[U-Boot] [PATCH] sunxi: use random parts of SID to set ethaddr

From: Jonathan Liu net147@gmail.com
Similar to the USB NIC found on OMAP5uEVM, PandaBoard and BeagleBoard-XM boards, the sunxi SoCs have a NIC onboard without an embedded MAC address.
Just like the omap used on these boards, the sunxi SoCs do have a unique chip id, in the form of the 128 bit SID register: http://linux-sunxi.org/SID_Register_Guide
So mimick the BeagleBoard-XM board code (commit 548a64d8) and use the chip id to generate a unique fixed MAC address.
We check for the SID not being all 0, since some early A20 batches shipped without having there SID programmed.
Note we use specific parts of the 128 bits, since some parts indicate the SoC family / revision, and thus are fixed. The algorithm for this was taken from the linux-sunxi.org kernels.
Signed-off-by: Jonathan Liu net147@gmail.com [hdegoede@redhat.com: Expanded the commit message with some more info] Signed-off-by: Hans de Goede hdegoede@redhat.com --- board/sunxi/board.c | 28 ++++++++++++++++++++++++++++ include/configs/sunxi-common.h | 2 ++ 2 files changed, 30 insertions(+)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 8607eb3..2179e23 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -19,9 +19,12 @@ #include <axp209.h> #endif #include <asm/arch/clock.h> +#include <asm/arch/cpu.h> #include <asm/arch/dram.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/io.h> +#include <net.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -157,3 +160,28 @@ void sunxi_board_init(void) printf("Failed to set core voltage! Can't set CPU frequency\n"); } #endif + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ + if (!getenv("ethaddr")) { + uint32_t reg_val = readl(SUNXI_SID_BASE); + + if (reg_val) { + uint8_t mac_addr[6]; + + mac_addr[0] = 0x02; /* Non OUI / registered MAC address */ + mac_addr[1] = (reg_val >> 0) & 0xff; + reg_val = readl(SUNXI_SID_BASE + 0x0c); + mac_addr[2] = (reg_val >> 24) & 0xff; + mac_addr[3] = (reg_val >> 16) & 0xff; + mac_addr[4] = (reg_val >> 8) & 0xff; + mac_addr[5] = (reg_val >> 0) & 0xff; + + eth_setenv_enetaddr("ethaddr", mac_addr); + } + } + + return 0; +} +#endif diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 4083388..13e72d5 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -207,6 +207,8 @@ #define CONFIG_ENV_IS_NOWHERE #endif
+#define CONFIG_MISC_INIT_R + #ifndef CONFIG_SPL_BUILD #include <config_distro_defaults.h> #endif

On Sat, 2014-06-14 at 08:59 +0200, Hans de Goede wrote:
From: Jonathan Liu net147@gmail.com
Similar to the USB NIC found on OMAP5uEVM, PandaBoard and BeagleBoard-XM boards, the sunxi SoCs have a NIC onboard without an embedded MAC address.
Just like the omap used on these boards, the sunxi SoCs do have a unique chip id, in the form of the 128 bit SID register: http://linux-sunxi.org/SID_Register_Guide
So mimick the BeagleBoard-XM board code (commit 548a64d8) and use the chip id to generate a unique fixed MAC address.
We check for the SID not being all 0, since some early A20 batches shipped without having there SID programmed.
Note we use specific parts of the 128 bits, since some parts indicate the SoC family / revision, and thus are fixed. The algorithm for this was taken from the linux-sunxi.org kernels.
Signed-off-by: Jonathan Liu net147@gmail.com [hdegoede@redhat.com: Expanded the commit message with some more info] Signed-off-by: Hans de Goede hdegoede@redhat.com
Acked-by: Ian Campbell ijc@hellion.org.uk

On Sat, 14 Jun 2014 10:46:37 +0100 Ian Campbell ijc@hellion.org.uk wrote:
On Sat, 2014-06-14 at 08:59 +0200, Hans de Goede wrote:
From: Jonathan Liu net147@gmail.com
Similar to the USB NIC found on OMAP5uEVM, PandaBoard and BeagleBoard-XM boards, the sunxi SoCs have a NIC onboard without an embedded MAC address.
Just like the omap used on these boards, the sunxi SoCs do have a unique chip id, in the form of the 128 bit SID register: http://linux-sunxi.org/SID_Register_Guide
So mimick the BeagleBoard-XM board code (commit 548a64d8) and use the chip id to generate a unique fixed MAC address.
We check for the SID not being all 0, since some early A20 batches shipped without having there SID programmed.
Note we use specific parts of the 128 bits, since some parts indicate the SoC family / revision, and thus are fixed. The algorithm for this was taken from the linux-sunxi.org kernels.
Signed-off-by: Jonathan Liu net147@gmail.com [hdegoede@redhat.com: Expanded the commit message with some more info] Signed-off-by: Hans de Goede hdegoede@redhat.com
Acked-by: Ian Campbell ijc@hellion.org.uk
Acked-by: Siarhei Siamashka siarhei.siamashka@gmail.com
participants (3)
-
Hans de Goede
-
Ian Campbell
-
Siarhei Siamashka