (0x34) SMC Masked Interrupt Status Reg */ + u32 rint; /* (0x38) SMC Raw Interrupt Status Register */ + u32 status; /* (0x3c) SMC Status Register */ + u32 ftrglevel; /* (0x40) SMC FIFO Threshold Watermark Reg */ + u32 funcsel; /* (0x44) SMC Function Select Register */ + u32 cbcr; /* (0x48) SMC CIU Byte Count Register */ + u32 bbcr; /* (0x4c) SMC BIU Byte Count Register */ + u32 dbgc; /* (0x50) SMC Debug Enable Register */ + u32 res0[11]; /* (0x54~0x7c) */ + u32 dmac; /* (0x80) SMC IDMAC Control Register */ + u32 dlba; /* (0x84) SMC IDMAC Descr List Base Addr Reg */ + u32 idst; /* (0x88) SMC IDMAC Status Register */ + u32 idie; /* (0x8c) SMC IDMAC Interrupt Enable Register */ + u32 chda; /* (0x90) */ + u32 cbda; /* (0x94) */ + u32 res1[26]; /* (0x98~0xff) */ + u32 fifo; /* (0x100) SMC FIFO Access Address */ +}; + +int sunxi_mmc_init(int sdc_no); +#endif /* _SUNXI_MMC_H */ diff --git a/board/sunxi/board.c b/board/sunxi/board.c index bffef4f..5dbcf2a 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -30,6 +30,7 @@ #include <common.h> #include <asm/arch/clock.h> #include <asm/arch/dram.h> +#include <asm/arch/mmc.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -59,6 +60,18 @@ int dram_init(void) return 0; }

+#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT); +#if !defined (CONFIG_SPL_BUILD) && defined (CONFIG_MMC_SUNXI_SLOT_EXTRA) + sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA); +#endif + + return 0; +} +#endif + #ifdef CONFIG_SPL_BUILD void sunxi_board_init(void) { diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index e793ed9..c695841 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o obj-$(CONFIG_DWMMC) += dw_mmc.o obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o +obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o ifdef CONFIG_SPL_BUILD diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c new file mode 100755 index 0000000..13eba76 --- /dev/null +++ b/drivers/mmc/sunxi_mmc.c @@ -0,0 +1,650 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Aaron leafy.myeh@allwinnertech.com + * + * MMC driver for allwinner sunxi platform. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <mmc.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc.h> + +static void dumphex32(char *name, char *base, int len) +{ + __u32 i; + + debug("dump %s registers:", name); + for (i = 0; i < len; i += 4) { + if (!(i & 0xf)) + debug("\n0x%p : ", base + i); + debug("0x%08x ", readl(base + i)); + } + debug("\n"); +} + +static void dumpmmcreg(struct sunxi_mmc *reg) +{ + debug("dump mmc registers:\n"); + debug("gctrl 0x%08x\n", reg->gctrl); + debug("clkcr 0x%08x\n", reg->clkcr); + debug("timeout 0x%08x\n", reg->timeout); + debug("width 0x%08x\n", reg->width); + debug("blksz 0x%08x\n", reg->blksz); + debug("bytecnt 0x%08x\n", reg->bytecnt); + debug("cmd 0x%08x\n", reg->cmd); + debug("arg 0x%08x\n", reg->arg); + debug("resp0 0x%08x\n", reg->resp0); + debug("resp1 0x%08x\n", reg->resp1); + debug("resp2 0x%08x\n", reg->resp2); + debug("resp3 0x%08x\n", reg->resp3); + debug("imask 0x%08x\n", reg->imask); + debug("mint 0x%08x\n", reg->mint); + debug("rint 0x%08x\n", reg->rint); + debug("status 0x%08x\n", reg->status); + debug("ftrglevel 0x%08x\n", reg->ftrglevel); + debug("funcsel 