[PATCH v2 1/2] mx7ulp: Remove duplicated definitions

These PMC0 definitions are already defined in the beginning of the file, so remove the duplication.
Reported-by: Stefano Babic sbabic@denx.de Signed-off-by: Fabio Estevam festevam@gmail.com --- Changes since v1: - Newly introduced in this version.
arch/arm/mach-imx/mx7ulp/soc.c | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c index 46484813d2..d8d691692c 100644 --- a/arch/arm/mach-imx/mx7ulp/soc.c +++ b/arch/arm/mach-imx/mx7ulp/soc.c @@ -193,10 +193,6 @@ const char *get_imx_type(u32 imxtype) return "7ULP"; }
-#define PMC0_BASE_ADDR 0x410a1000 -#define PMC0_CTRL 0x28 -#define PMC0_CTRL_LDOEN BIT(31) - static bool ldo_mode_is_enabled(void) { unsigned int reg;

LDO mode may be already enabled by the ROM and enabling it again can cause U-Boot to hang.
Avoid this problem by only enabling LDO mode if it is initially disabled.
Reported-by: Jorge Ramirez-Ortiz jorge@foundries.io Signed-off-by: Fabio Estevam festevam@gmail.com Tested-by: Jorge Ramirez-Ortiz jorge@foundries.io --- Changes since v1: - Drop the define changes as they are duplicated (Stefano).
arch/arm/mach-imx/mx7ulp/soc.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c index d8d691692c..0d39dab7ea 100644 --- a/arch/arm/mach-imx/mx7ulp/soc.c +++ b/arch/arm/mach-imx/mx7ulp/soc.c @@ -118,12 +118,26 @@ void init_wdog(void) disable_wdog(WDG2_RBASE); }
+static bool ldo_mode_is_enabled(void) +{ + unsigned int reg; + + reg = readl(PMC0_BASE_ADDR + PMC0_CTRL); + if (reg & PMC0_CTRL_LDOEN) + return true; + else + return false; +} + #if !defined(CONFIG_SPL) || (defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD)) #if defined(CONFIG_LDO_ENABLED_MODE) static void init_ldo_mode(void) { unsigned int reg;
+ if (ldo_mode_is_enabled()) + return; + /* Set LDOOKDIS */ setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL, PMC0_CTRL_LDOOKDIS);
@@ -193,17 +207,6 @@ const char *get_imx_type(u32 imxtype) return "7ULP"; }
-static bool ldo_mode_is_enabled(void) -{ - unsigned int reg; - - reg = readl(PMC0_BASE_ADDR + PMC0_CTRL); - if (reg & PMC0_CTRL_LDOEN) - return true; - else - return false; -} - int print_cpuinfo(void) { u32 cpurev;

Subject: [PATCH v2 2/2] mx7ulp: Only enable LDO if it is not already enabled
LDO mode may be already enabled by the ROM and enabling it again can cause U-Boot to hang.
Avoid this problem by only enabling LDO mode if it is initially disabled.
Reported-by: Jorge Ramirez-Ortiz jorge@foundries.io Signed-off-by: Fabio Estevam festevam@gmail.com Tested-by: Jorge Ramirez-Ortiz jorge@foundries.io
Reviewed-by: Peng Fan peng.fan@nxp.com
Just have a question, LDO mode enabled by ROM, this is configured with fuse?
Is there any special configuration need to be done in Linux? I not touch this part before (:
Thanks, Peng.
Changes since v1:
- Drop the define changes as they are duplicated (Stefano).
arch/arm/mach-imx/mx7ulp/soc.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c index d8d691692c..0d39dab7ea 100644 --- a/arch/arm/mach-imx/mx7ulp/soc.c +++ b/arch/arm/mach-imx/mx7ulp/soc.c @@ -118,12 +118,26 @@ void init_wdog(void) disable_wdog(WDG2_RBASE); }
+static bool ldo_mode_is_enabled(void) +{
- unsigned int reg;
- reg = readl(PMC0_BASE_ADDR + PMC0_CTRL);
- if (reg & PMC0_CTRL_LDOEN)
return true;
- else
return false;
+}
#if !defined(CONFIG_SPL) || (defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD)) #if defined(CONFIG_LDO_ENABLED_MODE) static void init_ldo_mode(void) { unsigned int reg;
- if (ldo_mode_is_enabled())
return;
- /* Set LDOOKDIS */ setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL,
PMC0_CTRL_LDOOKDIS);
@@ -193,17 +207,6 @@ const char *get_imx_type(u32 imxtype) return "7ULP"; }
-static bool ldo_mode_is_enabled(void) -{
- unsigned int reg;
- reg = readl(PMC0_BASE_ADDR + PMC0_CTRL);
- if (reg & PMC0_CTRL_LDOEN)
return true;
- else
return false;
-}
int print_cpuinfo(void) { u32 cpurev; -- 2.17.1

