Remove CONFIG_DM_ETH conversion warning to avoid board removal.

Signed-off-by: Anatolij Gustschin agust@denx.de --- arch/arm/dts/imx6qdl-wandboard.dtsi | 10 ++++++++++ configs/wandboard_defconfig | 5 ++++- include/configs/wandboard.h | 8 -------- 3 files changed, 14 insertions(+), 9 deletions(-)

diff --git a/arch/arm/dts/imx6qdl-wandboard.dtsi b/arch/arm/dts/imx6qdl-wandboard.dtsi index 90aa43d21b..35a88bf5a7 100644 --- a/arch/arm/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/dts/imx6qdl-wandboard.dtsi @@ -229,11 +229,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + phy-handle = <&ethphy>; phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + reg = <1>; + }; + }; };

&spdif { diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig index 421f80697e..d7eb8fd4b3 100644 --- a/configs/wandboard_defconfig +++ b/configs/wandboard_defconfig @@ -12,6 +12,7 @@ CONFIG_SPL=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_CMD_HDMIDETECT=y CONFIG_AHCI=y +CONFIG_SPL_TEXT_BASE=0x00908000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_SPL_FIT_PRINT=y @@ -25,7 +26,6 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOUNCE_BUFFER=y CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SPL_TEXT_BASE=0x00908000 CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_FS_EXT4=y @@ -57,6 +57,9 @@ CONFIG_SYS_I2C_MXC_I2C3=y CONFIG_DM_MMC=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y +CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 8faf5f0f78..a0a78eab27 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -40,14 +40,6 @@ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0

-/* Ethernet Configuration */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 1 -#define CONFIG_PHY_ATHEROS - /* Framebuffer */ #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN