Hi

On 6/16/20 6:30 PM, Patrick Delaunay wrote:

In the boot command used in ST boards, bootcmd_stm32mp, only support the SD card as second stage, where is found the bootfs with DISTRO.

Signed-off-by: Patrick Delaunay patrick.delaunay@st.com

include/configs/stm32mp1.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h index f271b84a59..baaf2ff89c 100644 --- a/include/configs/stm32mp1.h +++ b/include/configs/stm32mp1.h @@ -123,7 +123,7 @@

• for serial/usb: execute the stm32prog command
• for mmc boot (eMMC, SD card), boot only on the same device
• for nand or spi-nand boot, boot with on ubifs partition on UBI partition

• • for nor boot, use the default order

• • for nor boot, use SD card = mmc0
  */

#define STM32MP_BOOTCMD "bootcmd_stm32mp=" \ "echo "Boot over ${boot_device}${boot_instance}!";" \ @@ -136,6 +136,8 @@ "if test ${boot_device} = nand ||" \ " test ${boot_device} = spi-nand ;" \ "then env set boot_targets ubifs0; fi;" \

• "if test ${boot_device} = nor;" \
  

• "then env set boot_targets mmc0; fi;" \
  

  "run distro_bootcmd;" \ "fi;\0"

Reviewed-by: Patrice Chotard patrice.chotard@st.com

Thanks