[U-Boot] [PATCH 1/2] OMAP3: use a single board file for IGEP devices
Even when the IGEPv2 board and the IGEP Computer-on-Module are different from a form factor point of view, they are very similar in the fact that share many components and how they are wired.
So, it is possible (and better) to have a single board file for both devices and just use the CONFIG_MACH_TYPE to make a differentiation between both boards when needed.
This change avoids duplication by removing 298 lines of code and makes future maintenance easier.
Signed-off-by: Javier Martinez Canillas javier.martinez@collabora.co.uk --- board/isee/igep0020/Makefile | 43 --------- board/isee/igep0020/igep0020.c | 177 -------------------------------------- board/isee/igep0020/igep0020.h | 151 -------------------------------- board/isee/igep0030/Makefile | 43 --------- board/isee/igep0030/igep0030.c | 118 ------------------------- board/isee/igep0030/igep0030.h | 151 -------------------------------- board/isee/igep00x0/Makefile | 43 +++++++++ board/isee/igep00x0/igep00x0.c | 186 ++++++++++++++++++++++++++++++++++++++++ board/isee/igep00x0/igep00x0.h | 165 +++++++++++++++++++++++++++++++++++ boards.cfg | 8 +- 10 files changed, 398 insertions(+), 687 deletions(-) delete mode 100644 board/isee/igep0020/Makefile delete mode 100644 board/isee/igep0020/igep0020.c delete mode 100644 board/isee/igep0020/igep0020.h delete mode 100644 board/isee/igep0030/Makefile delete mode 100644 board/isee/igep0030/igep0030.c delete mode 100644 board/isee/igep0030/igep0030.h create mode 100644 board/isee/igep00x0/Makefile create mode 100644 board/isee/igep00x0/igep00x0.c create mode 100644 board/isee/igep00x0/igep00x0.h
diff --git a/board/isee/igep0020/Makefile b/board/isee/igep0020/Makefile deleted file mode 100644 index 00463e1..0000000 --- a/board/isee/igep0020/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := igep0020.o - -SRCS := $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep0020/igep0020.c deleted file mode 100644 index a8257a3..0000000 --- a/board/isee/igep0020/igep0020.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * (C) Copyright 2010 - * ISEE 2007 SL, <www.iseebcn.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <netdev.h> -#include <twl4030.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <asm/arch/mem.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/omap_gpmc.h> -#include <asm/mach-types.h> -#include "igep0020.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* GPMC definitions for LAN9221 chips */ -static const u32 gpmc_lan_config[] = { - NET_LAN9221_GPMC_CONFIG1, - NET_LAN9221_GPMC_CONFIG2, - NET_LAN9221_GPMC_CONFIG3, - NET_LAN9221_GPMC_CONFIG4, - NET_LAN9221_GPMC_CONFIG5, - NET_LAN9221_GPMC_CONFIG6, -}; - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - - return 0; -} - -#ifdef CONFIG_SPL_BUILD -/* - * Routine: omap_rev_string - * Description: For SPL builds output board rev - */ -void omap_rev_string(void) -{ -} - -/* - * Routine: get_board_mem_timings - * Description: If we use SPL then there is no x-loader nor config header - * so we have to setup the DDR timings ourself on both banks. - */ -void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, - u32 *mr) -{ - *mr = MICRON_V_MR_165; -#ifdef CONFIG_BOOT_NAND - *mcfg = MICRON_V_MCFG_200(256 << 20); - *ctrla = MICRON_V_ACTIMA_200; - *ctrlb = MICRON_V_ACTIMB_200; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; -#else - if (get_cpu_family() == CPU_OMAP34XX) { - *mcfg = NUMONYX_V_MCFG_165(256 << 20); - *ctrla = NUMONYX_V_ACTIMA_165; - *ctrlb = NUMONYX_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - - } else { - *mcfg = NUMONYX_V_MCFG_200(256 << 20); - *ctrla = NUMONYX_V_ACTIMA_200; - *ctrlb = NUMONYX_V_ACTIMB_200; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; - } -#endif -} -#endif - -/* - * Routine: setup_net_chip - * Description: Setting up the configuration GPMC registers specific to the - * Ethernet hardware. - */ -#if defined(CONFIG_CMD_NET) -static void setup_net_chip(void) -{ - struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; - - enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000, - GPMC_SIZE_16M); - - /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ - writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); - /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); - /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, - &ctrl_base->gpmc_nadv_ale); - - /* Make GPIO 64 as output pin and send a magic pulse through it */ - if (!gpio_request(64, "")) { - gpio_direction_output(64, 0); - gpio_set_value(64, 1); - udelay(1); - gpio_set_value(64, 0); - udelay(1); - gpio_set_value(64, 1); - } -} -#endif - -#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) -int board_mmc_init(bd_t *bis) -{ - omap_mmc_init(0, 0, 0); - return 0; -} -#endif - -/* - * Routine: misc_init_r - * Description: Configure board specific parts - */ -int misc_init_r(void) -{ - twl4030_power_init(); - -#if defined(CONFIG_CMD_NET) - setup_net_chip(); -#endif - - dieid_num_r(); - - return 0; -} - -/* - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers specific to the - * hardware. Many pins need to be moved from protect to primary - * mode. - */ -void set_muxconf_regs(void) -{ - MUX_DEFAULT(); -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC911X - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); -#endif - return rc; -} diff --git a/board/isee/igep0020/igep0020.h b/board/isee/igep0020/igep0020.h deleted file mode 100644 index 3335ecc..0000000 --- a/board/isee/igep0020/igep0020.h +++ /dev/null @@ -1,151 +0,0 @@ -/* - * (C) Copyright 2010 - * ISEE 2007 SL, <www.iseebcn.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _IGEP0020_H_ -#define _IGEP0020_H_ - -const omap3_sysinfo sysinfo = { - DDR_STACKED, - "IGEP v2 board", -#if defined(CONFIG_ENV_IS_IN_ONENAND) - "ONENAND", -#else - "NAND", -#endif -}; - -static void setup_net_chip(void); - -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ -#define MUX_DEFAULT()\ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /* SDRC_D0 */\ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /* SDRC_D1 */\ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /* SDRC_D2 */\ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /* SDRC_D3 */\ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /* SDRC_D4 */\ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /* SDRC_D5 */\ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /* SDRC_D6 */\ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /* SDRC_D7 */\ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /* SDRC_D8 */\ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /* SDRC_D9 */\ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /* SDRC_D10 */\ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /* SDRC_D11 */\ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /* SDRC_D12 */\ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /* SDRC_D13 */\ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /* SDRC_D14 */\ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /* SDRC_D15 */\ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /* SDRC_D16 */\ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /* SDRC_D17 */\ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /* SDRC_D18 */\ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /* SDRC_D19 */\ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /* SDRC_D20 */\ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /* SDRC_D21 */\ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /* SDRC_D22 */\ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /* SDRC_D23 */\ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /* SDRC_D24 */\ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /* SDRC_D25 */\ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /* SDRC_D26 */\ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /* SDRC_D27 */\ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /* SDRC_D28 */\ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /* SDRC_D29 */\ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /* SDRC_D30 */\ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /* SDRC_D31 */\ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /* SDRC_CLK */\ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /* SDRC_DQS0 */\ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /* SDRC_DQS1 */\ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /* SDRC_DQS2 */\ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /* SDRC_DQS3 */\ - MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /* GPMC_A1 */\ - MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /* GPMC_A2 */\ - MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /* GPMC_A3 */\ - MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /* GPMC_A4 */\ - MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /* GPMC_A5 */\ - MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /* GPMC_A6 */\ - MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /* GPMC_A7 */\ - MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /* GPMC_A8 */\ - MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /* GPMC_A9 */\ - MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /* GPMC_A10 */\ - MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /* GPMC_D0 */\ - MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /* GPMC_D1 */\ - MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /* GPMC_D2 */\ - MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /* GPMC_D3 */\ - MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /* GPMC_D4 */\ - MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /* GPMC_D5 */\ - MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /* GPMC_D6 */\ - MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /* GPMC_D7 */\ - MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /* GPMC_D8 */\ - MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /* GPMC_D9 */\ - MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /* GPMC_D10 */\ - MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /* GPMC_D11 */\ - MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /* GPMC_D12 */\ - MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /* GPMC_D13 */\ - MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /* GPMC_D14 */\ - MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /* GPMC_D15 */\ - MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /* GPMC_nCS0 */\ - MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /* GPMC_nCS1 */\ - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /* GPIO_nCS2 */\ - MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /* GPIO_nCS3 */\ - MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /* GPMC_nCS4 */\ - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /* GPMC_nCS5 */\ - MUX_VAL(CP(GPMC_NCS6), (IDIS | PTU | EN | M0)) /* GPMC_nCS6 */\ - MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | EN | M0)) /* GPMC_nCS7 */\ - MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /* GPMC_CLK */\ - MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE */\ - MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /* GPMC_nOE */\ - MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /* GPMC_nWE */\ - MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE */\ - MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /* GPMC_nBE1 */\ - MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /* GPMC_nWP */\ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /* GPMC_WAIT0 */\ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | DIS | M4)) /* GPIO_64-ETH_NRST */\ - MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /* MMC1_CLK */\ - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /* MMC1_CMD */\ - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /* MMC1_DAT0 */\ - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /* MMC1_DAT1 */\ - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /* MMC1_DAT2 */\ - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /* MMC1_DAT3 */\ - MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /* UART3_TX */\ - MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /* UART3_RX */\ - MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /* I2C1_SCL */\ - MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /* I2C1_SDA */\ - MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /* I2C4_SCL */\ - MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /* I2C4_SDA */\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /* SYS_32K */\ - MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /* GPIO_2 */\ - MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /* GPIO_3 */\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */\ - MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /* GPIO_5 */\ - MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /* GPIO_6 */\ - MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7 */\ - MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /* GPIO_8 */\ - MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /* SDRC_CKE0 */\ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /* SDRC_CKE1 */ -#endif diff --git a/board/isee/igep0030/Makefile b/board/isee/igep0030/Makefile deleted file mode 100644 index cbc03d4..0000000 --- a/board/isee/igep0030/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := igep0030.o - -SRCS := $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/isee/igep0030/igep0030.c b/board/isee/igep0030/igep0030.c deleted file mode 100644 index 107cb7f..0000000 --- a/board/isee/igep0030/igep0030.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * (C) Copyright 2010 - * ISEE 2007 SL, <www.iseebcn.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <twl4030.h> -#include <asm/io.h> -#include <asm/arch/mem.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/mach-types.h> -#include "igep0030.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - - return 0; -} - -#ifdef CONFIG_SPL_BUILD -/* - * Routine: omap_rev_string - * Description: For SPL builds output board rev - */ -void omap_rev_string(void) -{ -} - -/* - * Routine: get_board_mem_timings - * Description: If we use SPL then there is no x-loader nor config header - * so we have to setup the DDR timings ourself on both banks. - */ -void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, - u32 *mr) -{ - *mr = MICRON_V_MR_165; -#ifdef CONFIG_BOOT_NAND - *mcfg = MICRON_V_MCFG_200(256 << 20); - *ctrla = MICRON_V_ACTIMA_200; - *ctrlb = MICRON_V_ACTIMB_200; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; -#else - if (get_cpu_family() == CPU_OMAP34XX) { - *mcfg = NUMONYX_V_MCFG_165(256 << 20); - *ctrla = NUMONYX_V_ACTIMA_165; - *ctrlb = NUMONYX_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - - } else { - *mcfg = NUMONYX_V_MCFG_200(256 << 20); - *ctrla = NUMONYX_V_ACTIMA_200; - *ctrlb = NUMONYX_V_ACTIMB_200; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; - } -#endif -} -#endif - -#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) -int board_mmc_init(bd_t *bis) -{ - omap_mmc_init(0, 0, 0); - return 0; -} -#endif - -/* - * Routine: misc_init_r - * Description: Configure board specific parts - */ -int misc_init_r(void) -{ - twl4030_power_init(); - - dieid_num_r(); - - return 0; -} - -/* - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers specific to the - * hardware. Many pins need to be moved from protect to primary - * mode. - */ -void set_muxconf_regs(void) -{ - MUX_DEFAULT(); -} diff --git a/board/isee/igep0030/igep0030.h b/board/isee/igep0030/igep0030.h deleted file mode 100644 index a93339d..0000000 --- a/board/isee/igep0030/igep0030.h +++ /dev/null @@ -1,151 +0,0 @@ -/* - * (C) Copyright 2010 - * ISEE 2007 SL, <www.iseebcn.