[PATCH] Revert "dm: core: device: switch off power domain after device removal"
This commit breaks Linux boot on Amlogic libretech-cc, libretech-ac, sei510, sei610 board by automatically disabling the power domain after device removal. This because the power domain associated to the video driver must be kept enabled for linux to boot.
The only way is to use the introduced flag DM_FLAG_DEFAULT_PD_CTRL_OFF, which removes automatic handling of power domain. This flag is not a complete solution since it will force reverting to manually enable the power domain from the driver probe.
Instead a flag to keep the power domain enabled after removal should be introduced.
In the meantime revert this commit until a proper solution is found.
This reverts commit 52edfed65de967a86983a55c51ba0727090efc43.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- Hi Simon, Tom,
This revert is the simplest fix to make the boards boot again on v2020.04, the goal is to make this behavior happen again with a proper flag to keep the power domain enabled on specific drivers.
I can push it on my next PR on my branch, is it ok ?
Neil
drivers/core/device-remove.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/drivers/core/device-remove.c b/drivers/core/device-remove.c index 444e34b492..5540053d3c 100644 --- a/drivers/core/device-remove.c +++ b/drivers/core/device-remove.c @@ -16,7 +16,6 @@ #include <dm/uclass.h> #include <dm/uclass-internal.h> #include <dm/util.h> -#include <power-domain.h>
int device_chld_unbind(struct udevice *dev, struct driver *drv) { @@ -194,10 +193,6 @@ int device_remove(struct udevice *dev, uint flags) } }
- if (!(drv->flags & DM_FLAG_DEFAULT_PD_CTRL_OFF) && - (dev != gd->cur_serial_dev)) - dev_power_domain_off(dev); - if (flags_remove(flags, drv->flags)) { device_free(dev);
On Mon, 17 Feb 2020 10:10:36 +0100 Neil Armstrong narmstrong@baylibre.com wrote:
This commit breaks Linux boot on Amlogic libretech-cc, libretech-ac, sei510, sei610 board by automatically disabling the power domain after device removal. This because the power domain associated to the video driver must be kept enabled for linux to boot.
The only way is to use the introduced flag DM_FLAG_DEFAULT_PD_CTRL_OFF, which removes automatic handling of power domain. This flag is not a complete solution since it will force reverting to manually enable the power domain from the driver probe.
Instead a flag to keep the power domain enabled after removal should be introduced.
In the meantime revert this commit until a proper solution is found.
This reverts commit 52edfed65de967a86983a55c51ba0727090efc43.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com
Hi Simon, Tom,
This revert is the simplest fix to make the boards boot again on v2020.04, the goal is to make this behavior happen again with a proper flag to keep the power domain enabled on specific drivers.
I can push it on my next PR on my branch, is it ok ?
Please test if these two patches fix the problem: http://patchwork.ozlabs.org/patch/1239143 http://patchwork.ozlabs.org/patch/1239144
-- Anatolij
Hi Anatolij,
On 17/02/2020 12:53, Anatolij Gustschin wrote:
On Mon, 17 Feb 2020 10:10:36 +0100 Neil Armstrong narmstrong@baylibre.com wrote:
This commit breaks Linux boot on Amlogic libretech-cc, libretech-ac, sei510, sei610 board by automatically disabling the power domain after device removal. This because the power domain associated to the video driver must be kept enabled for linux to boot.
The only way is to use the introduced flag DM_FLAG_DEFAULT_PD_CTRL_OFF, which removes automatic handling of power domain. This flag is not a complete solution since it will force reverting to manually enable the power domain from the driver probe.
Instead a flag to keep the power domain enabled after removal should be introduced.
In the meantime revert this commit until a proper solution is found.
This reverts commit 52edfed65de967a86983a55c51ba0727090efc43.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com
Hi Simon, Tom,
This revert is the simplest fix to make the boards boot again on v2020.04, the goal is to make this behavior happen again with a proper flag to keep the power domain enabled on specific drivers.
I can push it on my next PR on my branch, is it ok ?
Thanks for pushing these, they should do the trick.
Let me test them and ack them.
Neil
Please test if these two patches fix the problem: http://patchwork.ozlabs.org/patch/1239143 http://patchwork.ozlabs.org/patch/1239144
-- Anatolij
Hi Analolij,
On 17/02/2020 12:53, Anatolij Gustschin wrote:
On Mon, 17 Feb 2020 10:10:36 +0100 Neil Armstrong narmstrong@baylibre.com wrote:
This commit breaks Linux boot on Amlogic libretech-cc, libretech-ac, sei510, sei610 board by automatically disabling the power domain after device removal. This because the power domain associated to the video driver must be kept enabled for linux to boot.
The only way is to use the introduced flag DM_FLAG_DEFAULT_PD_CTRL_OFF, which removes automatic handling of power domain. This flag is not a complete solution since it will force reverting to manually enable the power domain from the driver probe.
Instead a flag to keep the power domain enabled after removal should be introduced.
In the meantime revert this commit until a proper solution is found.
This reverts commit 52edfed65de967a86983a55c51ba0727090efc43.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com
Hi Simon, Tom,
This revert is the simplest fix to make the boards boot again on v2020.04, the goal is to make this behavior happen again with a proper flag to keep the power domain enabled on specific drivers.
I can push it on my next PR on my branch, is it ok ?
Please test if these two patches fix the problem: http://patchwork.ozlabs.org/patch/1239143 http://patchwork.ozlabs.org/patch/1239144
Should I apply these through my tree or you plan to push these yourself ?
Thanks, Neil
-- Anatolij
Hi Neil,
On Mon, 2 Mar 2020 10:30:31 +0100 Neil Armstrong narmstrong@baylibre.com wrote:
Hi Analolij,
On 17/02/2020 12:53, Anatolij Gustschin wrote:
On Mon, 17 Feb 2020 10:10:36 +0100 Neil Armstrong narmstrong@baylibre.com wrote:
This commit breaks Linux boot on Amlogic libretech-cc, libretech-ac, sei510, sei610 board by automatically disabling the power domain after device removal. This because the power domain associated to the video driver must be kept enabled for linux to boot.
The only way is to use the introduced flag DM_FLAG_DEFAULT_PD_CTRL_OFF, which removes automatic handling of power domain. This flag is not a complete solution since it will force reverting to manually enable the power domain from the driver probe.
Instead a flag to keep the power domain enabled after removal should be introduced.
In the meantime revert this commit until a proper solution is found.
This reverts commit 52edfed65de967a86983a55c51ba0727090efc43.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com
Hi Simon, Tom,
This revert is the simplest fix to make the boards boot again on v2020.04, the goal is to make this behavior happen again with a proper flag to keep the power domain enabled on specific drivers.
I can push it on my next PR on my branch, is it ok ?
Please test if these two patches fix the problem: http://patchwork.ozlabs.org/patch/1239143 http://patchwork.ozlabs.org/patch/1239144
Should I apply these through my tree or you plan to push these yourself ?
These patches are assigned to Simon in patchwork, and are in his tree under build-testing I think.
-- Anatolij
participants (2)
-
Anatolij Gustschin -
Neil Armstrong