Make it clear that we need to load a legacy-formatted (aka uImage) kernel into memory as well as the DT if used before using "spl export".

Cc: Yebio Mesfin ymesfin@ti.com Signed-off-by: Tom Rini trini@ti.com --- doc/README.falcon | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/doc/README.falcon b/doc/README.falcon index 82a254b..e9f8a75 100644 --- a/doc/README.falcon +++ b/doc/README.falcon @@ -31,9 +31,10 @@ informed to load it before running the kernel. To boot the kernel, these steps under a Falcon-aware U-Boot are required:

1. Boot the board into U-Boot. -Use the "spl export" command to generate the kernel parameters area or the DT. -U-Boot runs as when it boots the kernel, but stops before passing the control -to the kernel. +After loading the desired legacy-format kernel image into memory (and DT as +well, if used), use the "spl export" command to generate the kernel parameters +area or the DT. U-Boot runs as when it boots the kernel, but stops before +passing the control to the kernel.

2. Save the prepared snapshot into persistent media. The address where to save it must be configured into board configuration