[PATCH] cmd: add a fetch utility
While U-Boot does a pretty good job at printing information at startup about what hardware it's running on, it can be hard to take pretty pictures of this to show off on the internet (by far the most important aspect of porting a device in 2024!).
Add a small utility "ufetch" for displaying some information about U-Boot and the hardware it's running on in a similar fashion to the popular neofetch tool for *nix's [1].
While the output is meant to be useful, it should also be pleasing to look at and look good in screenshots. The ufetch command brings this to U-Boot, featuring a colorful ASCII art version of the U-Boot logo and a fancy layout.
Finally, tireless device porters can properly show off their hard work and get the internet points they so deserve!
Not everything is fully supported yet, but this seemed good enough for initial inclusion. Only one MMC device is detected, and other than SCSI other storage devices aren't supported.
[1]: https://en.wikipedia.org/wiki/Neofetch
Signed-off-by: Caleb Connolly caleb.connolly@linaro.org --- Ephemeral demo image: https://0x0.st/XVUa.png --- cmd/Kconfig | 7 ++ cmd/Makefile | 1 + cmd/ufetch.c | 201 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 209 insertions(+) create mode 100644 cmd/ufetch.c
diff --git a/cmd/Kconfig b/cmd/Kconfig index 978f44eda426..70acb5727b04 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -175,8 +175,15 @@ config CMD_CPU number of CPUs, type (e.g. manufacturer, architecture, product or internal name) and clock frequency. Other information may be available depending on the CPU driver.
+config CMD_UFETCH + bool "U-Boot fetch" + depends on BLK + help + Fetch utility for U-Boot (akin to neofetch). Prints information + about U-Boot and the board it is running on in a pleasing format. + config CMD_FWU_METADATA bool "fwu metadata read" depends on FWU_MULTI_BANK_UPDATE help diff --git a/cmd/Makefile b/cmd/Makefile index 87133cc27a8a..ffb04c8f2e0a 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -53,8 +53,9 @@ obj-$(CONFIG_CMD_CONSOLE) += console.o obj-$(CONFIG_CMD_CPU) += cpu.o obj-$(CONFIG_CMD_DATE) += date.o obj-$(CONFIG_CMD_DEMO) += demo.o obj-$(CONFIG_CMD_DM) += dm.o +obj-$(CONFIG_CMD_UFETCH) += ufetch.o obj-$(CONFIG_CMD_SOUND) += sound.o ifdef CONFIG_POST obj-$(CONFIG_CMD_DIAG) += diag.o endif diff --git a/cmd/ufetch.c b/cmd/ufetch.c new file mode 100644 index 000000000000..f7374eb2e364 --- /dev/null +++ b/cmd/ufetch.c @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* Small "fetch" utility for U-Boot */ + +#include <mmc.h> +#include <time.h> +#include <asm/global_data.h> +#include <cli.h> +#include <command.h> +#include <dm/ofnode.h> +#include <env.h> +#include <rand.h> +#include <vsprintf.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <version.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define LINE_WIDTH 40 +#define BLUE "\033[38;5;4m" +#define YELLOW "\033[38;5;11m" +#define BOLD "\033[1m" +#define RESET "\033[0m" +static const char *logo_lines[] = { + BLUE BOLD " ......::...... ", + BLUE BOLD " ...::::::::::::::::::... ", + BLUE BOLD " ..::::::::::::::::::::::::::.. ", + BLUE BOLD " .::::.:::::::::::::::...::::.::::. ", + BLUE BOLD " .::::::::::::::::::::..::::::::::::::. ", + BLUE BOLD " .::.:::::::::::::::::::" YELLOW "=*%#*" BLUE "::::::::::.::. ", + BLUE BOLD " .:::::::::::::::::....." YELLOW "*%%*-" BLUE ":....::::::::::. ", + BLUE BOLD " .:.:::...:::::::::.:-" YELLOW "===##*---==-" BLUE "::::::::::.:. ", + BLUE BOLD " .::::..::::........" YELLOW "-***#****###****-" BLUE "...::::::.:. ", + BLUE BOLD " ::.:.-" YELLOW "+***+=" BLUE "::-" YELLOW "=+**#%%%%%%%%%%%%###*= " BLUE "-::...::::. ", + BLUE BOLD ".:.::-" YELLOW "*****###%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE ":..:::: ", + BLUE BOLD ".::" YELLOW "##" BLUE ":" YELLOW "***#%%%%%%#####%%%%%%%####%%%%%####%%%*" BLUE "-.::. ", + BLUE BOLD ":.:" YELLOW "#%" BLUE "::" YELLOW "*%%%%%%%#*****##%%%#*****##%%##*****#%%+" BLUE ".::.", + BLUE BOLD ".::" YELLOW "**==#%%%%%%%##****#%%%%##****#%%%%#****###%%" BLUE ":.. ", + BLUE BOLD "..:" YELLOW "#%" BLUE "::" YELLOW "*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%#%%%%%+ " BLUE ".:.", + BLUE BOLD " ::" YELLOW "##" BLUE ":" YELLOW "+**#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%* " BLUE "-.:: ", + BLUE BOLD " ..::-" YELLOW "#****#%#%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE "-..::. ", + BLUE BOLD " ...:=" YELLOW "*****=" BLUE "::-\033[38;5;7m=+**###%%%%%%%%###**+= " BLUE "--:...::: ", + BLUE BOLD " .::.::--:........::::::--::::::......::::::. ", + BLUE BOLD " .::.....::::::::::...........:::::::::.::. ", + BLUE BOLD " .::::::::::::::::::::::::::::::::::::. ", + BLUE BOLD " .::::.::::::::::::::::::::::.::::. ", + BLUE BOLD " ..::::::::::::::::::::::::::.. ", + BLUE BOLD " ...::::::::::::::::::... ", + BLUE BOLD " ......::...... ", +}; + +enum output_lines { + FIRST, + SECOND, + KERNEL, + SYSINFO, + HOST, + UPTIME, + IP, + CMDS, + CONSOLES, + DEVICES, + FEATURES, + RELOCATION, + CORES, + MEMORY, + STORAGE, + + /* Up to 10 storage devices... Should be enough for anyone right? */ + _LAST_LINE = (STORAGE + 10), +#define LAST_LINE (_LAST_LINE - 1UL) +}; + +static int do_ufetch(struct cmd_tbl *cmdtp, int flag, int argc, + char *const argv[]) +{ + int num_lines = max(LAST_LINE + 1, ARRAY_SIZE(logo_lines)); + const char *model, *compatible; + char *ipaddr; + int n_cmds, n_cpus = 0, ret, compatlen; + ofnode np; + struct mmc *mmc; + struct blk_desc *scsi_desc; + bool skip_ascii = false; + + if (argc > 1 && strcmp(argv[1], "-n") == 0) { + skip_ascii = true; + num_lines = LAST_LINE; + } + + for (int i = 0; i < num_lines; i++) { + if (!skip_ascii) { + if (i < ARRAY_SIZE(logo_lines)) + printf("%s ", logo_lines[i]); + else + printf("%*c ", LINE_WIDTH, ' '); + } + switch (i) { + case FIRST: + compatible = ofnode_read_string(ofnode_root(), "compatible"); + if (!compatible) + compatible = "unknown"; + printf(RESET "%s\n", compatible); + compatlen = strlen(compatible); + break; + case SECOND: + for (int j = 0; j < compatlen; j++) + putc('-'); + putc('\n'); + break; + case KERNEL: + printf("Kernel:" RESET " %s\n", U_BOOT_VERSION); + break; + case SYSINFO: + printf("Config:" RESET " %s_defconfig\n", CONFIG_SYS_CONFIG_NAME); + break; + case HOST: + model = ofnode_read_string(ofnode_root(), "model"); + if (model) + printf("Host:" RESET " %s\n", model); + break; + case UPTIME: + printf("Uptime:" RESET " %ld seconds\n", get_timer(0) / 1000); + break; + case IP: + ipaddr = env_get("ipvaddr"); + if (!ipaddr) + ipaddr = "none"; + printf("IP Address:" RESET " %s", ipaddr); + ipaddr = env_get("ipv6addr"); + if (ipaddr) + printf(", %s\n", ipaddr); + else + putc('\n'); + break; + case CMDS: + n_cmds = ll_entry_count(struct cmd_tbl, cmd); + printf("Commands:" RESET " %d (help)\n", n_cmds); + break; + case CONSOLES: + printf("Consoles:" RESET " %s (%d baud)\n", env_get("stdout"), + gd->baudrate); + break; + case DEVICES: + printf("Devices:" RESET " "); + /* TODO: walk the DM tree */ + printf("Uncountable!\n"); + break; + case FEATURES: + printf("Features:" RESET " "); + if (IS_ENABLED(CONFIG_NET)) + printf("Net"); + if (IS_ENABLED(CONFIG_EFI_LOADER)) + printf(", EFI"); + printf("\n"); + break; + case RELOCATION: + if (gd->flags & GD_FLG_SKIP_RELOC) + printf("Relocated:" RESET " no\n"); + else + printf("Relocated:" RESET " to %#09lx\n", gd->relocaddr); + break; + case CORES: + ofnode_for_each_subnode(np, ofnode_path("/cpus")) { + if (ofnode_name_eq(np, "cpu")) + n_cpus++; + } + printf("CPU:" RESET " %d (1 in use)\n", n_cpus); + break; + case MEMORY: + printf("Memory:" RESET " %lu MB\n", (ulong)gd->ram_size >> 20); + break; + case STORAGE: + default: + if (i == STORAGE && get_mmc_num() > 0) { + mmc = find_mmc_device(0); + if (mmc) + printf("Storage:" RESET " mmc 0: %llu MB", mmc->capacity >> 20); + } + if (i >= STORAGE + 1) { + ret = blk_get_desc(UCLASS_SCSI, i - (STORAGE + 1), &scsi_desc); + if (!ret && scsi_desc->type != DEV_TYPE_UNKNOWN) + /* The calculation here is really lossy but close enough */ + printf("Storage:" RESET " scsi %d: %lu MB", i - (STORAGE + 1), + ((scsi_desc->lba >> 9) * scsi_desc->blksz) >> 11); + } + printf("\n"); + } + } + + printf(RESET "\n\n"); + + return 0; +} + +U_BOOT_CMD(ufetch, 2, 1, do_ufetch, + "U-Boot fetch utility", + "Print information about your device.\n" + " -n Don't print the ASCII logo" +);
Hi Caleb,
On Thu, 8 Aug 2024 at 10:32, Caleb Connolly caleb.connolly@linaro.org wrote:
While U-Boot does a pretty good job at printing information at startup about what hardware it's running on, it can be hard to take pretty pictures of this to show off on the internet (by far the most important aspect of porting a device in 2024!).