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _IGEP0030_H_ -#define _IGEP0030_H_ - -const omap3_sysinfo sysinfo = { - DDR_STACKED, - "OMAP3 IGEP module", -#if defined(CONFIG_ENV_IS_IN_ONENAND) - "ONENAND", -#else - "NAND", -#endif -}; - -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ - -#define MUX_DEFAULT()\ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /* SDRC_D0 */\ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /* SDRC_D1 */\ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /* SDRC_D2 */\ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /* SDRC_D3 */\ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /* SDRC_D4 */\ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /* SDRC_D5 */\ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /* SDRC_D6 */\ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /* SDRC_D7 */\ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /* SDRC_D8 */\ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /* SDRC_D9 */\ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /* SDRC_D10 */\ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /* SDRC_D11 */\ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /* SDRC_D12 */\ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /* SDRC_D13 */\ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /* SDRC_D14 */\ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /* SDRC_D15 */\ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /* SDRC_D16 */\ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /* SDRC_D17 */\ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /* SDRC_D18 */\ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /* SDRC_D19 */\ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /* SDRC_D20 */\ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /* SDRC_D21 */\ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /* SDRC_D22 */\ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /* SDRC_D23 */\ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /* SDRC_D24 */\ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /* SDRC_D25 */\ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /* SDRC_D26 */\ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /* SDRC_D27 */\ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /* SDRC_D28 */\ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /* SDRC_D29 */\ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /* SDRC_D30 */\ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /* SDRC_D31 */\ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /* SDRC_CLK */\ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /* SDRC_DQS0 */\ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /* SDRC_DQS1 */\ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /* SDRC_DQS2 */\ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /* SDRC_DQS3 */\ - MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /* GPMC_A1 */\ - MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /* GPMC_A2 */\ - MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /* GPMC_A3 */\ - MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /* GPMC_A4 */\ - MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /* GPMC_A5 */\ - MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /* GPMC_A6 */\ - MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /* GPMC_A7 */\ - MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /* GPMC_A8 */\ - MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /* GPMC_A9 */\ - MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /* GPMC_A10 */\ - MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /* GPMC_D0 */\ - MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /* GPMC_D1 */\ - MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /* GPMC_D2 */\ - MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /* GPMC_D3 */\ - MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /* GPMC_D4 */\ - MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /* GPMC_D5 */\ - MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /* GPMC_D6 */\ - MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /* GPMC_D7 */\ - MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /* GPMC_D8 */\ - MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /* GPMC_D9 */\ - MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /* GPMC_D10 */\ - MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /* GPMC_D11 */\ - MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /* GPMC_D12 */\ - MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /* GPMC_D13 */\ - MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /* GPMC_D14 */\ - MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /* GPMC_D15 */\ - MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /* GPMC_nCS0 */\ - MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /* GPMC_nCS1 */\ - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /* GPIO_nCS2 */\ - MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /* GPIO_nCS3 */\ - MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /* GPMC_nCS4 */\ - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /* GPMC_nCS5 */\ - MUX_VAL(CP(GPMC_NCS6), (IDIS | PTU | EN | M0)) /* GPMC_nCS6 */\ - MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | EN | M0)) /* GPMC_nCS7 */\ - MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /* GPMC_CLK */\ - MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE*/\ - MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /* GPMC_nOE */\ - MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /* GPMC_nWE */\ - MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE*/\ - MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /* GPMC_nBE1 */\ - MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /* GPMC_nWP */\ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /* GPMC_WAIT0 */\ - MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /* MMC1_CLK */\ - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /* MMC1_CMD */\ - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /* MMC1_DAT0 */\ - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /* MMC1_DAT1 */\ - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /* MMC1_DAT2 */\ - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /* MMC1_DAT3 */\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /* UART1_TX */\ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /* UART1_RX */\ - MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /* UART3_TX */\ - MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /* UART3_RX */\ - MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /* I2C1_SCL */\ - MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /* I2C1_SDA */\ - MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /* I2C4_SCL */\ - MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /* I2C4_SDA */\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /* SYS_32K */\ - MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /* GPIO_2 */\ - MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /* GPIO_3 */\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */\ - MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /* GPIO_5 */\ - MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /* GPIO_6 */\ - MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7 */\ - MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /* GPIO_8 */\ - MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /* SDRC_CKE0 */\ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /* SDRC_CKE1 */ -#endif diff --git a/board/isee/igep00x0/Makefile b/board/isee/igep00x0/Makefile new file mode 100644 index 0000000..f595954 --- /dev/null +++ b/board/isee/igep00x0/Makefile @@ -0,0 +1,43 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := igep00x0.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c new file mode 100644 index 0000000..c8b2fbf --- /dev/null +++ b/board/isee/igep00x0/igep00x0.c @@ -0,0 +1,186 @@ +/* + * (C) Copyright 2010 + * ISEE 2007 SL, <www.iseebcn.