[PATCH 0/3] sunxi: remove CONFIG_MMC?_CD_PIN
Since the dawn of time we had CONFIG_MMC?_CD_PIN defines for each Allwinner board, which held the name for the respective MMC card detect GPIO. These days we don't use that in U-Boot proper anymore (and rely on DT for that, instead), so it's just for the SPL loading. However the card detect is actually not needed there: - We continue loading from the same boot media that the BootROM booted us from, so when we get to load from MMC, there is surely a card in the slot. - The BROM already spoiled all efforts by unconditionally accessing the MMC bus, regardless of any card presence or not. We can't do more harm by doing the same.
This series removes the code checking the CD pin, and also the definition from Kconfig and all defconfigs. On top there is a cleanup for the MMC driver, which explains the reason for still also implementing the legacy MMC interface.
Please have a look and test!
Thanks, Andre
Andre Przywara (3): sunxi: mmc: ignore card detect in SPL sunxi: mmc: group non-DM specific functions sunxi: remove CONFIG_MMC?_CD_PIN
arch/arm/mach-sunxi/Kconfig | 27 ---- configs/A10-OLinuXino-Lime_defconfig | 1 - configs/A10s-OLinuXino-M_defconfig | 2 - configs/A13-OLinuXinoM_defconfig | 1 - configs/A13-OLinuXino_defconfig | 1 - configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 - configs/A20-OLinuXino-Lime2_defconfig | 1 - configs/A20-OLinuXino-Lime_defconfig | 1 - configs/A20-OLinuXino_MICRO-eMMC_defconfig | 1 - configs/A20-OLinuXino_MICRO_defconfig | 2 - configs/A20-Olimex-SOM-EVB_defconfig | 2 - configs/A20-Olimex-SOM204-EVB-eMMC_defconfig | 1 - configs/A20-Olimex-SOM204-EVB_defconfig | 1 - configs/A33-OLinuXino_defconfig | 1 - configs/Ainol_AW1_defconfig | 1 - configs/Ampe_A76_defconfig | 1 - configs/Bananapi_M2_Ultra_defconfig | 1 - configs/Bananapi_m2m_defconfig | 1 - configs/Cubieboard2_defconfig | 1 - configs/Cubieboard4_defconfig | 1 - configs/Cubieboard_defconfig | 1 - configs/Cubietruck_defconfig | 1 - configs/Empire_electronix_d709_defconfig | 1 - configs/Empire_electronix_m712_defconfig | 1 - configs/Itead_Ibox_A20_defconfig | 1 - configs/Lamobo_R1_defconfig | 1 - configs/Mele_M3_defconfig | 1 - configs/Mele_M5_defconfig | 1 - configs/Merrii_A80_Optimus_defconfig | 1 - configs/Orangepi_mini_defconfig | 2 - configs/Sinlinx_SinA31s_defconfig | 1 - configs/Sinlinx_SinA33_defconfig | 1 - configs/Sunchip_CX-A99_defconfig | 1 - configs/UTOO_P66_defconfig | 1 - configs/Wobo_i5_defconfig | 1 - configs/Yones_Toptech_BD1078_defconfig | 2 - configs/Yones_Toptech_BS1078_V2_defconfig | 1 - configs/bananapi_m2_berry_defconfig | 1 - configs/bananapi_m2_zero_defconfig | 1 - configs/bananapi_m64_defconfig | 1 - configs/beelink_gs1_defconfig | 1 - configs/colorfly_e708_q1_defconfig | 1 - configs/difrnce_dit4350_defconfig | 1 - configs/dserve_dsrv9703c_defconfig | 1 - configs/gt90h_v4_defconfig | 1 - configs/iNet_3F_defconfig | 1 - configs/iNet_3W_defconfig | 1 - configs/iNet_D978_rev2_defconfig | 1 - configs/icnova-a20-swac_defconfig | 1 - configs/inet86dz_defconfig | 1 - configs/inet98v_rev2_defconfig | 1 - configs/inet_q972_defconfig | 1 - configs/nanopi_m1_plus_defconfig | 1 - configs/oceanic_5205_5inmfd_defconfig | 1 - configs/orangepi_3_defconfig | 1 - configs/orangepi_lite2_defconfig | 1 - configs/orangepi_one_plus_defconfig | 1 - configs/orangepi_zero2_defconfig | 1 - configs/orangepi_zero_plus2_defconfig | 1 - configs/orangepi_zero_plus2_h3_defconfig | 1 - configs/parrot_r16_defconfig | 1 - configs/pine64-lts_defconfig | 1 - configs/pine_h64_defconfig | 1 - configs/polaroid_mid2407pxe03_defconfig | 1 - configs/polaroid_mid2809pxe04_defconfig | 1 - configs/q8_a13_tablet_defconfig | 1 - configs/q8_a23_tablet_800x480_defconfig | 1 - configs/q8_a33_tablet_1024x600_defconfig | 1 - configs/q8_a33_tablet_800x480_defconfig | 1 - configs/sopine_baseboard_defconfig | 1 - configs/tanix_tx6_defconfig | 1 - drivers/mmc/sunxi_mmc.c | 152 ++++++++----------- 72 files changed, 62 insertions(+), 192 deletions(-)