Add a small utility "ufetch" for displaying some information about U-Boot
and
the hardware it's running on in a similar fashion to the popular neofetch
tool
for *nix's [1].
While the output is meant to be useful, it should also be pleasing to
look at
and look good in screenshots. The ufetch command brings this to U-Boot, featuring a colorful ASCII art version of the U-Boot logo and a fancy
layout.
Finally, tireless device porters can properly show off their hard work
and get
the internet points they so deserve!
Not everything is fully supported yet, but this seemed good enough for
initial
inclusion. Only one MMC device is detected, and other than SCSI other
storage
devices aren't supported.
Signed-off-by: Caleb Connolly caleb.connolly@linaro.org
Ephemeral demo image: https://0x0.st/XVUa.png
cmd/Kconfig | 7 ++ cmd/Makefile | 1 + cmd/ufetch.c | 201 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 209 insertions(+) create mode 100644 cmd/ufetch.c
Very cute!
diff --git a/cmd/Kconfig b/cmd/Kconfig index 978f44eda426..70acb5727b04 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -175,8 +175,15 @@ config CMD_CPU number of CPUs, type (e.g. manufacturer, architecture, product
or
internal name) and clock frequency. Other information may be available depending on the CPU driver.+config CMD_UFETCH
bool "U-Boot fetch"
How about default y if SANDBOX so that this gets built for that. You should also add doc/ and test/ for the command (although the test can be very basic).
depends on BLKhelpFetch utility for U-Boot (akin to neofetch). Prints informationabout U-Boot and the board it is running on in a pleasing
format.
config CMD_FWU_METADATA bool "fwu metadata read" depends on FWU_MULTI_BANK_UPDATE help diff --git a/cmd/Makefile b/cmd/Makefile index 87133cc27a8a..ffb04c8f2e0a 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -53,8 +53,9 @@ obj-$(CONFIG_CMD_CONSOLE) += console.o obj-$(CONFIG_CMD_CPU) += cpu.o obj-$(CONFIG_CMD_DATE) += date.o obj-$(CONFIG_CMD_DEMO) += demo.o obj-$(CONFIG_CMD_DM) += dm.o +obj-$(CONFIG_CMD_UFETCH) += ufetch.o obj-$(CONFIG_CMD_SOUND) += sound.o ifdef CONFIG_POST obj-$(CONFIG_CMD_DIAG) += diag.o endif diff --git a/cmd/ufetch.c b/cmd/ufetch.c new file mode 100644 index 000000000000..f7374eb2e364 --- /dev/null +++ b/cmd/ufetch.c @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0
+/* Small "fetch" utility for U-Boot */
Isn't it a command, rather than a utility? I think of a utility as a program I run.
+#include <mmc.h> +#include <time.h> +#include <asm/global_data.h> +#include <cli.h> +#include <command.h> +#include <dm/ofnode.h> +#include <env.h> +#include <rand.h> +#include <vsprintf.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <version.h>
Please check [1]
+DECLARE_GLOBAL_DATA_PTR;
+#define LINE_WIDTH 40 +#define BLUE "\033[38;5;4m" +#define YELLOW "\033[38;5;11m" +#define BOLD "\033[1m" +#define RESET "\033[0m" +static const char *logo_lines[] = {
BLUE BOLD " ......::...... ",BLUE BOLD " ...::::::::::::::::::... ",BLUE BOLD " ..::::::::::::::::::::::::::.. ",BLUE BOLD " .::::.:::::::::::::::...::::.::::. ",BLUE BOLD " .::::::::::::::::::::..::::::::::::::. ",BLUE BOLD " .::.:::::::::::::::::::" YELLOW "=*%#*" BLUE
"::::::::::.::. ",
BLUE BOLD " .:::::::::::::::::....." YELLOW "*%%*-" BLUE
":....::::::::::. ",
BLUE BOLD " .:.:::...:::::::::.:-" YELLOW "===##*---==-" BLUE
"::::::::::.:. ",
BLUE BOLD " .::::..::::........" YELLOW "-***#****###****-" BLUE
"...::::::.:. ",
BLUE BOLD " ::.:.-" YELLOW "+***+=" BLUE "::-" YELLOW
"=+**#%%%%%%%%%%%%###*= " BLUE "-::...::::. ",
BLUE BOLD ".:.::-" YELLOW "*****###%%%%%%%%%%%%%%%%%%%%%%%%%%#*="
BLUE ":..:::: ",
BLUE BOLD ".::" YELLOW "##" BLUE ":" YELLOW
"***#%%%%%%#####%%%%%%%####%%%%%####%%%*" BLUE "-.::. ",
BLUE BOLD ":.:" YELLOW "#%" BLUE "::" YELLOW
"*%%%%%%%#*****##%%%#*****##%%##*****#%%+" BLUE ".::.",
BLUE BOLD ".::" YELLOW
"**==#%%%%%%%##****#%%%%##****#%%%%#****###%%" BLUE ":.. ",
BLUE BOLD "..:" YELLOW "#%" BLUE "::" YELLOW
"*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%#%%%%%+ " BLUE ".:.",
BLUE BOLD " ::" YELLOW "##" BLUE ":" YELLOW
"+**#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%* " BLUE "-.:: ",
BLUE BOLD " ..::-" YELLOW "#****#%#%%%%%%%%%%%%%%%%%%%%%%%%%%#*="
BLUE "-..::. ",
BLUE BOLD " ...:=" YELLOW "*****=" BLUE
"::-\033[38;5;7m=+**###%%%%%%%%###**+= " BLUE "--:...::: ",
BLUE BOLD " .::.::--:........::::::--::::::......::::::. ",BLUE BOLD " .::.....::::::::::...........:::::::::.::. ",BLUE BOLD " .::::::::::::::::::::::::::::::::::::. ",BLUE BOLD " .::::.::::::::::::::::::::::.::::. ",BLUE BOLD " ..::::::::::::::::::::::::::.. ",BLUE BOLD " ...::::::::::::::::::... ",BLUE BOLD " ......::...... ",+};
+enum output_lines {
FIRST,SECOND,KERNEL,SYSINFO,HOST,UPTIME,IP,CMDS,CONSOLES,DEVICES,FEATURES,RELOCATION,CORES,MEMORY,STORAGE,/* Up to 10 storage devices... Should be enough for anyone right?
*/
_LAST_LINE = (STORAGE + 10),+#define LAST_LINE (_LAST_LINE - 1UL) +};
+static int do_ufetch(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])+{
int num_lines = max(LAST_LINE + 1, ARRAY_SIZE(logo_lines));const char *model, *compatible;char *ipaddr;int n_cmds, n_cpus = 0, ret, compatlen;ofnode np;struct mmc *mmc;struct blk_desc *scsi_desc;bool skip_ascii = false;if (argc > 1 && strcmp(argv[1], "-n") == 0) {skip_ascii = true;num_lines = LAST_LINE;}for (int i = 0; i < num_lines; i++) {if (!skip_ascii) {if (i < ARRAY_SIZE(logo_lines))printf("%s ", logo_lines[i]);elseprintf("%*c ", LINE_WIDTH, ' ');}switch (i) {case FIRST:compatible = ofnode_read_string(ofnode_root(),
"compatible");
if (!compatible)compatible = "unknown";printf(RESET "%s\n", compatible);compatlen = strlen(compatible);break;case SECOND:for (int j = 0; j < compatlen; j++)putc('-');putc('\n');break;case KERNEL:printf("Kernel:" RESET " %s\n", U_BOOT_VERSION);break;case SYSINFO:printf("Config:" RESET " %s_defconfig\n",
CONFIG_SYS_CONFIG_NAME);
break;case HOST:model = ofnode_read_string(ofnode_root(),
"model");
if (model)printf("Host:" RESET " %s\n", model);break;case UPTIME:printf("Uptime:" RESET " %ld seconds\n",
get_timer(0) / 1000);
break;case IP:ipaddr = env_get("ipvaddr");if (!ipaddr)ipaddr = "none";printf("IP Address:" RESET " %s", ipaddr);ipaddr = env_get("ipv6addr");if (ipaddr)printf(", %s\n", ipaddr);elseputc('\n');break;case CMDS:n_cmds = ll_entry_count(struct cmd_tbl, cmd);printf("Commands:" RESET " %d (help)\n", n_cmds);break;case CONSOLES:printf("Consoles:" RESET " %s (%d baud)\n",
env_get("stdout"),
gd->baudrate);break;case DEVICES:printf("Devices:" RESET " ");/* TODO: walk the DM tree */printf("Uncountable!\n");
See dm_announce() for how to do that.
break;case FEATURES:printf("Features:" RESET " ");if (IS_ENABLED(CONFIG_NET))printf("Net");if (IS_ENABLED(CONFIG_EFI_LOADER))printf(", EFI");
How about EFI_LOADER ? After all, U-Boot can run as an EFI app so 'EFI' might be better reserved for that.
printf("\n");break;case RELOCATION:if (gd->flags & GD_FLG_SKIP_RELOC)printf("Relocated:" RESET " no\n");elseprintf("Relocated:" RESET " to %#09lx\n",
gd->relocaddr);
Not for this patch but I'd really like to figure out a way to enable/disable ANSI codes globally in U-Boot. For example, we should disable them in tests, or when redirecting sandbox to a file. It affects EFI tests too...so if you have any ideas... :-)
break;case CORES:ofnode_for_each_subnode(np, ofnode_path("/cpus"))
{
if (ofnode_name_eq(np, "cpu"))n_cpus++;}
uclass_id_count(UCLASS_CPU)
printf("CPU:" RESET " %d (1 in use)\n", n_cpus);break;case MEMORY:printf("Memory:" RESET " %lu MB\n",
(ulong)gd->ram_size >> 20);
break;case STORAGE:default:if (i == STORAGE && get_mmc_num() > 0) {mmc = find_mmc_device(0);if (mmc)printf("Storage:" RESET " mmc 0:
%llu MB", mmc->capacity >> 20);
}
How about iterating through UCLASS_BLK ?
if (i >= STORAGE + 1) {ret = blk_get_desc(UCLASS_SCSI, i -
(STORAGE + 1), &scsi_desc);
if (!ret && scsi_desc->type !=
DEV_TYPE_UNKNOWN)
/* The calculation here is really
lossy but close enough */
printf("Storage:" RESET " scsi
%d: %lu MB", i - (STORAGE + 1),
((scsi_desc->lba >> 9) *
scsi_desc->blksz) >> 11);
You can use print_size() - and same above I suppose
}printf("\n");}}printf(RESET "\n\n");return 0;+}
+U_BOOT_CMD(ufetch, 2, 1, do_ufetch,
"U-Boot fetch utility","Print information about your device.\n"" -n Don't print the ASCII logo"+);
2.46.0
Regards, Simon
[1] https://docs.u-boot.org/en/latest/develop/codingstyle.html#include-files
Hi Simon,
On 09/08/2024 03:55, Simon Glass wrote:
Hi Caleb,
On Thu, 8 Aug 2024 at 10:32, Caleb Connolly <caleb.connolly@linaro.org mailto:caleb.connolly@linaro.org> wrote:
While U-Boot does a pretty good job at printing information at startup about what hardware it's running on, it can be hard to take pretty pictures of this to show off on the internet (by far the most important aspect of porting a device in 2024!).