0x%08x\n", reg->funcsel); + debug("dmac 0x%08x\n", reg->dmac); + debug("dlba 0x%08x\n", reg->dlba); + debug("idst 0x%08x\n", reg->idst); + debug("idie 0x%08x\n", reg->idie); +} + +struct sunxi_mmc_des { + u32 reserved1_1:1; + u32 dic:1; /* disable interrupt on completion */ + u32 last_des:1; /* 1-this data buffer is the last buffer */ + u32 first_des:1; /* 1-data buffer is the first buffer, + 0-data buffer contained in the next + descriptor is 1st buffer */ + u32 des_chain:1; /* 1-the 2nd address in the descriptor is the + next descriptor address */ + u32 end_of_ring:1; /* 1-last descriptor flag when using dual + data buffer in descriptor */ + u32 reserved1_2:24; + u32 card_err_sum:1; /* transfer error flag */ + u32 own:1; /* des owner:1-idma owns it, 0-host owns it */ +#define SDXC_DES_NUM_SHIFT 16 +#define SDXC_DES_BUFFER_MAX_LEN (1 << SDXC_DES_NUM_SHIFT) + u32 data_buf1_sz:16; + u32 data_buf2_sz:16; + u32 buf_addr_ptr1; + u32 buf_addr_ptr2; +}; + +struct sunxi_mmc_host { + unsigned mmc_no; + uint32_t *mclkreg; + unsigned database; + unsigned fatal_err; + unsigned mod_clk; + struct sunxi_mmc *reg; +}; + +/* support 4 mmc hosts */ +struct mmc mmc_dev[4]; +struct sunxi_mmc_host mmc_host[4]; + +static int mmc_resource_init(int sdc_no) +{ + struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no]; + struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + debug("init mmc %d resource\n", sdc_no); + + switch (sdc_no) { + case 0: + mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE; + mmchost->mclkreg = &ccm->sd0_clk_cfg; + break; + case 1: + mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE; + mmchost->mclkreg = &ccm->sd1_clk_cfg; + break; + case 2: + mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE; + mmchost->mclkreg = &ccm->sd2_clk_cfg; + break; + case 3: + mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE; + mmchost->mclkreg = &ccm->sd3_clk_cfg; + break; + default: + printf("Wrong mmc number %d\n", sdc_no); + return -1; + } + mmchost->database = (unsigned int)mmchost->reg + 0x100; + mmchost->mmc_no = sdc_no; + + return 0; +} + +static int mmc_clk_io_on(int sdc_no) +{ + unsigned int rval; + unsigned int pll5_clk; + unsigned int divider; + struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no]; + static struct sunxi_gpio *gpio_c = + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[SUNXI_GPIO_C]; + static struct sunxi_gpio *gpio_f = + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[SUNXI_GPIO_F]; +#if CONFIG_MMC1_PG + static struct sunxi_gpio *gpio_g = + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[SUNXI_GPIO_G]; +#endif + static struct sunxi_gpio *gpio_h = + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[SUNXI_GPIO_H]; + static struct sunxi_gpio *gpio_i = + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[SUNXI_GPIO_I]; + struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + debug("init mmc %d clock and io\n", sdc_no); + + /* config gpio */ + switch (sdc_no) { + case 0: + /* D1-PF0, D0-PF1, CLK-PF2, CMD-PF3, D3-PF4, D4-PF5 */ + writel(0x222222, &gpio_f->cfg[0]); + writel(0x555, &gpio_f->pull[0]); + writel(0xaaa, &gpio_f->drv[0]); + break; + + case 1: +#if CONFIG_MMC1_PG + /* PG0-CMD, PG1-CLK, PG2~5-D0~3 : 