Hi,

I hope this is not too off-topic here.

I have two of these boards:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=M5272C3

to give away for the cost of shipping - preferrably inside the EU, because I do not want to deal with customs.

I salvaged them from being scrapped some years ago, and never got around to use them. I just tested that the dbug bootloader in flash works & is able to load and start a uCLinux image via net.

The boards have a BDM connector and come with a P&E parallel port BDM wiggler, but without any software, so you will probably need to supply your own BDM debugger for u-boot development.

Please reply by mail if you want one.

cu Michael