Add a small utility "ufetch" for displaying some information about
U-Boot and
the hardware it's running on in a similar fashion to the popular
neofetch tool
for *nix's [1].
While the output is meant to be useful, it should also be pleasing to
look at
and look good in screenshots. The ufetch command brings this to U-Boot, featuring a colorful ASCII art version of the U-Boot logo and a fancy
layout.
Finally, tireless device porters can properly show off their hard
work and get
the internet points they so deserve!
Not everything is fully supported yet, but this seemed good enough
for initial
inclusion. Only one MMC device is detected, and other than SCSI other
storage
devices aren't supported.
https://en.wikipedia.org/wiki/Neofetch
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org
mailto:caleb.connolly@linaro.org>
Ephemeral demo image: https://0x0.st/XVUa.png https://0x0.st/XVUa.png
cmd/Kconfig | 7 ++ cmd/Makefile | 1 + cmd/ufetch.c | 201 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 209 insertions(+) create mode 100644 cmd/ufetch.c
Very cute!
diff --git a/cmd/Kconfig b/cmd/Kconfig index 978f44eda426..70acb5727b04 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -175,8 +175,15 @@ config CMD_CPU number of CPUs, type (e.g. manufacturer, architecture,
product or
internal name) and clock frequency. Other information may be available depending on the CPU driver.
+config CMD_UFETCH + bool "U-Boot fetch"
How about default y if SANDBOX so that this gets built for that. You should also add doc/ and test/ for the command (although the test can be very basic).
I was really aiming for cmd/2048.c levels of expectation and usability here, not to make this a rugged part of U-Boot's feature set (if someone else would like to go the extra mile they're certainly welcome to).
Making it default y for sandbox so we can at least make sure it compiles sounds reasonable though.
+ depends on BLK + help + Fetch utility for U-Boot (akin to neofetch). Prints information + about U-Boot and the board it is running on in a pleasing
format.
config CMD_FWU_METADATA bool "fwu metadata read" depends on FWU_MULTI_BANK_UPDATE help diff --git a/cmd/Makefile b/cmd/Makefile index 87133cc27a8a..ffb04c8f2e0a 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -53,8 +53,9 @@ obj-$(CONFIG_CMD_CONSOLE) += console.o obj-$(CONFIG_CMD_CPU) += cpu.o obj-$(CONFIG_CMD_DATE) += date.o obj-$(CONFIG_CMD_DEMO) += demo.o obj-$(CONFIG_CMD_DM) += dm.o +obj-$(CONFIG_CMD_UFETCH) += ufetch.o obj-$(CONFIG_CMD_SOUND) += sound.o ifdef CONFIG_POST obj-$(CONFIG_CMD_DIAG) += diag.o endif diff --git a/cmd/ufetch.c b/cmd/ufetch.c new file mode 100644 index 000000000000..f7374eb2e364 --- /dev/null +++ b/cmd/ufetch.c @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0
+/* Small "fetch" utility for U-Boot */
Isn't it a command, rather than a utility? I think of a utility as a program I run.
I feel like you could ask 5 different people about this and get 5 different answers. As a native british english speaker I would view "utilities" as a subset of "commands" in this context. This isn't a high effort contribution for me so I'm really fine with whatever.
+#include <mmc.h> +#include <time.h> +#include <asm/global_data.h> +#include <cli.h> +#include <command.h> +#include <dm/ofnode.h> +#include <env.h> +#include <rand.h> +#include <vsprintf.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <version.h>
Please check [1]
Sure, I'll order these alphabetically.
+DECLARE_GLOBAL_DATA_PTR;
+#define LINE_WIDTH 40 +#define BLUE "\033[38;5;4m" +#define YELLOW "\033[38;5;11m" +#define BOLD "\033[1m" +#define RESET "\033[0m" +static const char *logo_lines[] = { + BLUE BOLD " ......::...... ", + BLUE BOLD " ...::::::::::::::::::... ", + BLUE BOLD " ..::::::::::::::::::::::::::.. ", + BLUE BOLD " .::::.:::::::::::::::...::::.::::. ", + BLUE BOLD " .::::::::::::::::::::..::::::::::::::. ", + BLUE BOLD " .::.:::::::::::::::::::" YELLOW "=*%#*" BLUE
"::::::::::.::. ",
+ BLUE BOLD " .:::::::::::::::::....." YELLOW "*%%*-" BLUE
":....::::::::::. ",
+ BLUE BOLD " .:.:::...:::::::::.:-" YELLOW "===##*---==-"
BLUE "::::::::::.:. ",
+ BLUE BOLD " .::::..::::........" YELLOW "-***#****###****-"
BLUE "...::::::.:. ",
+ BLUE BOLD " ::.:.-" YELLOW "+***+=" BLUE "::-" YELLOW
"=+**#%%%%%%%%%%%%###*= " BLUE "-::...::::. ",
+ BLUE BOLD ".:.::-" YELLOW
"*****###%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE ":..:::: ",
+ BLUE BOLD ".::" YELLOW "##" BLUE ":" YELLOW
"***#%%%%%%#####%%%%%%%####%%%%%####%%%*" BLUE "-.::. ",
+ BLUE BOLD ":.:" YELLOW "#%" BLUE "::" YELLOW
"*%%%%%%%#*****##%%%#*****##%%##*****#%%+" BLUE ".::.",
+ BLUE BOLD ".::" YELLOW
"**==#%%%%%%%##****#%%%%##****#%%%%#****###%%" BLUE ":.. ",
+ BLUE BOLD "..:" YELLOW "#%" BLUE "::" YELLOW
"*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%#%%%%%+ " BLUE ".:.",
+ BLUE BOLD " ::" YELLOW "##" BLUE ":" YELLOW
"+**#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%* " BLUE "-.:: ",
+ BLUE BOLD " ..::-" YELLOW
"#****#%#%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE "-..::. ",
+ BLUE BOLD " ...:=" YELLOW "*****=" BLUE
"::-\033[38;5;7m=+**###%%%%%%%%###**+= " BLUE "--:...::: ",
+ BLUE BOLD " .::.::--:........::::::--::::::......::::::. ", + BLUE BOLD " .::.....::::::::::...........:::::::::.::. ", + BLUE BOLD " .::::::::::::::::::::::::::::::::::::. ", + BLUE BOLD " .::::.::::::::::::::::::::::.::::. ", + BLUE BOLD " ..::::::::::::::::::::::::::.. ", + BLUE BOLD " ...::::::::::::::::::... ", + BLUE BOLD " ......::...... ", +};
+enum output_lines { + FIRST, + SECOND, + KERNEL, + SYSINFO, + HOST, + UPTIME, + IP, + CMDS, + CONSOLES, + DEVICES, + FEATURES, + RELOCATION, + CORES, + MEMORY, + STORAGE,
+ /* Up to 10 storage devices... Should be enough for anyone
right? */
+ _LAST_LINE = (STORAGE + 10), +#define LAST_LINE (_LAST_LINE - 1UL) +};
+static int do_ufetch(struct cmd_tbl *cmdtp, int flag, int argc, + char *const argv[]) +{ + int num_lines = max(LAST_LINE + 1, ARRAY_SIZE(logo_lines)); + const char *model, *compatible; + char *ipaddr; + int n_cmds, n_cpus = 0, ret, compatlen; + ofnode np; + struct mmc *mmc; + struct blk_desc *scsi_desc; + bool skip_ascii = false;
+ if (argc > 1 && strcmp(argv[1], "-n") == 0) { + skip_ascii = true; + num_lines = LAST_LINE; + }
+ for (int i = 0; i < num_lines; i++) { + if (!skip_ascii) { + if (i < ARRAY_SIZE(logo_lines)) + printf("%s ", logo_lines[i]); + else + printf("%*c ", LINE_WIDTH, ' '); + } + switch (i) { + case FIRST: + compatible =
ofnode_read_string(ofnode_root(), "compatible");
+ if (!compatible) + compatible = "unknown"; + printf(RESET "%s\n", compatible); + compatlen = strlen(compatible); + break; + case SECOND: + for (int j = 0; j < compatlen; j++) + putc('-'); + putc('\n'); + break; + case KERNEL: + printf("Kernel:" RESET " %s\n", U_BOOT_VERSION); + break; + case SYSINFO: + printf("Config:" RESET " %s_defconfig\n",
CONFIG_SYS_CONFIG_NAME);
+ break; + case HOST: + model = ofnode_read_string(ofnode_root(),
"model");
+ if (model) + printf("Host:" RESET " %s\n", model); + break; + case UPTIME: + printf("Uptime:" RESET " %ld seconds\n",
get_timer(0) / 1000);
+ break; + case IP: + ipaddr = env_get("ipvaddr"); + if (!ipaddr) + ipaddr = "none"; + printf("IP Address:" RESET " %s", ipaddr); + ipaddr = env_get("ipv6addr"); + if (ipaddr) + printf(", %s\n", ipaddr); + else + putc('\n'); + break; + case CMDS: + n_cmds = ll_entry_count(struct cmd_tbl, cmd); + printf("Commands:" RESET " %d (help)\n", n_cmds); + break; + case CONSOLES: + printf("Consoles:" RESET " %s (%d baud)\n",
env_get("stdout"),
+ gd->baudrate); + break; + case DEVICES: + printf("Devices:" RESET " "); + /* TODO: walk the DM tree */ + printf("Uncountable!\n");
See dm_announce() for how to do that.
+ break; + case FEATURES: + printf("Features:" RESET " "); + if (IS_ENABLED(CONFIG_NET)) + printf("Net"); + if (IS_ENABLED(CONFIG_EFI_LOADER)) + printf(", EFI");
How about EFI_LOADER ? After all, U-Boot can run as an EFI app so 'EFI' might be better reserved for that.
+ printf("\n"); + break; + case RELOCATION: + if (gd->flags & GD_FLG_SKIP_RELOC) + printf("Relocated:" RESET " no\n"); + else + printf("Relocated:" RESET " to
%#09lx\n", gd->relocaddr);
Not for this patch but I'd really like to figure out a way to enable/disable ANSI codes globally in U-Boot. For example, we should disable them in tests, or when redirecting sandbox to a file. It affects EFI tests too...so if you have any ideas... :-)
Only thing that comes to mind would be adding a compile time flag to printf which teaches it to parse and skip ANSI escape codes.