4 */ + writel(0x444444, &gpio_g->cfg[0]); + writel(0x555, &gpio_g->pull[0]); + writel(0xaaa, &gpio_g->drv[0]); +#else + /* PH22-CMD, PH23-CLK, PH24~27-D0~D3 : 5 */ + writel(0x55 << 24, &gpio_h->cfg[2]); + writel(0x5555, &gpio_h->cfg[3]); + writel(0x555 << 12, &gpio_h->pull[1]); + writel(0xaaa << 12, &gpio_h->drv[1]); +#endif + break; + + case 2: + /* CMD-PC6, CLK-PC7, D0-PC8, D1-PC9, D2-PC10, D3-PC11 */ + writel(0x33 << 24, &gpio_c->cfg[0]); + writel(0x3333, &gpio_c->cfg[1]); + writel(0x555 << 12, &gpio_c->pull[0]); + writel(0xaaa << 12, &gpio_c->drv[0]); + break; + + case 3: + /* PI4-CMD, PI5-CLK, PI6~9-D0~D3 : 2 */ + writel(0x2222 << 16, &gpio_i->cfg[0]); + writel(0x22, &gpio_i->cfg[1]); + writel(0x555 << 8, &gpio_i->pull[0]); + writel(0x555 << 8, &gpio_i->drv[0]); + break; + + default: + return -1; + } + + /* config ahb clock */ + rval = readl(&ccm->ahb_gate0); + rval |= (1 << (8 + sdc_no)); + writel(rval, &ccm->ahb_gate0); + + /* config mod clock */ + pll5_clk = clock_get_pll5(); + if (pll5_clk > 400000000) + divider = 4; + else + divider = 3; + writel((0x1 << 31) | (0x2 << 24) | divider, mmchost->mclkreg); + mmchost->mod_clk = pll5_clk / (divider + 1); + + dumphex32("ccmu", (char *)SUNXI_CCM_BASE, 0x100); + dumphex32("gpio", (char *)SUNXI_PIO_BASE, 0x100); + dumphex32("mmc", (char *)mmchost->reg, 0x100); + dumpmmcreg(mmchost->reg); + + return 0; +} + +static int mmc_update_clk(struct mmc *mmc) +{ + struct sunxi_mmc_host *mmchost = (struct sunxi_mmc_host *)mmc->priv; + unsigned int cmd; + unsigned timeout = 0xfffff; + + cmd = (0x1 << 31) | (0x1 << 21) | (0x1 << 13); + writel(cmd, &mmchost->reg->cmd); + while ((readl(&mmchost->reg->cmd) & (0x1 << 31)) && timeout--); + if (!timeout) + return -1; + + writel(readl(&mmchost->reg->rint), &mmchost->reg->rint); + + return 0; +} + +static int mmc_config_clock(struct mmc *mmc, unsigned div) +{ + struct sunxi_mmc_host *mmchost = (struct sunxi_mmc_host *)mmc->priv; + unsigned rval = readl(&mmchost->reg->clkcr); + + /* + * CLKCREG[7:0]: divider + * CLKCREG[16]: on/off + * CLKCREG[17]: power save + */ + /* Disable Clock */ + rval &= ~(0x1 << 16); + writel(rval, &mmchost->reg->clkcr); + if (mmc_update_clk(mmc)) + return -1; + + /* Change Divider Factor */ + rval &= ~(0xff); + rval |= div; + writel(rval, &mmchost->reg->clkcr); + if (mmc_update_clk(mmc)) + return -1; + /* Re-enable Clock */ + rval |= (0x1 << 16); + writel(rval, &mmchost->reg->clkcr); + + if (mmc_update_clk(mmc)) + return -1; + + return 0; +} + +static void mmc_set_ios(struct mmc *mmc) +{ + struct sunxi_mmc_host *mmchost = (struct sunxi_mmc_host *)mmc->priv; + unsigned int clkdiv = 0; + + debug("set ios: bus_width: %x, clock: %d, mod_clk: %d\n", + mmc->bus_width, mmc->clock, mmchost->mod_clk); + + /* Change clock first */ + clkdiv = (mmchost->mod_clk + (mmc->clock >> 1)) / mmc->clock / 2; + if (mmc->clock) + if (mmc_config_clock(mmc, clkdiv)) { + mmchost->fatal_err = 1; + return; + } + + /* Change bus width */ + if (mmc->bus_width == 8) + writel(0x2, &mmchost->reg->width); + else if (mmc->bus_width == 4) + writel(0x1, &mmchost->reg->width); + else + writel(0x0, &mmchost->reg->width); +} + +static int mmc_core_init(struct mmc *mmc) +{ + struct sunxi_mmc_host *mmchost = (struct