Re: [U-Boot] U-Boot Digest, Vol 9, Issue 275
i'm using u-boot -1.3.0 in MPC8313 evaluation board, it having a NAND , NOR Flash , u-boot stored in NOR flash. when i do the saveenv , reset command the u-boot is erased. i'm not able to fix this issue. help me to fix this issue
On my board this was due to CONFIG_SYS_MONITOR_LEN not being big enough.
Peter
Dear Peter Griffin,
In message 1235312940.26727.2.camel@quercus-bis you wrote:
i'm using u-boot -1.3.0 in MPC8313 evaluation board, it having a NAND , NOR Flash , u-boot stored in NOR flash. when i do the saveenv , reset command the u-boot is erased. i'm not able to fix this issue. help me to fix this issue
On my board this was due to CONFIG_SYS_MONITOR_LEN not being big enough.
when replying, please:
* Keep the original poster's subject * Make sure to includ etheread information
In general, you probably want to read http://www.netmeister.org/news/learn2quote.html
Best regards,
Wolfgang Denk
participants (2)
-
Peter Griffin -
Wolfgang Denk