+ break; + case CORES: + ofnode_for_each_subnode(np,
ofnode_path("/cpus")) {
+ if (ofnode_name_eq(np, "cpu")) + n_cpus++; + }
uclass_id_count(UCLASS_CPU)
+ printf("CPU:" RESET " %d (1 in use)\n", n_cpus); + break; + case MEMORY: + printf("Memory:" RESET " %lu MB\n",
(ulong)gd->ram_size >> 20);
+ break; + case STORAGE: + default: + if (i == STORAGE && get_mmc_num() > 0) { + mmc = find_mmc_device(0); + if (mmc) + printf("Storage:" RESET "
mmc 0: %llu MB", mmc->capacity >> 20);
+ }
How about iterating through UCLASS_BLK ?
Probably a much more sensible approach tbh, can you easily determine the size of a block device?
+ if (i >= STORAGE + 1) { + ret = blk_get_desc(UCLASS_SCSI, i -
(STORAGE + 1), &scsi_desc);
+ if (!ret && scsi_desc->type !=
DEV_TYPE_UNKNOWN)
+ /* The calculation here is
really lossy but close enough */
+ printf("Storage:" RESET "
scsi %d: %lu MB", i - (STORAGE + 1),
+ ((scsi_desc->lba >> 9)
- scsi_desc->blksz) >> 11);
You can use print_size() - and same above I suppose
haha yeahp i should really do that instead.
Thanks for the review!
+ } + printf("\n"); + } + }
+ printf(RESET "\n\n");
+ return 0; +}
+U_BOOT_CMD(ufetch, 2, 1, do_ufetch, + "U-Boot fetch utility", + "Print information about your device.\n" + " -n Don't print the ASCII logo"
+);
2.46.0
Regards, Simon
[1] https://docs.u-boot.org/en/latest/develop/codingstyle.html#include-files https://docs.u-boot.org/en/latest/develop/codingstyle.html#include-files
Hi Caleb,
On Fri, 9 Aug 2024 at 11:00, Caleb Connolly caleb.connolly@linaro.org wrote:
Hi Simon,
On 09/08/2024 03:55, Simon Glass wrote:
Hi Caleb,
On Thu, 8 Aug 2024 at 10:32, Caleb Connolly <caleb.connolly@linaro.org mailto:caleb.connolly@linaro.org> wrote:
While U-Boot does a pretty good job at printing information at startup about what hardware it's running on, it can be hard to take pretty pictures of this to show off on the internet (by far the most important aspect of porting a device in 2024!).
Add a small utility "ufetch" for displaying some information about
U-Boot and
the hardware it's running on in a similar fashion to the popular
neofetch tool
for *nix's [1].
While the output is meant to be useful, it should also be pleasing to
look at
and look good in screenshots. The ufetch command brings this to U-Boot, featuring a colorful ASCII art version of the U-Boot logo and a fancy
layout.
Finally, tireless device porters can properly show off their hard
work and get
the internet points they so deserve!
Not everything is fully supported yet, but this seemed good enough
for initial
inclusion. Only one MMC device is detected, and other than SCSI other
storage
devices aren't supported.
https://en.wikipedia.org/wiki/Neofetch
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org
mailto:caleb.connolly@linaro.org>
Ephemeral demo image: https://0x0.st/XVUa.png https://0x0.st/XVUa.png
cmd/Kconfig | 7 ++ cmd/Makefile | 1 + cmd/ufetch.c | 201 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 209 insertions(+) create mode 100644 cmd/ufetch.c
Very cute!
diff --git a/cmd/Kconfig b/cmd/Kconfig index 978f44eda426..70acb5727b04 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -175,8 +175,15 @@ config CMD_CPU number of CPUs, type (e.g. manufacturer, architecture,
product or
internal name) and clock frequency. Other information may be available depending on the CPU driver.+config CMD_UFETCH
bool "U-Boot fetch"How about default y if SANDBOX so that this gets built for that. You should also add doc/ and test/ for the command (although the test can be very basic).
I was really aiming for cmd/2048.c levels of expectation and usability here, not to make this a rugged part of U-Boot's feature set (if someone else would like to go the extra mile they're certainly welcome to).
Making it default y for sandbox so we can at least make sure it compiles sounds reasonable though.
depends on BLKhelpFetch utility for U-Boot (akin to neofetch). Prints informationabout U-Boot and the board it is running on in a pleasingformat.
config CMD_FWU_METADATA bool "fwu metadata read" depends on FWU_MULTI_BANK_UPDATE help diff --git a/cmd/Makefile b/cmd/Makefile index 87133cc27a8a..ffb04c8f2e0a 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -53,8 +53,9 @@ obj-$(CONFIG_CMD_CONSOLE) += console.o obj-$(CONFIG_CMD_CPU) += cpu.o obj-$(CONFIG_CMD_DATE) += date.o obj-$(CONFIG_CMD_DEMO) += demo.o obj-$(CONFIG_CMD_DM) += dm.o +obj-$(CONFIG_CMD_UFETCH) += ufetch.o obj-$(CONFIG_CMD_SOUND) += sound.o ifdef CONFIG_POST obj-$(CONFIG_CMD_DIAG) += diag.o endif diff --git a/cmd/ufetch.c b/cmd/ufetch.c new file mode 100644 index 000000000000..f7374eb2e364 --- /dev/null +++ b/cmd/ufetch.c @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0
+/* Small "fetch" utility for U-Boot */
Isn't it a command, rather than a utility? I think of a utility as a program I run.
I feel like you could ask 5 different people about this and get 5 different answers. As a native british english speaker I would view "utilities" as a subset of "commands" in this context. This isn't a high effort contribution for me so I'm really fine with whatever.
OK I see, fair enough.
+#include <mmc.h> +#include <time.h> +#include <asm/global_data.h> +#include <cli.h> +#include <command.h> +#include <dm/ofnode.h> +#include <env.h> +#include <rand.h> +#include <vsprintf.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <version.h>
Please check [1]
Sure, I'll order these alphabetically.
+DECLARE_GLOBAL_DATA_PTR;
+#define LINE_WIDTH 40 +#define BLUE "\033[38;5;4m" +#define YELLOW "\033[38;5;11m" +#define BOLD "\033[1m" +#define RESET "\033[0m" +static const char *logo_lines[] = {
BLUE BOLD " ......::...... ",BLUE BOLD " ...::::::::::::::::::... ",BLUE BOLD " ..::::::::::::::::::::::::::.. ",BLUE BOLD " .::::.:::::::::::::::...::::.::::. ",BLUE BOLD " .::::::::::::::::::::..::::::::::::::. ",BLUE BOLD " .::.:::::::::::::::::::" YELLOW "=*%#*" BLUE"::::::::::.::. ",
BLUE BOLD " .:::::::::::::::::....." YELLOW "*%%*-" BLUE":....::::::::::. ",
BLUE BOLD " .:.:::...:::::::::.:-" YELLOW "===##*---==-"BLUE "::::::::::.:. ",
BLUE BOLD " .::::..::::........" YELLOW "-***#****###****-"BLUE "...::::::.:. ",
BLUE BOLD " ::.:.-" YELLOW "+***+=" BLUE "::-" YELLOW"=+**#%%%%%%%%%%%%###*= " BLUE "-::...::::. ",
BLUE BOLD ".:.::-" YELLOW"*****###%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE ":..:::: ",
BLUE BOLD ".::" YELLOW "##" BLUE ":" YELLOW"***#%%%%%%#####%%%%%%%####%%%%%####%%%*" BLUE "-.::. ",
BLUE BOLD ":.:" YELLOW "#%" BLUE "::" YELLOW"*%%%%%%%#*****##%%%#*****##%%##*****#%%+" BLUE ".::.",
BLUE BOLD ".::" YELLOW"**==#%%%%%%%##****#%%%%##****#%%%%#****###%%" BLUE ":.. ",
BLUE BOLD "..:" YELLOW "#%" BLUE "::" YELLOW"*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%#%%%%%+ " BLUE ".:.",
BLUE BOLD " ::" YELLOW "##" BLUE ":" YELLOW"+**#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%* " BLUE "-.:: ",
BLUE BOLD " ..::-" YELLOW"#****#%#%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE "-..::. ",
BLUE BOLD " ...:=" YELLOW "*****=" BLUE"::-\033[38;5;7m=+**###%%%%%%%%###**+= " BLUE "--:...::: ",
BLUE BOLD " .::.::--:........::::::--::::::......::::::. ",BLUE BOLD " .::.....::::::::::...........:::::::::.::. ",BLUE BOLD " .::::::::::::::::::::::::::::::::::::. ",BLUE BOLD " .::::.::::::::::::::::::::::.::::. ",BLUE BOLD " ..::::::::::::::::::::::::::.. ",BLUE BOLD " ...::::::::::::::::::... ",BLUE BOLD " ......::...... ",+};
+enum output_lines {
FIRST,SECOND,KERNEL,SYSINFO,HOST,UPTIME,IP,CMDS,CONSOLES,DEVICES,FEATURES,RELOCATION,CORES,MEMORY,STORAGE,/* Up to 10 storage devices... Should be enough for anyoneright? */
_LAST_LINE = (STORAGE + 10),+#define LAST_LINE (_LAST_LINE - 1UL) +};
+static int do_ufetch(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])+{
int num_lines = max(LAST_LINE + 1, ARRAY_SIZE(logo_lines));const char *model, *compatible;char *ipaddr;int n_cmds, n_cpus = 0, ret, compatlen;ofnode np;struct mmc *mmc;struct blk_desc *scsi_desc;bool skip_ascii = false;if (argc > 1 && strcmp(argv[1], "-n") == 0) {skip_ascii = true;num_lines = LAST_LINE;}for (int i = 0; i < num_lines; i++) {if (!skip_ascii) {if (i < ARRAY_SIZE(logo_lines))printf("%s ", logo_lines[i]);elseprintf("%*c ", LINE_WIDTH, ' ');}switch (i) {case FIRST:compatible =ofnode_read_string(ofnode_root(), "compatible");
if (!compatible)compatible = "unknown";printf(RESET "%s\n", compatible);compatlen = strlen(compatible);break;case SECOND:for (int j = 0; j < compatlen; j++)putc('-');putc('\n');break;case KERNEL:printf("Kernel:" RESET " %s\n", U_BOOT_VERSION);break;case SYSINFO:printf("Config:" RESET " %s_defconfig\n",CONFIG_SYS_CONFIG_NAME);
break;case HOST:model = ofnode_read_string(ofnode_root(),"model");
if (model)printf("Host:" RESET " %s\n", model);break;case UPTIME:printf("Uptime:" RESET " %ld seconds\n",get_timer(0) / 1000);
break;case IP:ipaddr = env_get("ipvaddr");if (!ipaddr)ipaddr = "none";printf("IP Address:" RESET " %s", ipaddr);ipaddr = env_get("ipv6addr");if (ipaddr)printf(", %s\n", ipaddr);elseputc('\n');break;case CMDS:n_cmds = ll_entry_count(struct cmd_tbl, cmd);printf("Commands:" RESET " %d (help)\n", n_cmds);break;case CONSOLES:printf("Consoles:" RESET " %s (%d baud)\n",env_get("stdout"),
gd->baudrate);break;case DEVICES:printf("Devices:" RESET " ");/* TODO: walk the DM tree */printf("Uncountable!\n");See dm_announce() for how to do that.
break;case FEATURES:printf("Features:" RESET " ");if (IS_ENABLED(CONFIG_NET))printf("Net");if (IS_ENABLED(CONFIG_EFI_LOADER))printf(", EFI");How about EFI_LOADER ? After all, U-Boot can run as an EFI app so 'EFI' might be better reserved for that.
printf("\n");break;case RELOCATION:if (gd->flags & GD_FLG_SKIP_RELOC)printf("Relocated:" RESET " no\n");elseprintf("Relocated:" RESET " to%#09lx\n", gd->relocaddr);
Not for this patch but I'd really like to figure out a way to enable/disable ANSI codes globally in U-Boot. For example, we should disable them in tests, or when redirecting sandbox to a file. It affects EFI tests too...so if you have any ideas... :-)
Only thing that comes to mind would be adding a compile time flag to printf which teaches it to parse and skip ANSI escape codes.