sunxi_mmc_host *)mmc->priv; + + /* Reset controller */ + writel(0x7, &mmchost->reg->gctrl); + + return 0; +} + +static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data) +{ + struct sunxi_mmc_host *mmchost = (struct sunxi_mmc_host *)mmc->priv; + unsigned i; + unsigned byte_cnt = data->blocksize * data->blocks; + unsigned *buff; + unsigned timeout = 0xfffff; + + if (data->flags & MMC_DATA_READ) { + buff = (unsigned int *)data->dest; + for (i = 0; i < (byte_cnt >> 2); i++) { + while (--timeout && + (readl(&mmchost->reg->status) & (0x1 << 2))); + if (timeout <= 0) + goto out; + buff[i] = readl(mmchost->database); + timeout = 0xfffff; + } + } else { + buff = (unsigned int *)data->src; + for (i = 0; i < (byte_cnt >> 2); i++) { + while (--timeout && + (readl(&mmchost->reg->status) & (0x1 << 3))); + if (timeout <= 0) + goto out; + writel(buff[i], mmchost->database); + timeout = 0xfffff; + } + } + +out: + if (timeout <= 0) + return -1; + + return 0; +} + +static int mmc_trans_data_by_dma(struct mmc *mmc, struct mmc_data *data) +{ + struct sunxi_mmc_host *mmchost = (struct sunxi_mmc_host *)mmc->priv; + unsigned byte_cnt = data->blocksize * data->blocks; + unsigned char *buff; + unsigned des_idx = 0; + unsigned buff_frag_num = + (byte_cnt + SDXC_DES_BUFFER_MAX_LEN - 1) >> SDXC_DES_NUM_SHIFT; + unsigned remain; + unsigned i, rval; + ALLOC_CACHE_ALIGN_BUFFER(struct sunxi_mmc_des, pdes, buff_frag_num); + + buff = data->flags & MMC_DATA_READ ? + (unsigned char *)data->dest : (unsigned char *)data->src; + remain = byte_cnt & (SDXC_DES_BUFFER_MAX_LEN - 1); + if (!remain) + remain = SDXC_DES_BUFFER_MAX_LEN; + + flush_cache((unsigned long)buff, (unsigned long)byte_cnt); + for (i = 0; i < buff_frag_num; i++, des_idx++) { + memset((void *)&pdes[des_idx], 0, sizeof(struct sunxi_mmc_des)); + pdes[des_idx].des_chain = 1; + pdes[des_idx].own = 1; + pdes[des_idx].dic = 1; + if (buff_frag_num > 1 && i != buff_frag_num - 1) + pdes[des_idx].data_buf1_sz = + (SDXC_DES_BUFFER_MAX_LEN - + 1) & SDXC_DES_BUFFER_MAX_LEN; + else + pdes[des_idx].data_buf1_sz = remain; + + pdes[des_idx].buf_addr_ptr1 = + (u32) buff + i * SDXC_DES_BUFFER_MAX_LEN; + if (i == 0) + pdes[des_idx].first_des = 1; + + if (i == buff_frag_num - 1) { + pdes[des_idx].dic = 0; + pdes[des_idx].last_des = 1; + pdes[des_idx].end_of_ring = 1; + pdes[des_idx].buf_addr_ptr2 = 0; + } else { + pdes[des_idx].buf_addr_ptr2 = (u32)&pdes[des_idx + 1]; + } + debug("frag %d, remain %d, des[%d](%08x): ", + i, remain, des_idx, (u32)&pdes[des_idx]); + debug("[0] = %08x, [1] = %08x, [2] = %08x, [3] = %08x\n", + (u32)((u32 *)&pdes[des_idx])[0], + (u32)((u32 *)&pdes[des_idx])[1], + (u32)((u32 *)&pdes[des_idx])[2], + (u32)((u32 *)&pdes[des_idx])[3]); + } + flush_cache((unsigned long)pdes, + sizeof(struct sunxi_mmc_des) * (des_idx + 1)); + + /* + * GCTRLREG + * GCTRL[2] : DMA reset + * GCTRL[5] : DMA enable + * + * IDMACREG + * IDMAC[0] : IDMA soft reset + * IDMAC[1] : IDMA fix burst flag + * IDMAC[7] : IDMA on + * + * IDIECREG + * IDIE[0] : IDMA transmit interrupt flag + * IDIE[1] : IDMA receive interrupt flag + */ + rval = readl(&mmchost->reg->gctrl); + /* Enable DMA */ + writel(rval | (0x1 << 5) | (0x1 << 2), &mmchost->reg->gctrl); + /* Reset iDMA */ + writel((0x1 << 0), &mmchost->reg->dmac); + /* Enable iDMA */ + writel((0x1 << 1) | (1 << 7), &mmchost->reg->dmac); + rval = readl(&mmchost->reg->idie) & (~3); + if (data->flags & MMC_DATA_WRITE) + rval |= (0x1 << 0); + else + rval |= (0x1 << 1); + writel(rval, &mmchost->reg->idie); + writel((u32) pdes, &mmchost->reg->dlba); + writel((0x2 << 28) | (0x7 << 16) | (0x01 << 3), + &mmchost->reg->ftrglevel); + + return 0; +} + +static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct sunxi_mmc_host *mmchost = (struct sunxi_mmc_host *)mmc->priv; + unsigned int cmdval = 0x80000000; + signed int timeout = 0; + int error = 0; + unsigned int status = 0; + unsigned int usedma = 0; + unsigned int bytecnt = 0; + + if (mmchost->fatal_err) + return -1; + if (cmd->resp_type & MMC_RSP_BUSY) + debug("mmc cmd %d check rsp busy\n", cmd->cmdidx); + if (cmd->cmdidx == 12) + return 0; + + /* + * CMDREG + * CMD[5:0] : Command index + * CMD[6] : Has response + * CMD[7] : Long response + * CMD[8] : Check response CRC + * CMD[9] : Has data + * CMD[10] : Write + * CMD[11] : Steam mode + * CMD[12] : Auto stop + * CMD[13] : Wait previous over + * CMD[14] : About cmd + * CMD[15] : Send initialization + * CMD[21] : Update clock + * CMD[31] : Load cmd + */ + if (!cmd->cmdidx) + cmdval |= (0x1 << 15); + if (cmd->resp_type & MMC_RSP_PRESENT) + cmdval |= (0x1 << 6); + if (cmd->resp_type & MMC_RSP_136) + cmdval |= (0x1 << 7); + if (cmd->resp_type & MMC_RSP_CRC) + cmdval |= (0x1 << 8); + + if (data) { + if ((u32) data->dest & 0x3) { + error = -1; + goto out; + } + + cmdval |= (0x1 << 9) | (0x1 << 13); + if (data->flags & MMC_DATA_WRITE) + cmdval |= (0x1 << 10); + if (data->blocks > 1) + cmdval |= (0x1 << 12); + writel(data->blocksize, &mmchost->reg->blksz); + writel(data->blocks * data->blocksize, &mmchost->reg->bytecnt); + } + + debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", mmchost->mmc_no, + cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg); + writel(cmd->cmdarg, &mmchost->reg->arg); + + if (!data) + writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd); + + /* + * transfer data and check status + * STATREG[2] : FIFO empty + * STATREG[3] : FIFO full + */ + if (data) { + int ret = 0; + + bytecnt = data->blocksize * data->blocks; + debug("trans data %d bytes\n", bytecnt); +#if defined(CONFIG_MMC_SUNXI_USE_DMA) && !defined(CONFIG_SPL_BUILD) + if (bytecnt > 64) { +#else + if (0) { +#endif + usedma = 1; + writel(readl(&mmchost->reg->gctrl) & ~(0x1 << 31), + &mmchost->reg->gctrl); + ret = mmc_trans_data_by_dma(mmc, data); + writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd); + } else { + writel(readl(&mmchost->reg->gctrl) | 0x1 << 31, + &mmchost->reg->gctrl); + writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd); + ret = mmc_trans_data_by_cpu(mmc, data); + } + if (ret) { + error = readl(&mmchost->reg->rint) & 0xbfc2; + error = TIMEOUT; + goto out; + } + } + + timeout = 0xfffff; + do { + status = readl(&mmchost->reg->rint); + if (!timeout-- || (status & 0xbfc2)) { + error = status & 0xbfc2; + debug("cmd timeout %x\n", error); + error = TIMEOUT; + goto out; + } + } while (!(status & 0x4)); + + if (data) { + unsigned done = 0; + timeout = usedma ? 