Hi Peng,
On Mon, Feb 3, 2020 at 9:07 AM Peng Fan peng.fan@nxp.com wrote:
Just have a question, LDO mode enabled by ROM, this is configured with fuse?
I looked at the fuse map and did not see a fuse that controls it.
Is there any special configuration need to be done in Linux? I not touch this part before (:
In LDO-enabled mode cpufreq needs to be disabled.
Please see: https://github.com/fabioestevam/linux-imx/commit/8d66e5aae5b32261c9e2757c384...
The reason is that in LDO-enabled mode only RUN mode at 500MHz is supported.
HSRUN at 720MHz is not supported in LDO-enabled mode, so ROM boots at 500MHz and kernel keeps always running at this frequency.
Regards,
Fabio Estevam
Thanks, Peng.
Changes since v1:
- Drop the define changes as they are duplicated (Stefano).
arch/arm/mach-imx/mx7ulp/soc.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c index d8d691692c..0d39dab7ea 100644 --- a/arch/arm/mach-imx/mx7ulp/soc.c +++ b/arch/arm/mach-imx/mx7ulp/soc.c @@ -118,12 +118,26 @@ void init_wdog(void) disable_wdog(WDG2_RBASE); }
+static bool ldo_mode_is_enabled(void) +{
unsigned int reg;
reg = readl(PMC0_BASE_ADDR + PMC0_CTRL);
if (reg & PMC0_CTRL_LDOEN)
return true;
else
return false;
+}
#if !defined(CONFIG_SPL) || (defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD)) #if defined(CONFIG_LDO_ENABLED_MODE) static void init_ldo_mode(void) { unsigned int reg;
if (ldo_mode_is_enabled())
return;
/* Set LDOOKDIS */ setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL,
PMC0_CTRL_LDOOKDIS);
@@ -193,17 +207,6 @@ const char *get_imx_type(u32 imxtype) return "7ULP"; }
-static bool ldo_mode_is_enabled(void) -{
unsigned int reg;
reg = readl(PMC0_BASE_ADDR + PMC0_CTRL);
if (reg & PMC0_CTRL_LDOEN)
return true;
else
return false;
-}
int print_cpuinfo(void) { u32 cpurev; -- 2.17.1

LDO mode may be already enabled by the ROM and enabling it again can cause U-Boot to hang. Avoid this problem by only enabling LDO mode if it is initially disabled. Reported-by: Jorge Ramirez-Ortiz jorge@foundries.io Signed-off-by: Fabio Estevam festevam@gmail.com Tested-by: Jorge Ramirez-Ortiz jorge@foundries.io Reviewed-by: Peng Fan peng.fan@nxp.com
Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic

Subject: [PATCH v2 1/2] mx7ulp: Remove duplicated definitions
These PMC0 definitions are already defined in the beginning of the file, so remove the duplication.
Reported-by: Stefano Babic sbabic@denx.de Signed-off-by: Fabio Estevam festevam@gmail.com
Reviewed-by: Peng Fan peng.fan@nxp.com
Changes since v1:
- Newly introduced in this version.
arch/arm/mach-imx/mx7ulp/soc.c | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c index 46484813d2..d8d691692c 100644 --- a/arch/arm/mach-imx/mx7ulp/soc.c +++ b/arch/arm/mach-imx/mx7ulp/soc.c @@ -193,10 +193,6 @@ const char *get_imx_type(u32 imxtype) return "7ULP"; }
-#define PMC0_BASE_ADDR 0x410a1000 -#define PMC0_CTRL 0x28 -#define PMC0_CTRL_LDOEN BIT(31)
static bool ldo_mode_is_enabled(void) { unsigned int reg; -- 2.17.1

These PMC0 definitions are already defined in the beginning of the file, so remove the duplication. Reported-by: Stefano Babic sbabic@denx.de Signed-off-by: Fabio Estevam festevam@gmail.com Reviewed-by: Peng Fan peng.fan@nxp.com
Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic
participants (3)
-
Fabio Estevam
-
Peng Fan
-
sbabic@denx.de