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <twl4030.h> +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#include <netdev.h> +#include <asm/gpio.h> +#include <asm/arch/omap_gpmc.h> +#endif +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> +#include "igep00x0.h" + +DECLARE_GLOBAL_DATA_PTR; + +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) && defined(CONFIG_CMD_NET) +/* GPMC definitions for LAN9221 chips */ +static const u32 gpmc_lan_config[] = { + NET_LAN9221_GPMC_CONFIG1, + NET_LAN9221_GPMC_CONFIG2, + NET_LAN9221_GPMC_CONFIG3, + NET_LAN9221_GPMC_CONFIG4, + NET_LAN9221_GPMC_CONFIG5, + NET_LAN9221_GPMC_CONFIG6, +}; +#endif + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +#ifdef CONFIG_SPL_BUILD +/* + * Routine: omap_rev_string + * Description: For SPL builds output board rev + */ +void omap_rev_string(void) +{ +} + +/* + * Routine: get_board_mem_timings + * Description: If we use SPL then there is no x-loader nor config header + * so we have to setup the DDR timings ourself on both banks. + */ +void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, + u32 *mr) +{ + *mr = MICRON_V_MR_165; +#ifdef CONFIG_BOOT_NAND + *mcfg = MICRON_V_MCFG_200(256 << 20); + *ctrla = MICRON_V_ACTIMA_200; + *ctrlb = MICRON_V_ACTIMB_200; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; +#else + if (get_cpu_family() == CPU_OMAP34XX) { + *mcfg = NUMONYX_V_MCFG_165(256 << 20); + *ctrla = NUMONYX_V_ACTIMA_165; + *ctrlb = NUMONYX_V_ACTIMB_165; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + + } else { + *mcfg = NUMONYX_V_MCFG_200(256 << 20); + *ctrla = NUMONYX_V_ACTIMA_200; + *ctrlb = NUMONYX_V_ACTIMB_200; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; + } +#endif +} +#endif + +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) && defined(CONFIG_CMD_NET) +/* + * Routine: setup_net_chip + * Description: Setting up the configuration GPMC registers specific to the + * Ethernet hardware. + */ +static void setup_net_chip(void) +{ + struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; + + enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000, + GPMC_SIZE_16M); + + /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ + writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); + /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); + /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, + &ctrl_base->gpmc_nadv_ale); + + /* Make GPIO 64 as output pin and send a magic pulse through it */ + if (!gpio_request(64, "")) { + gpio_direction_output(64, 0); + gpio_set_value(64, 1); + udelay(1); + gpio_set_value(64, 0); + udelay(1); + gpio_set_value(64, 1); + } +} +#endif + +#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0, 0, 0); + return 0; +} +#endif + +/* + * Routine: misc_init_r + * Description: Configure board specific parts + */ +int misc_init_r(void) +{ + twl4030_power_init(); + +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) && defined(CONFIG_CMD_NET) + MUX_IGEP0020(); + setup_net_chip(); +#endif + +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) + MUX_IGEP0030(); +#endif + + dieid_num_r(); + + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + MUX_DEFAULT(); +} + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC911X + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif + return rc; +} diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h new file mode 100644 index 0000000..83822d2 --- /dev/null +++ b/board/isee/igep00x0/igep00x0.h @@ -0,0 +1,165 @@ +/* + * (C) Copyright 2010 + * ISEE 2007 SL, <www.iseebcn.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _IGEP00X0_H_ +#define _IGEP00X0_H_ + +const omap3_sysinfo sysinfo = { + DDR_STACKED, +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) + "OMAP3 IGEP v2 board", +#endif +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) + "OMAP3 IGEP COM Module", +#endif +#if defined(CONFIG_ENV_IS_IN_ONENAND) + "ONENAND", +#else + "NAND", +#endif +}; + +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) && defined(CONFIG_CMD_NET) +static void setup_net_chip(void); +#endif + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DEFAULT()\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /* SDRC_D0 */\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /* SDRC_D1 */\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /* SDRC_D2 */\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /* SDRC_D3 */\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /* SDRC_D4 */\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /* SDRC_D5 */\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /* SDRC_D6 */\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /* SDRC_D7 */\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /* SDRC_D8 */\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /* SDRC_D9 */\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /* SDRC_D10 */\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /* SDRC_D11 */\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /* SDRC_D12 */\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /* SDRC_D13 */\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /* SDRC_D14 */\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /* SDRC_D15 */\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /* SDRC_D16 */\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /* SDRC_D17 */\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /* SDRC_D18 */\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /* SDRC_D19 */\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /* SDRC_D20 */\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /* SDRC_D21 */\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /* SDRC_D22 */\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /* SDRC_D23 */\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /* SDRC_D24 */\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /* SDRC_D25 */\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /* SDRC_D26 */\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /* SDRC_D27 */\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /* SDRC_D28 */\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /* SDRC_D29 */\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /* SDRC_D30 */\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /* SDRC_D31 */\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /* SDRC_CLK */\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /* SDRC_DQS0 */\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /* SDRC_DQS1 */\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /* SDRC_DQS2 */\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /* SDRC_DQS3 */\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /* GPMC_A1 */\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /* GPMC_A2 */\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /* GPMC_A3 */\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /* GPMC_A4 */\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /* GPMC_A5 */\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /* GPMC_A6 */\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /* GPMC_A7 */\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /* GPMC_A8 */\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /* GPMC_A9 */\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /* GPMC_A10 */\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /* GPMC_D0 */\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /* GPMC_D1 */\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /* GPMC_D2 */\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /* GPMC_D3 */\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /* GPMC_D4 */\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /* GPMC_D5 */\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /* GPMC_D6 */\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /* GPMC_D7 */\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /* GPMC_D8 */\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /* GPMC_D9 */\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /* GPMC_D10 */\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /* GPMC_D11 */\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /* GPMC_D12 */\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /* GPMC_D13 */\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /* GPMC_D14 */\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /* GPMC_D15 */\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /* GPMC_nCS0 */\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /* GPMC_nCS1 */\ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /* GPIO_nCS2 */\ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /* GPIO_nCS3 */\ + MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /* GPMC_nCS4 */\ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /* GPMC_nCS5 */\ + MUX_VAL(CP(GPMC_NCS6), (IDIS | PTU | EN | M0)) /* GPMC_nCS6 */\ + MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | EN | M0)) /* GPMC_nCS7 */\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /* GPMC_CLK */\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE */\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /* GPMC_nOE */\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /* GPMC_nWE */\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE */\ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /* GPMC_nBE1 */\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /* GPMC_nWP */\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /* GPMC_WAIT0 */\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /* MMC1_CLK */\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /* MMC1_CMD */\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /* MMC1_DAT0 */\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /* MMC1_DAT1 */\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /* MMC1_DAT2 */\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /* MMC1_DAT3 */\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /* UART3_TX */\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /* UART3_RX */\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /* I2C1_SCL */\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /* I2C1_SDA */\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /* I2C4_SCL */\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /* I2C4_SDA */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /* SYS_32K */\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /* GPIO_2 */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /* GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /* GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /* GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /* GPIO_8 */\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /* SDRC_CKE0 */\ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /* SDRC_CKE1 */ +#endif + +#define MUX_IGEP0020() \ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | DIS | M4)) /* GPIO_64-ETH_NRST */\ + +#define MUX_IGEP0030() \ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /* UART1_TX */\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /* UART1_RX */\ + diff --git a/boards.cfg b/boards.cfg index 91504c0..35fbc85 100644 --- a/boards.cfg +++ b/boards.cfg @@ -253,10 +253,10 @@ cm_t35 arm armv7 cm_t35 - omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 dig297 arm armv7 dig297 comelit omap3 -igep0020 arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND -igep0020_nand arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND -igep0030 arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND -igep0030_nand arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND +igep0020 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND +igep0020_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND +igep0030 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND +igep0030_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND am3517_evm arm armv7 am3517evm logicpd omap3 mt_ventoux arm armv7 mt_ventoux teejet omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3
This patch adds an GPIO LED boot status for IGEP boards.
The GPIO LED used is the red LED0 while the Linux kernel uses the green LED0 as the boot status.
By using different GPIO LEDs, the user can know in which step of the boot process the board currently is.
Signed-off-by: Javier Martinez Canillas javier.martinez@collabora.co.uk ---
Changes since v3: - Avoid code duplication but having a single show_boot_progress() function as suggested by Wolfgang Denk.
Changes since v2: - Use show_boot_progress() instead implementing yet another boot status signalling as suggested by Wolfgang Denk.
Changes since v1: - Don't set gd->bd->bi_arch_number since is done in arch/arm/lib/board.c - Use CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020 instead of check bi_arch_number as suggested by Igor Grinberg.
board/isee/igep00x0/igep00x0.c | 15 +++++++++++++++ board/isee/igep00x0/igep00x0.h | 8 ++++++++ include/configs/igep00x0.h | 3 +++ 3 files changed, 26 insertions(+), 0 deletions(-)
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index c8b2fbf..c432129 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -62,6 +62,21 @@ int board_init(void) return 0; }
+#if defined(CONFIG_SHOW_BOOT_PROGRESS) && !defined(CONFIG_SPL_BUILD) +void show_boot_progress(int val) +{ + if (val < 0) { + /* something went wrong */ + return; + } + + if (!gpio_request(IGEP00X0_GPIO_LED, "")) { + gpio_direction_output(IGEP00X0_GPIO_LED, 0); + gpio_set_value(IGEP00X0_GPIO_LED, 1); + } +} +#endif + #ifdef CONFIG_SPL_BUILD /* * Routine: omap_rev_string diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h index 83822d2..4b81960 100644 --- a/board/isee/igep00x0/igep00x0.h +++ b/board/isee/igep00x0/igep00x0.h @@ -23,6 +23,14 @@ #ifndef _IGEP00X0_H_ #define _IGEP00X0_H_
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#define IGEP00X0_GPIO_LED 27 +#endif + +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) +#define IGEP00X0_GPIO_LED 16 +#endif + const omap3_sysinfo sysinfo = { DDR_STACKED, #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index be7937d..07b1d3a 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -82,6 +82,9 @@ #define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1
+/* define to enable boot progress via leds */ +#define CONFIG_SHOW_BOOT_PROGRESS + /* USB */ #define CONFIG_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1
On 12/26/12 05:24, Javier Martinez Canillas wrote:
This patch adds an GPIO LED boot status for IGEP boards.
The GPIO LED used is the red LED0 while the Linux kernel uses the green LED0 as the boot status.
By using different GPIO LEDs, the user can know in which step of the boot process the board currently is.
Signed-off-by: Javier Martinez Canillas javier.martinez@collabora.co.uk
Changes since v3: - Avoid code duplication but having a single show_boot_progress() function as suggested by Wolfgang Denk.
Changes since v2: - Use show_boot_progress() instead implementing yet another boot status signalling as suggested by Wolfgang Denk.
Changes since v1: - Don't set gd->bd->bi_arch_number since is done in arch/arm/lib/board.c - Use CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020 instead of check bi_arch_number as suggested by Igor Grinberg.
board/isee/igep00x0/igep00x0.c | 15 +++++++++++++++ board/isee/igep00x0/igep00x0.h | 8 ++++++++ include/configs/igep00x0.h | 3 +++ 3 files changed, 26 insertions(+), 0 deletions(-)
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index c8b2fbf..c432129 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -62,6 +62,21 @@ int board_init(void) return 0; }
+#if defined(CONFIG_SHOW_BOOT_PROGRESS) && !defined(CONFIG_SPL_BUILD) +void show_boot_progress(int val) +{
- if (val < 0) {
/* something went wrong */return;- }
- if (!gpio_request(IGEP00X0_GPIO_LED, "")) {
gpio_direction_output(IGEP00X0_GPIO_LED, 0);gpio_set_value(IGEP00X0_GPIO_LED, 1);
gpio_direction_output() also sets the value. Why do you need to call gpio_set_value() afterwards? Also, you don't have any delay in between, so it does not look like a "blink"...
