Hi all,

I am using UBoot as bootloader for MPC5200B board.

After setting up all the configurations and doing all the testings,

From the bootloader I have to transfer the control to the Kernel.

(Fedora 6).

Please help me where I have to modify in the uboot code so that I can invoke the kernel or transfer the control from Uboot to kernel.

Regards,

Yasotha Balan R

Member Technical Staff - HPEG

HCL Technologies Ltd.

73,74, South Phase Road, Ambattur Indutrial Estate, Chennai 600058.

Tel: +91-044-43935000 Extn. (5085)

Mob: +91-9994309885

www.hcltech.com

www.hcl.in

DISCLAIMER: -----------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect.

-----------------------------------------------------------------------------------------------------------------------