0xffff * bytecnt : 0xffff; + debug("cacl timeout %x\n", timeout); + do { + status = readl(&mmchost->reg->rint); + if (!timeout-- || (status & 0xbfc2)) { + error = status & 0xbfc2; + debug("data timeout %x\n", error); + error = TIMEOUT; + goto out; + } + if (data->blocks > 1) + done = status & (0x1 << 14); + else + done = status & (0x1 << 3); + } while (!done); + } + + if (cmd->resp_type & MMC_RSP_BUSY) { + timeout = 0xfffff; + do { + status = readl(&mmchost->reg->status); + if (!timeout--) { + debug("busy timeout\n"); + error = TIMEOUT; + goto out; + } + } while (status & (1 << 9)); + } + + if (cmd->resp_type & MMC_RSP_136) { + cmd->response[0] = readl(&mmchost->reg->resp3); + cmd->response[1] = readl(&mmchost->reg->resp2); + cmd->response[2] = readl(&mmchost->reg->resp1); + cmd->response[3] = readl(&mmchost->reg->resp0); + debug("mmc resp 0x%08x 0x%08x 0x%08x 0x%08x\n", + cmd->response[3], cmd->response[2], + cmd->response[1], cmd->response[0]); + } else { + cmd->response[0] = readl(&mmchost->reg->resp0); + debug("mmc resp 0x%08x\n", cmd->response[0]); + } +out: + if (data && usedma) { + /* IDMASTAREG + * IDST[0] : idma tx int + * IDST[1] : idma rx int + * IDST[2] : idma fatal bus error + * IDST[4] : idma descriptor invalid + * IDST[5] : idma error summary + * IDST[8] : idma normal interrupt sumary + * IDST[9] : idma abnormal interrupt sumary + */ + status = readl(&mmchost->reg->idst); + writel(status, &mmchost->reg->idst); + writel(0, &mmchost->reg->idie); + writel(0, &mmchost->reg->dmac); + writel(readl(&mmchost->reg->gctrl) & ~(0x1 << 5), + &mmchost->reg->gctrl); + } + if (error < 0) { + writel(0x7, &mmchost->reg->gctrl); + mmc_update_clk(mmc); + } + writel(0xffffffff, &mmchost->reg->rint); + writel(readl(&mmchost->reg->gctrl) | (1 << 1), &mmchost->reg->gctrl); + + return error; +} + +int sunxi_mmc_init(int sdc_no) +{ + struct mmc *mmc; + + memset(&mmc_dev[sdc_no], 0, sizeof(struct mmc)); + memset(&mmc_host[sdc_no], 0, sizeof(struct sunxi_mmc_host)); + mmc = &mmc_dev[sdc_no]; + + sprintf(mmc->name, "SUNXI SD/MMC"); + mmc->priv = &mmc_host[sdc_no]; + mmc->send_cmd = mmc_send_cmd; + mmc->set_ios = mmc_set_ios; + mmc->init = mmc_core_init; + + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->host_caps = MMC_MODE_4BIT; + mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; + + mmc->f_min = 400000; + mmc->f_max = 52000000; + + mmc_resource_init(sdc_no); + mmc_clk_io_on(sdc_no); + + mmc_register(mmc); + + return 0; +} diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index bdfc169..1afdeb2 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -74,6 +74,16 @@ #define CONFIG_INITRD_TAG #define CONFIG_CMDLINE_EDITING

+/* mmc config */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_MMC +#define CONFIG_MMC_SUNXI +#define CONFIG_MMC_SUNXI_SLOT 0 +#define CONFIG_MMC_SUNXI_USE_DMA +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ + /* * Size of malloc() pool * 1MB = 0x100000, 0x100000 = 1024 * 1024 @@ -118,6 +128,7 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) /* 512 KiB */ #define CONFIG_IDENT_STRING " Allwinner Technology"

+#define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */

#define CONFIG_BOOTDELAY 3

Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section in ldscripts" vs v2014.01.

Signed-off-by: Chen-Yu Tsai wens@csie.org Signed-off-by: Jens Kuske jenskuske@gmail.com Signed-off-by: Ian Campbell ijc@hellion.org.uk --- arch/arm/cpu/armv7/sunxi/board.c | 15 +++++++++ boards.cfg | 4 +-- drivers/net/Makefile | 1 + drivers/net/sunxi_gmac.c | 34 ++++++++++++++++++++ include/configs/sunxi-common.h | 68 ++++++++++++++++++++++++++++++++++++++++ 5 files changed, 120 insertions(+), 2 deletions(-) create mode 100644 drivers/net/sunxi_gmac.c

diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 98cad43..73b4cf0 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -27,6 +27,8 @@ */

#include <common.h> +#include <netdev.h> +#include <miiphy.h> #include <serial.h> #ifdef CONFIG_SPL_BUILD #include <spl.h> @@ -102,3 +104,16 @@ void enable_caches(void) dcache_enable(); } #endif + +#if defined(CONFIG_SUNXI_GMAC) +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ +int cpu_eth_init(bd_t *bis) +{ + sunxi_gmac_initialize(bis); + + return 0; +} +#endif diff --git a/boards.cfg b/boards.cfg index a513376..090e956 100644 --- a/boards.cfg +++ b/boards.cfg @@ -353,8 +353,8 @@ Active arm armv7 rmobile renesas koelsch Active arm armv7 s5pc1xx samsung goni s5p_goni - Mateusz Zalega m.zalega@samsung.com Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang mk7.kang@samsung.com Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - - -Active arm armv7 sunxi - sunxi Cubietruck sun7i:CUBIETRUCK,SPL - -Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL - +Active arm armv7 sunxi - sunxi Cubietruck sun7i:CUBIETRUCK,SPL,SUNXI_GMAC,RGMII - +Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL,SUNXI_GMAC,RGMII - Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier mathieu.poirier@linaro.org Active arm armv7 u8500 st-ericsson u8500 u8500_href - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang b18965@freescale.com diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 7f9ce90..2300c00 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_SH_ETHER) += sh_eth.o obj-$(CONFIG_SMC91111) += smc91111.o obj-$(CONFIG_SMC911X) += smc911x.o obj-$(CONFIG_SUNXI_WEMAC) += sunxi_wemac.o +obj-$(CONFIG_SUNXI_GMAC) += sunxi_gmac.o obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o diff --git a/drivers/net/sunxi_gmac.c b/drivers/net/sunxi_gmac.c new file mode 100644 index 0000000..432d7b2 --- /dev/null +++ b/drivers/net/sunxi_gmac.c @@ -0,0 +1,34 @@ +#include <common.h> +#include <netdev.h> +#include <miiphy.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> + +int sunxi_gmac_initialize(bd_t *bis) +{ + int pin; + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* Set up clock gating */ + setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC); + + /* Set MII clock */ + setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII | + CCM_GMAC_CTRL_GPIT_RGMII); + + /* Configure pin mux settings for GMAC */ + for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { + /* skip unused pins in RGMII mode */ + if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14)) + continue; + sunxi_gpio_set_cfgpin(pin, 5); + sunxi_gpio_set_drv(pin, 3); + } + + designware_initialize(0, SUNXI_GMAC_BASE, 0x1, PHY_INTERFACE_MODE_RGMII); + + return 0; +} diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 1f32304..95a14f2 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -200,6 +200,74 @@

#define CONFIG_CONS_INDEX 1 /* UART0 */

+#ifdef CONFIG_SUNXI_GMAC +#define CONFIG_DESIGNWARE_ETH /* GMAC can use designware driver */ +#define CONFIG_DW_AUTONEG +#define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ +#define CONFIG_SYS_DCACHE_OFF /* dw driver doesn't support dcache */ +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#endif + +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_TIMESTAMP /* Needed by SNTP */ +#define CONFIG_CMD_DNS +#define CONFIG_NETCONSOLE +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET +#define CONFIG_BOOTP_MAY_FAIL +#define CONFIG_BOOTP_SERVERIP +#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 +#define CONFIG_CMD_ELF +#endif + +#define CONFIG_DESIGNWARE_ETH /* GMAC can use designware driver */ +#define CONFIG_DW_AUTONEG +#define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ +#define CONFIG_SYS_DCACHE_OFF /* dw driver doesn't support dcache */ +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_TIMESTAMP /* Needed by SNTP */ +#define CONFIG_CMD_DNS +#define CONFIG_NETCONSOLE +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET +#define CONFIG_BOOTP_MAY_FAIL +#define CONFIG_BOOTP_SERVERIP +#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 +#define CONFIG_CMD_ELF +#endif + #if !defined CONFIG_ENV_IS_IN_MMC && \ !defined CONFIG_ENV_IS_IN_NAND && \ !defined CONFIG_ENV_IS_IN_FAT && \