Ideally it would have the option to be run-time, if we want to pay an extra penalty. Then we can use the same sandbox build with tests as we do for normal usage.
break;case CORES:ofnode_for_each_subnode(np,ofnode_path("/cpus")) {
if (ofnode_name_eq(np, "cpu"))n_cpus++;}uclass_id_count(UCLASS_CPU)
printf("CPU:" RESET " %d (1 in use)\n", n_cpus);break;case MEMORY:printf("Memory:" RESET " %lu MB\n",(ulong)gd->ram_size >> 20);
break;case STORAGE:default:if (i == STORAGE && get_mmc_num() > 0) {mmc = find_mmc_device(0);if (mmc)printf("Storage:" RESET "mmc 0: %llu MB", mmc->capacity >> 20);
}How about iterating through UCLASS_BLK ?
Probably a much more sensible approach tbh, can you easily determine the size of a block device?
You can do something like this:
struct udevice *dev; // block device struct blk_desc *desc = dev_get_uclass_plat(dev);
size = desc->lba * desc->blksz
if (i >= STORAGE + 1) {ret = blk_get_desc(UCLASS_SCSI, i -(STORAGE + 1), &scsi_desc);
if (!ret && scsi_desc->type !=DEV_TYPE_UNKNOWN)
/* The calculation here isreally lossy but close enough */
printf("Storage:" RESET "scsi %d: %lu MB", i - (STORAGE + 1),
((scsi_desc->lba >> 9)
- scsi_desc->blksz) >> 11);
You can use print_size() - and same above I suppose
haha yeahp i should really do that instead.
Thanks for the review!
}printf("\n");}}printf(RESET "\n\n");return 0;+}
+U_BOOT_CMD(ufetch, 2, 1, do_ufetch,
"U-Boot fetch utility","Print information about your device.\n"" -n Don't print the ASCII logo"+);
2.46.0
[1] https://docs.u-boot.org/en/latest/develop/codingstyle.html#include-files https://docs.u-boot.org/en/latest/develop/codingstyle.html#include-files
Regards, Simon
On 8/8/24 18:24, Caleb Connolly wrote:
While U-Boot does a pretty good job at printing information at startup about what hardware it's running on, it can be hard to take pretty pictures of this to show off on the internet (by far the most important aspect of porting a device in 2024!).
Add a small utility "ufetch" for displaying some information about U-Boot and the hardware it's running on in a similar fashion to the popular neofetch tool for *nix's [1].
While the output is meant to be useful, it should also be pleasing to look at and look good in screenshots. The ufetch command brings this to U-Boot, featuring a colorful ASCII art version of the U-Boot logo and a fancy layout.
Finally, tireless device porters can properly show off their hard work and get the internet points they so deserve!
Not everything is fully supported yet, but this seemed good enough for initial inclusion. Only one MMC device is detected, and other than SCSI other storage devices aren't supported.
Signed-off-by: Caleb Connolly caleb.connolly@linaro.org
Ephemeral demo image: https://0x0.st/XVUa.png
cmd/Kconfig | 7 ++ cmd/Makefile | 1 + cmd/ufetch.c | 201 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 209 insertions(+) create mode 100644 cmd/ufetch.c
diff --git a/cmd/Kconfig b/cmd/Kconfig index 978f44eda426..70acb5727b04 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -175,8 +175,15 @@ config CMD_CPU number of CPUs, type (e.g. manufacturer, architecture, product or internal name) and clock frequency. Other information may be available depending on the CPU driver.
+config CMD_UFETCH
- bool "U-Boot fetch"
- depends on BLK
- help
Fetch utility for U-Boot (akin to neofetch). Prints informationabout U-Boot and the board it is running on in a pleasing format.- config CMD_FWU_METADATA bool "fwu metadata read" depends on FWU_MULTI_BANK_UPDATE help
diff --git a/cmd/Makefile b/cmd/Makefile index 87133cc27a8a..ffb04c8f2e0a 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -53,8 +53,9 @@ obj-$(CONFIG_CMD_CONSOLE) += console.o obj-$(CONFIG_CMD_CPU) += cpu.o obj-$(CONFIG_CMD_DATE) += date.o obj-$(CONFIG_CMD_DEMO) += demo.o obj-$(CONFIG_CMD_DM) += dm.o +obj-$(CONFIG_CMD_UFETCH) += ufetch.o obj-$(CONFIG_CMD_SOUND) += sound.o ifdef CONFIG_POST obj-$(CONFIG_CMD_DIAG) += diag.o endif diff --git a/cmd/ufetch.c b/cmd/ufetch.c new file mode 100644 index 000000000000..f7374eb2e364 --- /dev/null +++ b/cmd/ufetch.c @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0
+/* Small "fetch" utility for U-Boot */
+#include <mmc.h> +#include <time.h> +#include <asm/global_data.h> +#include <cli.h> +#include <command.h> +#include <dm/ofnode.h> +#include <env.h> +#include <rand.h> +#include <vsprintf.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <version.h>
+DECLARE_GLOBAL_DATA_PTR;
+#define LINE_WIDTH 40 +#define BLUE "\033[38;5;4m" +#define YELLOW "\033[38;5;11m" +#define BOLD "\033[1m" +#define RESET "\033[0m" +static const char *logo_lines[] = {
- BLUE BOLD " ......::...... ",
- BLUE BOLD " ...::::::::::::::::::... ",
- BLUE BOLD " ..::::::::::::::::::::::::::.. ",
- BLUE BOLD " .::::.:::::::::::::::...::::.::::. ",
- BLUE BOLD " .::::::::::::::::::::..::::::::::::::. ",
- BLUE BOLD " .::.:::::::::::::::::::" YELLOW "=*%#*" BLUE "::::::::::.::. ",
- BLUE BOLD " .:::::::::::::::::....." YELLOW "*%%*-" BLUE ":....::::::::::. ",
- BLUE BOLD " .:.:::...:::::::::.:-" YELLOW "===##*---==-" BLUE "::::::::::.:. ",
- BLUE BOLD " .::::..::::........" YELLOW "-***#****###****-" BLUE "...::::::.:. ",
- BLUE BOLD " ::.:.-" YELLOW "+***+=" BLUE "::-" YELLOW "=+**#%%%%%%%%%%%%###*= " BLUE "-::...::::. ",
- BLUE BOLD ".:.::-" YELLOW "*****###%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE ":..:::: ",
- BLUE BOLD ".::" YELLOW "##" BLUE ":" YELLOW "***#%%%%%%#####%%%%%%%####%%%%%####%%%*" BLUE "-.::. ",
- BLUE BOLD ":.:" YELLOW "#%" BLUE "::" YELLOW "*%%%%%%%#*****##%%%#*****##%%##*****#%%+" BLUE ".::.",
- BLUE BOLD ".::" YELLOW "**==#%%%%%%%##****#%%%%##****#%%%%#****###%%" BLUE ":.. ",
- BLUE BOLD "..:" YELLOW "#%" BLUE "::" YELLOW "*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%#%%%%%+ " BLUE ".:.",
- BLUE BOLD " ::" YELLOW "##" BLUE ":" YELLOW "+**#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%* " BLUE "-.:: ",
- BLUE BOLD " ..::-" YELLOW "#****#%#%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE "-..::. ",
- BLUE BOLD " ...:=" YELLOW "*****=" BLUE "::-\033[38;5;7m=+**###%%%%%%%%###**+= " BLUE "--:...::: ",
- BLUE BOLD " .::.::--:........::::::--::::::......::::::. ",
- BLUE BOLD " .::.....::::::::::...........:::::::::.::. ",
- BLUE BOLD " .::::::::::::::::::::::::::::::::::::. ",
- BLUE BOLD " .::::.::::::::::::::::::::::.::::. ",
- BLUE BOLD " ..::::::::::::::::::::::::::.. ",
- BLUE BOLD " ...::::::::::::::::::... ",
- BLUE BOLD " ......::...... ",
+};
+enum output_lines {
- FIRST,
- SECOND,
- KERNEL,
- SYSINFO,
- HOST,
- UPTIME,
- IP,
- CMDS,
- CONSOLES,
- DEVICES,
- FEATURES,
- RELOCATION,
- CORES,
- MEMORY,
- STORAGE,
- /* Up to 10 storage devices... Should be enough for anyone right? */
- _LAST_LINE = (STORAGE + 10),
+#define LAST_LINE (_LAST_LINE - 1UL) +};
+static int do_ufetch(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])+{
- int num_lines = max(LAST_LINE + 1, ARRAY_SIZE(logo_lines));
- const char *model, *compatible;
- char *ipaddr;
- int n_cmds, n_cpus = 0, ret, compatlen;
- ofnode np;
- struct mmc *mmc;
- struct blk_desc *scsi_desc;
- bool skip_ascii = false;
- if (argc > 1 && strcmp(argv[1], "-n") == 0) {
skip_ascii = true;num_lines = LAST_LINE;- }
- for (int i = 0; i < num_lines; i++) {
if (!skip_ascii) {if (i < ARRAY_SIZE(logo_lines))printf("%s ", logo_lines[i]);elseprintf("%*c ", LINE_WIDTH, ' ');}switch (i) {case FIRST:compatible = ofnode_read_string(ofnode_root(), "compatible");if (!compatible)compatible = "unknown";printf(RESET "%s\n", compatible);compatlen = strlen(compatible);break;case SECOND:for (int j = 0; j < compatlen; j++)putc('-');putc('\n');break;case KERNEL:printf("Kernel:" RESET " %s\n", U_BOOT_VERSION);break;case SYSINFO:printf("Config:" RESET " %s_defconfig\n", CONFIG_SYS_CONFIG_NAME);break;case HOST:model = ofnode_read_string(ofnode_root(), "model");if (model)printf("Host:" RESET " %s\n", model);break;case UPTIME:printf("Uptime:" RESET " %ld seconds\n", get_timer(0) / 1000);break;case IP:ipaddr = env_get("ipvaddr");
ipaddr here.