- }
+} +#endif
#ifdef CONFIG_SPL_BUILD /*
- Routine: omap_rev_string
diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h index 83822d2..4b81960 100644 --- a/board/isee/igep00x0/igep00x0.h +++ b/board/isee/igep00x0/igep00x0.h @@ -23,6 +23,14 @@ #ifndef _IGEP00X0_H_ #define _IGEP00X0_H_
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#define IGEP00X0_GPIO_LED 27 +#endif
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) +#define IGEP00X0_GPIO_LED 16 +#endif
const omap3_sysinfo sysinfo = { DDR_STACKED, #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index be7937d..07b1d3a 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -82,6 +82,9 @@ #define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1
+/* define to enable boot progress via leds */ +#define CONFIG_SHOW_BOOT_PROGRESS
/* USB */ #define CONFIG_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1
On 12/27/2012 02:16 PM, Igor Grinberg wrote:> On 12/26/12 05:24, Javier Martinez Canillas wrote:
This patch adds an GPIO LED boot status for IGEP boards.
The GPIO LED used is the red LED0 while the Linux kernel uses the green LED0 as the boot status.
By using different GPIO LEDs, the user can know in which step of the boot process the board currently is.
Signed-off-by: Javier Martinez Canillas javier.martinez@collabora.co.uk
Changes since v3: - Avoid code duplication but having a single show_boot_progress() function as suggested by Wolfgang Denk.
Changes since v2: - Use show_boot_progress() instead implementing yet another boot status signalling as suggested by Wolfgang Denk.
Changes since v1: - Don't set gd->bd->bi_arch_number since is done in arch/arm/lib/board.c - Use CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020 instead of check bi_arch_number as suggested by Igor Grinberg.
board/isee/igep00x0/igep00x0.c | 15 +++++++++++++++ board/isee/igep00x0/igep00x0.h | 8 ++++++++ include/configs/igep00x0.h | 3 +++ 3 files changed, 26 insertions(+), 0 deletions(-)
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index c8b2fbf..c432129 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -62,6 +62,21 @@ int board_init(void) return 0; }
+#if defined(CONFIG_SHOW_BOOT_PROGRESS) && !defined(CONFIG_SPL_BUILD) +void show_boot_progress(int val) +{
- if (val < 0) {
/* something went wrong */return;- }
- if (!gpio_request(IGEP00X0_GPIO_LED, "")) {
gpio_direction_output(IGEP00X0_GPIO_LED, 0);gpio_set_value(IGEP00X0_GPIO_LED, 1);gpio_direction_output() also sets the value. Why do you need to call gpio_set_value() afterwards? Also, you don't have any delay in between, so it does not look like a "blink"...
Hi Igor,
Yes, it's not meant to blink, but keep the led on I just didn't know that it also sets the value.
Will send a new version with gpio_direction_output(IGEP00X0_GPIO_LED, 1) and remove gpio_set_value().
- }
+} +#endif
#ifdef CONFIG_SPL_BUILD /*
- Routine: omap_rev_string
diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h index 83822d2..4b81960 100644 --- a/board/isee/igep00x0/igep00x0.h +++ b/board/isee/igep00x0/igep00x0.h @@ -23,6 +23,14 @@ #ifndef _IGEP00X0_H_ #define _IGEP00X0_H_
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#define IGEP00X0_GPIO_LED 27 +#endif
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) +#define IGEP00X0_GPIO_LED 16 +#endif
const omap3_sysinfo sysinfo = { DDR_STACKED, #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index be7937d..07b1d3a 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -82,6 +82,9 @@ #define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1
+/* define to enable boot progress via leds */ +#define CONFIG_SHOW_BOOT_PROGRESS
/* USB */ #define CONFIG_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1
Thanks a lot and best regards, Javier
Hi Javier,
On 12/26/12 05:24, Javier Martinez Canillas wrote:
Even when the IGEPv2 board and the IGEP Computer-on-Module are different from a form factor point of view, they are very similar in the fact that share many components and how they are wired.
So, it is possible (and better) to have a single board file for both devices and just use the CONFIG_MACH_TYPE to make a differentiation between both boards when needed.
I'm wondering... isn't there a way to distinguish between the boards in runtime? Because if there is, you could even use the same binary. This is what we do on cm-t3530/cm-t3730 and is very maintainable, avoids code duplication, and avoids multiple ifdeffery.
This change avoids duplication by removing 298 lines of code and makes future maintenance easier.
Signed-off-by: Javier Martinez Canillas javier.martinez@collabora.co.uk
board/isee/igep0020/Makefile | 43 --------- board/isee/igep0020/igep0020.c | 177 -------------------------------------- board/isee/igep0020/igep0020.h | 151 -------------------------------- board/isee/igep0030/Makefile | 43 --------- board/isee/igep0030/igep0030.c | 118 ------------------------- board/isee/igep0030/igep0030.h | 151 -------------------------------- board/isee/igep00x0/Makefile | 43 +++++++++ board/isee/igep00x0/igep00x0.c | 186 ++++++++++++++++++++++++++++++++++++++++ board/isee/igep00x0/igep00x0.h | 165 +++++++++++++++++++++++++++++++++++ boards.cfg | 8 +- 10 files changed, 398 insertions(+), 687 deletions(-) delete mode 100644 board/isee/igep0020/Makefile delete mode 100644 board/isee/igep0020/igep0020.c delete mode 100644 board/isee/igep0020/igep0020.h delete mode 100644 board/isee/igep0030/Makefile delete mode 100644 board/isee/igep0030/igep0030.c delete mode 100644 board/isee/igep0030/igep0030.h create mode 100644 board/isee/igep00x0/Makefile create mode 100644 board/isee/igep00x0/igep00x0.c create mode 100644 board/isee/igep00x0/igep00x0.h
[...]
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c new file mode 100644 index 0000000..c8b2fbf --- /dev/null +++ b/board/isee/igep00x0/igep00x0.c
[...]
