[U-Boot] [PATCH v2] board/t1024rdb: enable board-level reset when issuing reset command
As board-specific reset logic, it needs to issue reset signal via CPLD when issuing 'reset' command in u-boot, this patch solves the issue of reset command not working on T1024RDB.
Signed-off-by: Shengzhou Liu Shengzhou.Liu@nxp.com --- v2: add build condition.
board/freescale/t102xrdb/t102xrdb.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index 01dbf38..0f453a7 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -167,6 +167,13 @@ unsigned long get_board_ddr_clk(void) return CONFIG_DDR_CLK_FREQ; }
+#ifdef CONFIG_T1024RDB +void board_reset(void) +{ + CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET); +} +#endif + int misc_init_r(void) { return 0;
On 01/11/2017 09:39 PM, Shengzhou Liu wrote:
As board-specific reset logic, it needs to issue reset signal via CPLD when issuing 'reset' command in u-boot, this patch solves the issue of reset command not working on T1024RDB.
Signed-off-by: Shengzhou Liu Shengzhou.Liu@nxp.com
v2: add build condition.
board/freescale/t102xrdb/t102xrdb.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index 01dbf38..0f453a7 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -167,6 +167,13 @@ unsigned long get_board_ddr_clk(void) return CONFIG_DDR_CLK_FREQ; }
+#ifdef CONFIG_T1024RDB
Shengzhou
This macro is no longer used. Please use CONFIG_TARGET_T1024RDB instead.
York
participants (2)
-
Shengzhou Liu -
york sun