if (!ipaddr)ipaddr = "none";printf("IP Address:" RESET " %s", ipaddr);ipaddr = env_get("ipv6addr");if (ipaddr)printf(", %s\n", ipaddr);elseputc('\n');break;case CMDS:n_cmds = ll_entry_count(struct cmd_tbl, cmd);printf("Commands:" RESET " %d (help)\n", n_cmds);break;case CONSOLES:printf("Consoles:" RESET " %s (%d baud)\n", env_get("stdout"),gd->baudrate);break;case DEVICES:printf("Devices:" RESET " ");/* TODO: walk the DM tree */printf("Uncountable!\n");break;case FEATURES:printf("Features:" RESET " ");if (IS_ENABLED(CONFIG_NET))printf("Net");if (IS_ENABLED(CONFIG_EFI_LOADER))printf(", EFI");printf("\n");break;case RELOCATION:if (gd->flags & GD_FLG_SKIP_RELOC)printf("Relocated:" RESET " no\n");elseprintf("Relocated:" RESET " to %#09lx\n", gd->relocaddr);break;case CORES:ofnode_for_each_subnode(np, ofnode_path("/cpus")) {if (ofnode_name_eq(np, "cpu"))n_cpus++;}printf("CPU:" RESET " %d (1 in use)\n", n_cpus);break;case MEMORY:printf("Memory:" RESET " %lu MB\n", (ulong)gd->ram_size >> 20);
This is kind of shortcut (and nothing wrong on it)
In my case I see 2GB here but board has 4GB which is properly shown via show_dram_config() as
DRAM: 2 GiB (effective 4 GiB)
Maybe you can simply call this function to get the same information. Also I see that there is board_add_ram_info() called which can provide more information.
Thanks, Michal
Am 8. August 2024 18:24:24 MESZ schrieb Caleb Connolly caleb.connolly@linaro.org:
While U-Boot does a pretty good job at printing information at startup about what hardware it's running on, it can be hard to take pretty pictures of this to show off on the internet (by far the most important aspect of porting a device in 2024!).
Add a small utility "ufetch" for displaying some information about U-Boot and the hardware it's running on in a similar fashion to the popular neofetch tool for *nix's [1].
While the output is meant to be useful, it should also be pleasing to look at and look good in screenshots. The ufetch command brings this to U-Boot, featuring a colorful ASCII art version of the U-Boot logo and a fancy layout.
Finally, tireless device porters can properly show off their hard work and get the internet points they so deserve!
Not everything is fully supported yet, but this seemed good enough for initial inclusion. Only one MMC device is detected, and other than SCSI other storage devices aren't supported.
This command is not very generic. E.g. it supports SCSI drives but not SATA. Many boards have eMMC and SD-card. This lks more ike an RFC tan something ready to merge.
Why don't you use a script or an EFI program to print whatever information you need?
Signed-off-by: Caleb Connolly caleb.connolly@linaro.org
Ephemeral demo image: https://0x0.st/XVUa.png
cmd/Kconfig | 7 ++ cmd/Makefile | 1 + cmd/ufetch.c | 201 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 209 insertions(+) create mode 100644 cmd/ufetch.c
diff --git a/cmd/Kconfig b/cmd/Kconfig index 978f44eda426..70acb5727b04 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -175,8 +175,15 @@ config CMD_CPU number of CPUs, type (e.g. manufacturer, architecture, product or internal name) and clock frequency. Other information may be available depending on the CPU driver.
+config CMD_UFETCH
- bool "U-Boot fetch"
- depends on BLK
- help
Fetch utility for U-Boot (akin to neofetch). Prints informationabout U-Boot and the board it is running on in a pleasing format.config CMD_FWU_METADATA bool "fwu metadata read" depends on FWU_MULTI_BANK_UPDATE help diff --git a/cmd/Makefile b/cmd/Makefile index 87133cc27a8a..ffb04c8f2e0a 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -53,8 +53,9 @@ obj-$(CONFIG_CMD_CONSOLE) += console.o obj-$(CONFIG_CMD_CPU) += cpu.o obj-$(CONFIG_CMD_DATE) += date.o obj-$(CONFIG_CMD_DEMO) += demo.o obj-$(CONFIG_CMD_DM) += dm.o +obj-$(CONFIG_CMD_UFETCH) += ufetch.o obj-$(CONFIG_CMD_SOUND) += sound.o ifdef CONFIG_POST obj-$(CONFIG_CMD_DIAG) += diag.o endif diff --git a/cmd/ufetch.c b/cmd/ufetch.c new file mode 100644 index 000000000000..f7374eb2e364 --- /dev/null +++ b/cmd/ufetch.c @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0
+/* Small "fetch" utility for U-Boot */
+#include <mmc.h> +#include <time.h> +#include <asm/global_data.h> +#include <cli.h> +#include <command.h> +#include <dm/ofnode.h> +#include <env.h> +#include <rand.h> +#include <vsprintf.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <version.h>
+DECLARE_GLOBAL_DATA_PTR;
+#define LINE_WIDTH 40 +#define BLUE "\033[38;5;4m" +#define YELLOW "\033[38;5;11m" +#define BOLD "\033[1m" +#define RESET "\033[0m" +static const char *logo_lines[] = {
- BLUE BOLD " ......::...... ",
- BLUE BOLD " ...::::::::::::::::::... ",
- BLUE BOLD " ..::::::::::::::::::::::::::.. ",
- BLUE BOLD " .::::.:::::::::::::::...::::.::::. ",
- BLUE BOLD " .::::::::::::::::::::..::::::::::::::. ",
- BLUE BOLD " .::.:::::::::::::::::::" YELLOW "=*%#*" BLUE "::::::::::.::. ",
- BLUE BOLD " .:::::::::::::::::....." YELLOW "*%%*-" BLUE ":....::::::::::. ",
- BLUE BOLD " .:.:::...:::::::::.:-" YELLOW "===##*---==-" BLUE "::::::::::.:. ",
- BLUE BOLD " .::::..::::........" YELLOW "-***#****###****-" BLUE "...::::::.:. ",
- BLUE BOLD " ::.:.-" YELLOW "+***+=" BLUE "::-" YELLOW "=+**#%%%%%%%%%%%%###*= " BLUE "-::...::::. ",
- BLUE BOLD ".:.::-" YELLOW "*****###%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE ":..:::: ",
- BLUE BOLD ".::" YELLOW "##" BLUE ":" YELLOW "***#%%%%%%#####%%%%%%%####%%%%%####%%%*" BLUE "-.::. ",
- BLUE BOLD ":.:" YELLOW "#%" BLUE "::" YELLOW "*%%%%%%%#*****##%%%#*****##%%##*****#%%+" BLUE ".::.",
- BLUE BOLD ".::" YELLOW "**==#%%%%%%%##****#%%%%##****#%%%%#****###%%" BLUE ":.. ",
- BLUE BOLD "..:" YELLOW "#%" BLUE "::" YELLOW "*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%#%%%%%+ " BLUE ".:.",
- BLUE BOLD " ::" YELLOW "##" BLUE ":" YELLOW "+**#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%* " BLUE "-.:: ",
- BLUE BOLD " ..::-" YELLOW "#****#%#%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE "-..::. ",
- BLUE BOLD " ...:=" YELLOW "*****=" BLUE "::-\033[38;5;7m=+**###%%%%%%%%###**+= " BLUE "--:...::: ",
- BLUE BOLD " .::.::--:........::::::--::::::......::::::. ",
- BLUE BOLD " .::.....::::::::::...........:::::::::.::. ",
- BLUE BOLD " .::::::::::::::::::::::::::::::::::::. ",
- BLUE BOLD " .::::.::::::::::::::::::::::.::::. ",
- BLUE BOLD " ..::::::::::::::::::::::::::.. ",
- BLUE BOLD " ...::::::::::::::::::... ",
- BLUE BOLD " ......::...... ",
+};
+enum output_lines {
- FIRST,
- SECOND,
- KERNEL,
- SYSINFO,
- HOST,
- UPTIME,
- IP,
- CMDS,
- CONSOLES,
- DEVICES,
- FEATURES,
- RELOCATION,
- CORES,
- MEMORY,
- STORAGE,
- /* Up to 10 storage devices... Should be enough for anyone right? */
- _LAST_LINE = (STORAGE + 10),
+#define LAST_LINE (_LAST_LINE - 1UL) +};
+static int do_ufetch(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])+{
- int num_lines = max(LAST_LINE + 1, ARRAY_SIZE(logo_lines));
- const char *model, *compatible;
- char *ipaddr;
- int n_cmds, n_cpus = 0, ret, compatlen;
- ofnode np;
- struct mmc *mmc;
- struct blk_desc *scsi_desc;
- bool skip_ascii = false;
- if (argc > 1 && strcmp(argv[1], "-n") == 0) {
skip_ascii = true;num_lines = LAST_LINE;- }
- for (int i = 0; i < num_lines; i++) {
if (!skip_ascii) {if (i < ARRAY_SIZE(logo_lines))printf("%s ", logo_lines[i]);elseprintf("%*c ", LINE_WIDTH, ' ');}switch (i) {case FIRST:compatible = ofnode_read_string(ofnode_root(), "compatible");if (!compatible)compatible = "unknown";printf(RESET "%s\n", compatible);compatlen = strlen(compatible);break;case SECOND:for (int j = 0; j < compatlen; j++)putc('-');putc('\n');break;case KERNEL:
Please, do not use misleading variable names.
printf("Kernel:" RESET " %s\n", U_BOOT_VERSION);break;case SYSINFO:printf("Config:" RESET " %s_defconfig\n", CONFIG_SYS_CONFIG_NAME);break;case HOST:model = ofnode_read_string(ofnode_root(), "model");if (model)printf("Host:" RESET " %s\n", model);break;case UPTIME:printf("Uptime:" RESET " %ld seconds\n", get_timer(0) / 1000);break;case IP:ipaddr = env_get("ipvaddr");if (!ipaddr)ipaddr = "none";printf("IP Address:" RESET " %s", ipaddr);ipaddr = env_get("ipv6addr");if (ipaddr)printf(", %s\n", ipaddr);elseputc('\n');break;case CMDS:n_cmds = ll_entry_count(struct cmd_tbl, cmd);
Who cares if you have 50 commands or 51 if you don't know which?