+#include <common.h> +#include <twl4030.h> +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#include <netdev.h> +#include <asm/gpio.h> +#include <asm/arch/omap_gpmc.h> +#endif
Is there a problem including three above files for igep0030? If not, then it will be better to remove the if.
+#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> +#include "igep00x0.h"
+DECLARE_GLOBAL_DATA_PTR;
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) && defined(CONFIG_CMD_NET)
Does the igep0030 uses CONFIG_CMD_NET? If it does not, then you can just disable CONFIG_CMD_NET for igep0030 and here (and other net related places) just use #ifdef CONFIG_CMD_NET
+/* GPMC definitions for LAN9221 chips */ +static const u32 gpmc_lan_config[] = {
- NET_LAN9221_GPMC_CONFIG1,
- NET_LAN9221_GPMC_CONFIG2,
- NET_LAN9221_GPMC_CONFIG3,
- NET_LAN9221_GPMC_CONFIG4,
- NET_LAN9221_GPMC_CONFIG5,
- NET_LAN9221_GPMC_CONFIG6,
+}; +#endif
[...]
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) && defined(CONFIG_CMD_NET) +/*
- Routine: setup_net_chip
- Description: Setting up the configuration GPMC registers specific to the
Ethernet hardware.- */
+static void setup_net_chip(void) +{
- struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
- enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
GPMC_SIZE_16M);- /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
- writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
- /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
- writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
- /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
- writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
&ctrl_base->gpmc_nadv_ale);- /* Make GPIO 64 as output pin and send a magic pulse through it */
- if (!gpio_request(64, "")) {
gpio_direction_output(64, 0);gpio_set_value(64, 1);udelay(1);gpio_set_value(64, 0);udelay(1);gpio_set_value(64, 1);- }
+}
having here:
#else static inline void setup_net_chip(void) {}
or equivalent will remove the need to place the call inside the ifdef below.
+#endif
[...]
+/*
- Routine: misc_init_r
- Description: Configure board specific parts
- */
+int misc_init_r(void) +{
- twl4030_power_init();
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) && defined(CONFIG_CMD_NET)
- MUX_IGEP0020();
- setup_net_chip();
+#endif
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
- MUX_IGEP0030();
+#endif
Why do you need to setup the board specific muxes in misc_init_r()? Why not do this in set_muxconf_regs() along with the common muxes.
- dieid_num_r();
- return 0;
+}
+/*
- Routine: set_muxconf_regs
- Description: Setting up the configuration Mux registers specific to the
hardware. Many pins need to be moved from protect to primary
mode.- */
+void set_muxconf_regs(void) +{
- MUX_DEFAULT();
+}
[...]
diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h new file mode 100644 index 0000000..83822d2 --- /dev/null +++ b/board/isee/igep00x0/igep00x0.h
[...]
+const omap3_sysinfo sysinfo = {
- DDR_STACKED,
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
- "OMAP3 IGEP v2 board",
+#endif +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
- "OMAP3 IGEP COM Module",
+#endif +#if defined(CONFIG_ENV_IS_IN_ONENAND)
- "ONENAND",
+#else
- "NAND",
+#endif +};
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) && defined(CONFIG_CMD_NET) +static void setup_net_chip(void); +#endif
Why do you need this declaration?
+/*
- IEN - Input Enable
- IDIS - Input Disable
- PTD - Pull type Down
- PTU - Pull type Up
- DIS - Pull type selection is inactive
- EN - Pull type selection is active
- M0 - Mode 0
- The commented string gives the final mux configuration for that pin
- */
+#define MUX_DEFAULT()\
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /* SDRC_D0 */\
[...]
- MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /* SDRC_CKE1 */
+#endif
+#define MUX_IGEP0020() \
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | DIS | M4)) /* GPIO_64-ETH_NRST */\
+#define MUX_IGEP0030() \
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /* UART1_TX */\
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /* UART1_RX */\
diff --git a/boards.cfg b/boards.cfg index 91504c0..35fbc85 100644 --- a/boards.cfg +++ b/boards.cfg @@ -253,10 +253,10 @@ cm_t35 arm armv7 cm_t35 - omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 dig297 arm armv7 dig297 comelit omap3 -igep0020 arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND -igep0020_nand arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND -igep0030 arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND -igep0030_nand arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND +igep0020 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND +igep0020_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND +igep0030 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND +igep0030_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND am3517_evm arm armv7 am3517evm logicpd omap3 mt_ventoux arm armv7 mt_ventoux teejet omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3
On Thu, Dec 27, 2012 at 9:07 AM, Igor Grinberg grinberg@compulab.co.il wrote:
Hi Javier,
Hi Igor,
Thanks a lot for your feedback.
On 12/26/12 05:24, Javier Martinez Canillas wrote:
Even when the IGEPv2 board and the IGEP Computer-on-Module are different from a form factor point of view, they are very similar in the fact that share many components and how they are wired.
So, it is possible (and better) to have a single board file for both devices and just use the CONFIG_MACH_TYPE to make a differentiation between both boards when needed.
I'm wondering... isn't there a way to distinguish between the boards in runtime? Because if there is, you could even use the same binary. This is what we do on cm-t3530/cm-t3730 and is very maintainable, avoids code duplication, and avoids multiple ifdeffery.
Sadly there isn't.
It would have been great to have a way to distinguish between the two boards but it seems the IGEP hardware designers decided this was not necessary.
This change avoids duplication by removing 298 lines of code and makes future maintenance easier.
