Subject: [PATCH] mmc: mtk-sd: change some dev_err into dev_dbg

dev_err has been used for debugging and a few dev_err message are printed for normal code execution. Make them dev_dbg instead.

Signed-off-by: Fabien Parent fparent@baylibre.com

drivers/mmc/mtk-sd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c index bd1fb09d1c9b..40b0deb6b756 100644 --- a/drivers/mmc/mtk-sd.c +++ b/drivers/mmc/mtk-sd.c @@ -1169,7 +1169,7 @@ skip_fall: internal_delay |= (1 << i); }

• dev_err(dev, "Final internal delay: 0x%x\n", internal_delay);

• dev_dbg(dev, "Final internal delay: 0x%x\n", internal_delay);

  internal_delay_phase = get_best_delay(host, internal_delay); clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRRDLY_M, @@

-1177,7 +1177,7 @@ skip_fall: MSDC_PAD_TUNE_CMDRRDLY_S);

skip_internal:

• dev_err(dev, "Final cmd pad delay: %x\n", final_delay);

• dev_dbg(dev, "Final cmd pad delay: %x\n", final_delay); return final_delay == 0xff ? -EIO : 0; }

@@ -1263,7 +1263,7 @@ skip_fall: host->hs200_write_int_delay << MSDC_PAD_TUNE_DATWRDLY_S);

• dev_err(dev, "Final data pad delay: %x\n", final_delay);

• dev_dbg(dev, "Final data pad delay: %x\n", final_delay);

  return final_delay == 0xff ? -EIO : 0; }

--

Reviewed-by: Peng Fan peng.fan@nxp.com