printf("Commands:" RESET " %d (help)\n", n_cmds);break;case CONSOLES:printf("Consoles:" RESET " %s (%d baud)\n", env_get("stdout"),gd->baudrate);break;case DEVICES:printf("Devices:" RESET " ");/* TODO: walk the DM tree */printf("Uncountable!\n");
Nothing we should merge.
break;case FEATURES:printf("Features:" RESET " ");if (IS_ENABLED(CONFIG_NET))printf("Net");
Wouuldn't you want to know which devices where detected?
if (IS_ENABLED(CONFIG_EFI_LOADER))printf(", EFI");printf("\n");break;case RELOCATION:if (gd->flags & GD_FLG_SKIP_RELOC)printf("Relocated:" RESET " no\n");elseprintf("Relocated:" RESET " to %#09lx\n", gd->relocaddr);break;case CORES:ofnode_for_each_subnode(np, ofnode_path("/cpus")) {if (ofnode_name_eq(np, "cpu"))n_cpus++;}printf("CPU:" RESET " %d (1 in use)\n", n_cpus);break;case MEMORY:printf("Memory:" RESET " %lu MB\n", (ulong)gd->ram_size >> 20);break;case STORAGE:default:if (i == STORAGE && get_mmc_num() > 0) {mmc = find_mmc_device(0);if (mmc)printf("Storage:" RESET " mmc 0: %llu MB", mmc->capacity >> 20);
And if my eMMC is device 1 and SD card is 0?
Why wouldn't you iterate over all UCLASS_BLK devices?
Best regards
Heinrich
}if (i >= STORAGE + 1) {ret = blk_get_desc(UCLASS_SCSI, i - (STORAGE + 1), &scsi_desc);if (!ret && scsi_desc->type != DEV_TYPE_UNKNOWN)/* The calculation here is really lossy but close enough */printf("Storage:" RESET " scsi %d: %lu MB", i - (STORAGE + 1),((scsi_desc->lba >> 9) * scsi_desc->blksz) >> 11);}printf("\n");}- }
- printf(RESET "\n\n");
- return 0;
+}
+U_BOOT_CMD(ufetch, 2, 1, do_ufetch,
- "U-Boot fetch utility",
- "Print information about your device.\n"
- " -n Don't print the ASCII logo"
+);
On 09/08/2024 08:18, Heinrich Schuchardt wrote:
Am 8. August 2024 18:24:24 MESZ schrieb Caleb Connolly caleb.connolly@linaro.org:
While U-Boot does a pretty good job at printing information at startup about what hardware it's running on, it can be hard to take pretty pictures of this to show off on the internet (by far the most important aspect of porting a device in 2024!).
Add a small utility "ufetch" for displaying some information about U-Boot and the hardware it's running on in a similar fashion to the popular neofetch tool for *nix's [1].
While the output is meant to be useful, it should also be pleasing to look at and look good in screenshots. The ufetch command brings this to U-Boot, featuring a colorful ASCII art version of the U-Boot logo and a fancy layout.
Finally, tireless device porters can properly show off their hard work and get the internet points they so deserve!
Not everything is fully supported yet, but this seemed good enough for initial inclusion. Only one MMC device is detected, and other than SCSI other storage devices aren't supported.
This command is not very generic. E.g. it supports SCSI drives but not SATA. Many boards have eMMC and SD-card. This lks more ike an RFC tan something ready to merge.
Honestly it didn't even occur to me to send an RFC since this is purely a vanity thing...
I'll make it generic over UCLASS_BLK if possible for the next revision.
Why don't you use a script or an EFI program to print whatever information you need?
Well , then you'd need to have a way to load the script or EFI binary, which might not be possible for an early U-Boot port which doesn't have storage support yet (or at least, be a bunch of effort).
The only motivation to have this in U-Boot is really because
a) it's cute b) it motivates "reward oriented" people like myself to get U-Boot booting on new/interesting devices because now it can be really easily shown off.
Maybe it's a cynical take, but I think stuff like this really has the potential to get more folks interested. Nobody likes doing the invisible background work, so why not bring some visibility to things?
Assuming I did a bad job at conveying my intent in the patch description: the point here is not to convey useful debugging information to developers, it's to show off, look pretty, and be amusing. Plenty of other U-Boot commands can convey information, this one is more like the 2048 port.
Signed-off-by: Caleb Connolly caleb.connolly@linaro.org
Ephemeral demo image: https://0x0.st/XVUa.png
cmd/Kconfig | 7 ++ cmd/Makefile | 1 + cmd/ufetch.c | 201 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 209 insertions(+) create mode 100644 cmd/ufetch.c
diff --git a/cmd/Kconfig b/cmd/Kconfig index 978f44eda426..70acb5727b04 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -175,8 +175,15 @@ config CMD_CPU number of CPUs, type (e.g. manufacturer, architecture, product or internal name) and clock frequency. Other information may be available depending on the CPU driver.
+config CMD_UFETCH
- bool "U-Boot fetch"
- depends on BLK
- help
Fetch utility for U-Boot (akin to neofetch). Prints informationabout U-Boot and the board it is running on in a pleasing format.config CMD_FWU_METADATA bool "fwu metadata read" depends on FWU_MULTI_BANK_UPDATE help diff --git a/cmd/Makefile b/cmd/Makefile index 87133cc27a8a..ffb04c8f2e0a 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -53,8 +53,9 @@ obj-$(CONFIG_CMD_CONSOLE) += console.o obj-$(CONFIG_CMD_CPU) += cpu.o obj-$(CONFIG_CMD_DATE) += date.o obj-$(CONFIG_CMD_DEMO) += demo.o obj-$(CONFIG_CMD_DM) += dm.o +obj-$(CONFIG_CMD_UFETCH) += ufetch.o obj-$(CONFIG_CMD_SOUND) += sound.o ifdef CONFIG_POST obj-$(CONFIG_CMD_DIAG) += diag.o endif diff --git a/cmd/ufetch.c b/cmd/ufetch.c new file mode 100644 index 000000000000..f7374eb2e364 --- /dev/null +++ b/cmd/ufetch.c @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0
+/* Small "fetch" utility for U-Boot */
+#include <mmc.h> +#include <time.h> +#include <asm/global_data.h> +#include <cli.h> +#include <command.h> +#include <dm/ofnode.h> +#include <env.h> +#include <rand.h> +#include <vsprintf.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <version.h>
+DECLARE_GLOBAL_DATA_PTR;
+#define LINE_WIDTH 40 +#define BLUE "\033[38;5;4m" +#define YELLOW "\033[38;5;11m" +#define BOLD "\033[1m" +#define RESET "\033[0m" +static const char *logo_lines[] = {
- BLUE BOLD " ......::...... ",
- BLUE BOLD " ...::::::::::::::::::... ",
- BLUE BOLD " ..::::::::::::::::::::::::::.. ",
- BLUE BOLD " .::::.:::::::::::::::...::::.::::. ",
- BLUE BOLD " .::::::::::::::::::::..::::::::::::::. ",
- BLUE BOLD " .::.:::::::::::::::::::" YELLOW "=*%#*" BLUE "::::::::::.::. ",
- BLUE BOLD " .:::::::::::::::::....." YELLOW "*%%*-" BLUE ":....::::::::::. ",
- BLUE BOLD " .:.:::...:::::::::.:-" YELLOW "===##*---==-" BLUE "::::::::::.:. ",
- BLUE BOLD " .::::..::::........" YELLOW "-***#****###****-" BLUE "...::::::.:. ",
- BLUE BOLD " ::.:.-" YELLOW "+***+=" BLUE "::-" YELLOW "=+**#%%%%%%%%%%%%###*= " BLUE "-::...::::. ",
- BLUE BOLD ".:.::-" YELLOW "*****###%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE ":..:::: ",
- BLUE BOLD ".::" YELLOW "##" BLUE ":" YELLOW "***#%%%%%%#####%%%%%%%####%%%%%####%%%*" BLUE "-.::. ",
- BLUE BOLD ":.:" YELLOW "#%" BLUE "::" YELLOW "*%%%%%%%#*****##%%%#*****##%%##*****#%%+" BLUE ".::.",
- BLUE BOLD ".::" YELLOW "**==#%%%%%%%##****#%%%%##****#%%%%#****###%%" BLUE ":.. ",
- BLUE BOLD "..:" YELLOW "#%" BLUE "::" YELLOW "*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%#%%%%%+ " BLUE ".:.",
- BLUE BOLD " ::" YELLOW "##" BLUE ":" YELLOW "+**#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%* " BLUE "-.:: ",
- BLUE BOLD " ..::-" YELLOW "#****#%#%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE "-..::. ",
- BLUE BOLD " ...:=" YELLOW "*****=" BLUE "::-\033[38;5;7m=+**###%%%%%%%%###**+= " BLUE "--:...::: ",
- BLUE BOLD " .::.::--:........::::::--::::::......::::::. ",
- BLUE BOLD " .::.....::::::::::...........:::::::::.::. ",
- BLUE BOLD " .::::::::::::::::::::::::::::::::::::. ",
- BLUE BOLD " .::::.::::::::::::::::::::::.::::. ",
- BLUE BOLD " ..::::::::::::::::::::::::::.. ",
- BLUE BOLD " ...::::::::::::::::::... ",
- BLUE BOLD " ......::...... ",
+};
+enum output_lines {
- FIRST,
- SECOND,
- KERNEL,
- SYSINFO,
- HOST,
- UPTIME,
- IP,
- CMDS,
- CONSOLES,
- DEVICES,
- FEATURES,
- RELOCATION,
- CORES,
- MEMORY,
- STORAGE,
- /* Up to 10 storage devices... Should be enough for anyone right? */
- _LAST_LINE = (STORAGE + 10),
+#define LAST_LINE (_LAST_LINE - 1UL) +};
+static int do_ufetch(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])+{
- int num_lines = max(LAST_LINE + 1, ARRAY_SIZE(logo_lines));
- const char *model, *compatible;
- char *ipaddr;
- int n_cmds, n_cpus = 0, ret, compatlen;
- ofnode np;
- struct mmc *mmc;
- struct blk_desc *scsi_desc;
- bool skip_ascii = false;
- if (argc > 1 && strcmp(argv[1], "-n") == 0) {
skip_ascii = true;num_lines = LAST_LINE;- }
- for (int i = 0; i < num_lines; i++) {
if (!skip_ascii) {if (i < ARRAY_SIZE(logo_lines))printf("%s ", logo_lines[i]);elseprintf("%*c ", LINE_WIDTH, ' ');}switch (i) {case FIRST:compatible = ofnode_read_string(ofnode_root(), "compatible");if (!compatible)compatible = "unknown";printf(RESET "%s\n", compatible);compatlen = strlen(compatible);break;case SECOND:for (int j = 0; j < compatlen; j++)putc('-');putc('\n');break;case KERNEL:Please, do not use misleading variable names.
it is meant to be a little satirical, but I get it.
printf("Kernel:" RESET " %s\n", U_BOOT_VERSION);break;case SYSINFO:printf("Config:" RESET " %s_defconfig\n", CONFIG_SYS_CONFIG_NAME);break;case HOST:model = ofnode_read_string(ofnode_root(), "model");if (model)printf("Host:" RESET " %s\n", model);break;case UPTIME:printf("Uptime:" RESET " %ld seconds\n", get_timer(0) / 1000);break;case IP:ipaddr = env_get("ipvaddr");if (!ipaddr)ipaddr = "none";printf("IP Address:" RESET " %s", ipaddr);ipaddr = env_get("ipv6addr");if (ipaddr)printf(", %s\n", ipaddr);elseputc('\n');break;case CMDS:n_cmds = ll_entry_count(struct cmd_tbl, cmd);Who cares if you have 50 commands or 51 if you don't know which?