Signed-off-by: Javier Martinez Canillas javier.martinez@collabora.co.uk
board/isee/igep0020/Makefile | 43 --------- board/isee/igep0020/igep0020.c | 177 -------------------------------------- board/isee/igep0020/igep0020.h | 151 -------------------------------- board/isee/igep0030/Makefile | 43 --------- board/isee/igep0030/igep0030.c | 118 ------------------------- board/isee/igep0030/igep0030.h | 151 -------------------------------- board/isee/igep00x0/Makefile | 43 +++++++++ board/isee/igep00x0/igep00x0.c | 186 ++++++++++++++++++++++++++++++++++++++++ board/isee/igep00x0/igep00x0.h | 165 +++++++++++++++++++++++++++++++++++ boards.cfg | 8 +- 10 files changed, 398 insertions(+), 687 deletions(-) delete mode 100644 board/isee/igep0020/Makefile delete mode 100644 board/isee/igep0020/igep0020.c delete mode 100644 board/isee/igep0020/igep0020.h delete mode 100644 board/isee/igep0030/Makefile delete mode 100644 board/isee/igep0030/igep0030.c delete mode 100644 board/isee/igep0030/igep0030.h create mode 100644 board/isee/igep00x0/Makefile create mode 100644 board/isee/igep00x0/igep00x0.c create mode 100644 board/isee/igep00x0/igep00x0.h
[...]
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c new file mode 100644 index 0000000..c8b2fbf --- /dev/null +++ b/board/isee/igep00x0/igep00x0.c
[...]
+#include <common.h> +#include <twl4030.h> +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#include <netdev.h> +#include <asm/gpio.h> +#include <asm/arch/omap_gpmc.h> +#endif
Is there a problem including three above files for igep0030? If not, then it will be better to remove the if.
Ok, will do.
+#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> +#include "igep00x0.h"
+DECLARE_GLOBAL_DATA_PTR;
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) && defined(CONFIG_CMD_NET)
Does the igep0030 uses CONFIG_CMD_NET? If it does not, then you can just disable CONFIG_CMD_NET for igep0030 and here (and other net related places) just use #ifdef CONFIG_CMD_NET
Ok, will simplify this too.
+/* GPMC definitions for LAN9221 chips */ +static const u32 gpmc_lan_config[] = {
NET_LAN9221_GPMC_CONFIG1,NET_LAN9221_GPMC_CONFIG2,NET_LAN9221_GPMC_CONFIG3,NET_LAN9221_GPMC_CONFIG4,NET_LAN9221_GPMC_CONFIG5,NET_LAN9221_GPMC_CONFIG6,+}; +#endif
[...]
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) && defined(CONFIG_CMD_NET) +/*
- Routine: setup_net_chip
- Description: Setting up the configuration GPMC registers specific to the
Ethernet hardware.- */
+static void setup_net_chip(void) +{
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,GPMC_SIZE_16M);/* Enable off mode for NWE in PADCONF_GPMC_NWE register */writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,&ctrl_base->gpmc_nadv_ale);/* Make GPIO 64 as output pin and send a magic pulse through it */if (!gpio_request(64, "")) {gpio_direction_output(64, 0);gpio_set_value(64, 1);udelay(1);gpio_set_value(64, 0);udelay(1);gpio_set_value(64, 1);}+}
having here:
#else static inline void setup_net_chip(void) {}
or equivalent will remove the need to place the call inside the ifdef below.
+#endif
[...]
+/*
- Routine: misc_init_r
- Description: Configure board specific parts
- */
+int misc_init_r(void) +{
twl4030_power_init();+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) && defined(CONFIG_CMD_NET)
MUX_IGEP0020();setup_net_chip();+#endif
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
MUX_IGEP0030();+#endif
Why do you need to setup the board specific muxes in misc_init_r()? Why not do this in set_muxconf_regs() along with the common muxes.
Perfect, will change that.
dieid_num_r();return 0;+}
+/*
- Routine: set_muxconf_regs
- Description: Setting up the configuration Mux registers specific to the
hardware. Many pins need to be moved from protect to primary
mode.- */
+void set_muxconf_regs(void) +{
MUX_DEFAULT();+}
[...]
diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h new file mode 100644 index 0000000..83822d2 --- /dev/null +++ b/board/isee/igep00x0/igep00x0.h
[...]
+const omap3_sysinfo sysinfo = {
DDR_STACKED,+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
"OMAP3 IGEP v2 board",+#endif +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
"OMAP3 IGEP COM Module",+#endif +#if defined(CONFIG_ENV_IS_IN_ONENAND)
"ONENAND",+#else
"NAND",+#endif +};
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) && defined(CONFIG_CMD_NET) +static void setup_net_chip(void); +#endif
Why do you need this declaration?
It was necessary because I didn't include an:
#else static inline void setup_net_chip(void) {}
as you suggested, but with that change it won't be necessary to use ifdeffery anymore.
+/*
- IEN - Input Enable
- IDIS - Input Disable
- PTD - Pull type Down
- PTU - Pull type Up
- DIS - Pull type selection is inactive
- EN - Pull type selection is active
- M0 - Mode 0
- The commented string gives the final mux configuration for that pin
- */
+#define MUX_DEFAULT()\
MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /* SDRC_D0 */\[...]
MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /* SDRC_CKE1 */+#endif
+#define MUX_IGEP0020() \
MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | DIS | M4)) /* GPIO_64-ETH_NRST */\+#define MUX_IGEP0030() \
MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /* UART1_TX */\MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /* UART1_RX */\diff --git a/boards.cfg b/boards.cfg index 91504c0..35fbc85 100644 --- a/boards.cfg +++ b/boards.cfg @@ -253,10 +253,10 @@ cm_t35 arm armv7 cm_t35 - omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 dig297 arm armv7 dig297 comelit omap3 -igep0020 arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND -igep0020_nand arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND -igep0030 arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND -igep0030_nand arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND +igep0020 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND +igep0020_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND +igep0030 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND +igep0030_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND am3517_evm arm armv7 am3517evm logicpd omap3 mt_ventoux arm armv7 mt_ventoux teejet omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3
-- Regards, Igor.
Thanks a lot for your suggestions and best regards, Javier
participants (3)
-
Igor Grinberg -
Javier Martinez Canillas -
Javier Martinez Canillas