Hi all,

I'm trying to run u-boot on our MPC8266-PCI board. I'm using the latest CVS tree 0.4.5 from sourceforge. I found MPC8260ADS.h and MPC8266ADS.h in the configs directory. Trying the MPC8266ADS configuration and starting it ends with no console output at all. Trying the MPC8260ADS configuration with CONFIG_ADSTYPE=CFG_8266ADS ends with a bus fault after some console outputs (see below). What am I doing wrong?

U-Boot 0.4.5 (Jul 25 2003 - 11:18:40)

MPC8260 Reset Status: External Soft, External Hard

MPC8260 Clock Configuration - Bus-to-Core Mult 3x, VCO Div 2, 60x Bus Freq 33-100, Core Freq 100-300 - dfbrg 1, corecnf 0x08, busdf 3, cpmdf 1, plldf 0, pllmf 1 - vco_out 266666664, scc_clk 66666666, brg_clk 16666666 - cpu_clk 199999998, cpm_clk 133333332, bus_clk 66666666

CPU: MPC8260 (HiP4 Rev 14, Mask A.0(A) 2K25A) at 199.999 MHz Board: Motorola MPC8266ADS I2C: ready DRAM: 16 MB FLASH: Bus Fault @ 0x00feac3c, fixup 0x00000000 Machine check in kernel mode. Caused by (from msr): regs 00f71e10 Unknown values in msr NIP: 00FEAC3C XER: 20000000 LR: 00FD6E94 REGS: 00f71e10 TRAP: 0200 DAR: 00000000MSR: 00003000 Eª: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00

GPR00: 00500092 00F71F00 04280112 00000000 00FD6E88 Bus Fault @ 0x00fe73d0, fixup 0x00000000 Machine check in kernel mode. Caused by (from msr): regs 00f71af8 Unknown values in msr NIP: 00FE73D0 XER: 00000000 LR: 00FE7360 REGS: 00f71af8 TRAP: 0200 DAR: 00000000MSR: 00003000 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00

Any hints would be appreciated.

Best regards,

Thomas Schäfer

____________________________________

GIGA STREAM GmbH

Konrad-Zuse-Str. 7 66115 Saarbrücken

Tel.: + 49 (0)681 / 95916 - 203 Fax: + 49 (0)681 / 95916 - 100 E-mail: tschaefer@giga-stream.de