This is a play on the neofetch "packages" counter.
printf("Commands:" RESET " %d (help)\n", n_cmds);break;case CONSOLES:printf("Consoles:" RESET " %s (%d baud)\n", env_get("stdout"),gd->baudrate);break;case DEVICES:printf("Devices:" RESET " ");/* TODO: walk the DM tree */printf("Uncountable!\n");Nothing we should merge.
break;case FEATURES:printf("Features:" RESET " ");if (IS_ENABLED(CONFIG_NET))printf("Net");Wouuldn't you want to know which devices where detected?
if (IS_ENABLED(CONFIG_EFI_LOADER))printf(", EFI");printf("\n");break;case RELOCATION:if (gd->flags & GD_FLG_SKIP_RELOC)printf("Relocated:" RESET " no\n");elseprintf("Relocated:" RESET " to %#09lx\n", gd->relocaddr);break;case CORES:ofnode_for_each_subnode(np, ofnode_path("/cpus")) {if (ofnode_name_eq(np, "cpu"))n_cpus++;}printf("CPU:" RESET " %d (1 in use)\n", n_cpus);break;case MEMORY:printf("Memory:" RESET " %lu MB\n", (ulong)gd->ram_size >> 20);break;case STORAGE:default:if (i == STORAGE && get_mmc_num() > 0) {mmc = find_mmc_device(0);if (mmc)printf("Storage:" RESET " mmc 0: %llu MB", mmc->capacity >> 20);And if my eMMC is device 1 and SD card is 0?
Why wouldn't you iterate over all UCLASS_BLK devices?
Best regards
Heinrich
}if (i >= STORAGE + 1) {ret = blk_get_desc(UCLASS_SCSI, i - (STORAGE + 1), &scsi_desc);if (!ret && scsi_desc->type != DEV_TYPE_UNKNOWN)/* The calculation here is really lossy but close enough */printf("Storage:" RESET " scsi %d: %lu MB", i - (STORAGE + 1),((scsi_desc->lba >> 9) * scsi_desc->blksz) >> 11);}printf("\n");}- }
- printf(RESET "\n\n");
- return 0;
+}
+U_BOOT_CMD(ufetch, 2, 1, do_ufetch,
- "U-Boot fetch utility",
- "Print information about your device.\n"
- " -n Don't print the ASCII logo"
+);
On Fri, Aug 09, 2024 at 07:23:42PM +0200, Caleb Connolly wrote:
On 09/08/2024 08:18, Heinrich Schuchardt wrote:
Am 8. August 2024 18:24:24 MESZ schrieb Caleb Connolly caleb.connolly@linaro.org:
While U-Boot does a pretty good job at printing information at startup about what hardware it's running on, it can be hard to take pretty pictures of this to show off on the internet (by far the most important aspect of porting a device in 2024!).
Add a small utility "ufetch" for displaying some information about U-Boot and the hardware it's running on in a similar fashion to the popular neofetch tool for *nix's [1].
While the output is meant to be useful, it should also be pleasing to look at and look good in screenshots. The ufetch command brings this to U-Boot, featuring a colorful ASCII art version of the U-Boot logo and a fancy layout.
Finally, tireless device porters can properly show off their hard work and get the internet points they so deserve!
Not everything is fully supported yet, but this seemed good enough for initial inclusion. Only one MMC device is detected, and other than SCSI other storage devices aren't supported.
This command is not very generic. E.g. it supports SCSI drives but not SATA. Many boards have eMMC and SD-card. This lks more ike an RFC tan something ready to merge.
Honestly it didn't even occur to me to send an RFC since this is purely a vanity thing...
I'll make it generic over UCLASS_BLK if possible for the next revision.
Why don't you use a script or an EFI program to print whatever information you need?
Well , then you'd need to have a way to load the script or EFI binary, which might not be possible for an early U-Boot port which doesn't have storage support yet (or at least, be a bunch of effort).
The only motivation to have this in U-Boot is really because
a) it's cute b) it motivates "reward oriented" people like myself to get U-Boot booting on new/interesting devices because now it can be really easily shown off.
Maybe it's a cynical take, but I think stuff like this really has the potential to get more folks interested. Nobody likes doing the invisible background work, so why not bring some visibility to things?
Assuming I did a bad job at conveying my intent in the patch description: the point here is not to convey useful debugging information to developers, it's to show off, look pretty, and be amusing. Plenty of other U-Boot commands can convey information, this one is more like the 2048 port.
So, at the high level, yes, this is something that ought to get merged as it's handy enough, but not intended to replace for example smbios information.
Hi Tom,
On Fri, Aug 9, 2024 at 3:41 PM Tom Rini trini@konsulko.com wrote:
On Fri, Aug 09, 2024 at 07:23:42PM +0200, Caleb Connolly wrote:
On 09/08/2024 08:18, Heinrich Schuchardt wrote:
Am 8. August 2024 18:24:24 MESZ schrieb Caleb Connolly caleb.connolly@linaro.org:
While U-Boot does a pretty good job at printing information at startup about what hardware it's running on, it can be hard to take pretty pictures of this to show off on the internet (by far the most important aspect of porting a device in 2024!).
Add a small utility "ufetch" for displaying some information about U-Boot and the hardware it's running on in a similar fashion to the popular neofetch tool for *nix's [1].
While the output is meant to be useful, it should also be pleasing to look at and look good in screenshots. The ufetch command brings this to U-Boot, featuring a colorful ASCII art version of the U-Boot logo and a fancy layout.
Finally, tireless device porters can properly show off their hard work and get the internet points they so deserve!
Not everything is fully supported yet, but this seemed good enough for initial inclusion. Only one MMC device is detected, and other than SCSI other storage devices aren't supported.
This command is not very generic. E.g. it supports SCSI drives but not SATA. Many boards have eMMC and SD-card. This lks more ike an RFC tan something ready to merge.
Honestly it didn't even occur to me to send an RFC since this is purely a vanity thing...
I'll make it generic over UCLASS_BLK if possible for the next revision.
Why don't you use a script or an EFI program to print whatever information you need?
Well , then you'd need to have a way to load the script or EFI binary, which might not be possible for an early U-Boot port which doesn't have storage support yet (or at least, be a bunch of effort).
The only motivation to have this in U-Boot is really because
a) it's cute b) it motivates "reward oriented" people like myself to get U-Boot booting on new/interesting devices because now it can be really easily shown off.
Maybe it's a cynical take, but I think stuff like this really has the potential to get more folks interested. Nobody likes doing the invisible background work, so why not bring some visibility to things?
Assuming I did a bad job at conveying my intent in the patch description: the point here is not to convey useful debugging information to developers, it's to show off, look pretty, and be amusing. Plenty of other U-Boot commands can convey information, this one is more like the 2048 port.
So, at the high level, yes, this is something that ought to get merged as it's handy enough, but not intended to replace for example smbios information.
Up vote for this patch. Can we merge this to next?
All the best, Tony
-- Tom
On Tue, Nov 12, 2024 at 04:40:44PM -0800, Tony Dinh wrote:
Hi Tom,
On Fri, Aug 9, 2024 at 3:41 PM Tom Rini trini@konsulko.com wrote:
On Fri, Aug 09, 2024 at 07:23:42PM +0200, Caleb Connolly wrote:
On 09/08/2024 08:18, Heinrich Schuchardt wrote:
Am 8. August 2024 18:24:24 MESZ schrieb Caleb Connolly caleb.connolly@linaro.org:
While U-Boot does a pretty good job at printing information at startup about what hardware it's running on, it can be hard to take pretty pictures of this to show off on the internet (by far the most important aspect of porting a device in 2024!).
Add a small utility "ufetch" for displaying some information about U-Boot and the hardware it's running on in a similar fashion to the popular neofetch tool for *nix's [1].
While the output is meant to be useful, it should also be pleasing to look at and look good in screenshots. The ufetch command brings this to U-Boot, featuring a colorful ASCII art version of the U-Boot logo and a fancy layout.
Finally, tireless device porters can properly show off their hard work and get the internet points they so deserve!
Not everything is fully supported yet, but this seemed good enough for initial inclusion. Only one MMC device is detected, and other than SCSI other storage devices aren't supported.
This command is not very generic. E.g. it supports SCSI drives but not SATA. Many boards have eMMC and SD-card. This lks more ike an RFC tan something ready to merge.
Honestly it didn't even occur to me to send an RFC since this is purely a vanity thing...
I'll make it generic over UCLASS_BLK if possible for the next revision.
Why don't you use a script or an EFI program to print whatever information you need?
Well , then you'd need to have a way to load the script or EFI binary, which might not be possible for an early U-Boot port which doesn't have storage support yet (or at least, be a bunch of effort).
The only motivation to have this in U-Boot is really because
a) it's cute b) it motivates "reward oriented" people like myself to get U-Boot booting on new/interesting devices because now it can be really easily shown off.
Maybe it's a cynical take, but I think stuff like this really has the potential to get more folks interested. Nobody likes doing the invisible background work, so why not bring some visibility to things?
Assuming I did a bad job at conveying my intent in the patch description: the point here is not to convey useful debugging information to developers, it's to show off, look pretty, and be amusing. Plenty of other U-Boot commands can convey information, this one is more like the 2048 port.
So, at the high level, yes, this is something that ought to get merged as it's handy enough, but not intended to replace for example smbios information.
Up vote for this patch. Can we merge this to next?
I think I was expecting another iteration from Caleb based on some minor feedback?
participants (6)
-
Caleb Connolly -
Heinrich Schuchardt -
Michal Simek -
Simon Glass -
Tom Rini -
Tony Dinh