[U-Boot] [PATCH 1/2] arm64: versal: Enable i2c cadence controller and i2c command
Enable communication over i2c.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
configs/xilinx_versal_virt_defconfig | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index e1797db9821b..3f26163913b7 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_BOOTMENU=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_DHCP=y @@ -42,6 +43,8 @@ CONFIG_OF_BOARD=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_DM_SPI_FLASH=y
It is useful to have this command enable to see which devices are bind/probed.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
configs/xilinx_versal_virt_defconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index 3f26163913b7..57e497c922f8 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -19,6 +19,7 @@ CONFIG_SYS_PROMPT="Versal> " CONFIG_CMD_BOOTMENU=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y
participants (1)
-
Michal Simek