This ensures the USB_MUSB_PIO_ONLY config is set to an apppropriate default values from the changes enabling USB_MUSB_GADGET does.

Namely, USB_MUSB_PIO_ONLY default to =y on USB_MUSB_SUNXI being y. Since USB_MUSB_SUNXI is behind the conditional, the option does not exist when using make ..._defconfig, thus the default of USB_MUSB_PIO_ONLY is kept "# ... is not set". This, _is_ counter-intuitively a set value, meaning that the default will not be applied once USB_MUSB_SUNXI is set to y by toggling USB_MUSB_GADGET via menuconfig.

Signed-off-by: Samuel Dionne-Riel samuel@dionne-riel.com

--- Some additional context about the bug.

Using `make ..._defconfig` for a sunxi board, then using `make menuconfig` to change the option `CONFIG_USB_MUSB_GADGET=y` causes builds to fail. When the same option is set to `=y` via the defconfig file, the option work. Follows the failure:

``` CC drivers/usb/musb-new/musb_gadget.o drivers/usb/musb-new/musb_gadget.c: In function 'map_dma_buffer': drivers/usb/musb-new/musb_gadget.c:103:26: warning: implicit declaration of function 'dma_map_single'; did you mean 'malloc_simple'? [-Wimplicit-function-declaration] request->request.dma = dma_map_single( ^~~~~~~~~~~~~~ malloc_simple drivers/usb/musb-new/musb_gadget.c:108:8: error: 'DMA_TO_DEVICE' undeclared (first use in this function); did you mean 'USB_DT_DEVICE'? ? DMA_TO_DEVICE ^~~~~~~~~~~~~ USB_DT_DEVICE drivers/usb/musb-new/musb_gadget.c:108:8: note: each undeclared identifier is reported only once for each function it appears in drivers/usb/musb-new/musb_gadget.c:109:8: error: 'DMA_FROM_DEVICE' undeclared (first use in this function); did you mean 'U_BOOT_DEVICE'? : DMA_FROM_DEVICE); ^~~~~~~~~~~~~~~ U_BOOT_DEVICE drivers/usb/musb-new/musb_gadget.c:112:3: warning: implicit declaration of function 'dma_sync_single_for_device' [-Wimplicit-function-declaration] dma_sync_single_for_device(musb->controller, ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/usb/musb-new/musb_gadget.c: In function 'unmap_dma_buffer': drivers/usb/musb-new/musb_gadget.c:135:3: warning: implicit declaration of function 'dma_unmap_single' [-Wimplicit-function-declaration] dma_unmap_single(musb->controller, ^~~~~~~~~~~~~~~~ drivers/usb/musb-new/musb_gadget.c:139:7: error: 'DMA_TO_DEVICE' undeclared (first use in this function); did you mean 'USB_DT_DEVICE'? ? DMA_TO_DEVICE ^~~~~~~~~~~~~ USB_DT_DEVICE drivers/usb/musb-new/musb_gadget.c:140:7: error: 'DMA_FROM_DEVICE' undeclared (first use in this function); did you mean 'U_BOOT_DEVICE'? : DMA_FROM_DEVICE); ^~~~~~~~~~~~~~~ U_BOOT_DEVICE drivers/usb/musb-new/musb_gadget.c:143:3: warning: implicit declaration of function 'dma_sync_single_for_cpu' [-Wimplicit-function-declaration] dma_sync_single_for_cpu(musb->controller, ^~~~~~~~~~~~~~~~~~~~~~~ make[1]: *** [scripts/Makefile.build:279: drivers/usb/musb-new/musb_gadget.o] Error 1 ```

By diffing the resulting configuration, Othe main difference found is `CONFIG_USB_MUSB_PIO_ONLY` is not set when failing, and set to `=y` when working. This was verified to be the missing option.

As far as I understand it in Kconfig, "is not set" basically marks the option as using a negative "unset" value, and does not mean that it will use the default value. This difference in meaning makes it so that when toggling the option with `make menuconfig`, the option has already been set to "is not set", and it does not change to its default value.

The actual bug may be that there is a regression and the code should work when this value is unset, in this case I do not know how to provide the proper fix.

This fix corrects the issue by gating the option behind `if USB_MUSB_HOST || USB_MUSB_GADGET`. To me, it looks like this was the intention, in the initial patch, but might have been overlooked. I assume so since the option was defined after the `if`, rather than before, like the other options not gated behind the option.

drivers/usb/musb-new/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig index 79ad14ef66..95499f1b17 100644 --- a/drivers/usb/musb-new/Kconfig +++ b/drivers/usb/musb-new/Kconfig @@ -72,11 +72,11 @@ config USB_MUSB_DISABLE_BULK_COMBINE_SPLIT support it yet. Select this option to disable the feature until the driver adds the support.

-endif - config USB_MUSB_PIO_ONLY bool "Disable DMA (always use PIO)" default y if USB_MUSB_AM35X || USB_MUSB_PIC32 || USB_MUSB_OMAP2PLUS || USB_MUSB_DSPS || USB_MUSB_SUNXI help All data is copied between memory and FIFO by the CPU. DMA controllers are ignored. + +endif