The sunxi MMC code does not use the DM in the SPL, as we don't have a device tree available that early, also no space for it. This also means we cannot access the card-detect GPIO information from there, so we have Kconfig symbols called CONFIG_MMCx_CD_PIN, which each board has to define. This is a burden, also requires extra GPIO code in the SPL. As the SPL is the natural successor of the BootROM (from which we are loaded), we can actually ignore the CD pin completely, as this is what the BootROM does as well: CD GPIOs are board specific, but the BootROM is not, so accesses the MMC devices anyway.
Remove the card detect code from the non-DM implementation of the sunxi MMC driver, to get rid of this unneeded code.
Signed-off-by: Andre Przywara andre.przywara@arm.com --- drivers/mmc/sunxi_mmc.c | 37 ++----------------------------------- 1 file changed, 2 insertions(+), 35 deletions(-)
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 1bb7b6d0e9..b2f7e2d142 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -44,22 +44,10 @@ struct sunxi_mmc_priv { /* support 4 mmc hosts */ struct sunxi_mmc_priv mmc_host[4];
-static int sunxi_mmc_getcd_gpio(int sdc_no) -{ - switch (sdc_no) { - case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN); - case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN); - case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN); - case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN); - } - return -EINVAL; -} - static int mmc_resource_init(int sdc_no) { struct sunxi_mmc_priv *priv = &mmc_host[sdc_no]; struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - int cd_pin, ret = 0;
debug("init mmc %d resource\n", sdc_no);
@@ -90,16 +78,7 @@ static int mmc_resource_init(int sdc_no) } priv->mmc_no = sdc_no;
- cd_pin = sunxi_mmc_getcd_gpio(sdc_no); - if (cd_pin >= 0) { - ret = gpio_request(cd_pin, "mmc_cd"); - if (!ret) { - sunxi_gpio_set_pull(cd_pin, SUNXI_GPIO_PULL_UP); - ret = gpio_direction_input(cd_pin); - } - } - - return ret; + return 0; } #endif
@@ -523,23 +502,11 @@ static int sunxi_mmc_send_cmd_legacy(struct mmc *mmc, struct mmc_cmd *cmd, return sunxi_mmc_send_cmd_common(priv, mmc, cmd, data); }
-static int sunxi_mmc_getcd_legacy(struct mmc *mmc) -{ - struct sunxi_mmc_priv *priv = mmc->priv; - int cd_pin; - - cd_pin = sunxi_mmc_getcd_gpio(priv->mmc_no); - if (cd_pin < 0) - return 1; - - return !gpio_get_value(cd_pin); -} - +/* .get_cd is not needed by the SPL */ static const struct mmc_ops sunxi_mmc_ops = { .send_cmd = sunxi_mmc_send_cmd_legacy, .set_ios = sunxi_mmc_set_ios_legacy, .init = sunxi_mmc_core_init, - .getcd = sunxi_mmc_getcd_legacy, };
struct mmc *sunxi_mmc_init(int sdc_no)
Hi Andre,
Thanks for helping to get rid of sunxi_name_to_gpio().
On 7/13/22 11:21, Andre Przywara wrote:
The sunxi MMC code does not use the DM in the SPL, as we don't have a device tree available that early, also no space for it. This also means we cannot access the card-detect GPIO information from there, so we have Kconfig symbols called CONFIG_MMCx_CD_PIN, which each board has to define. This is a burden, also requires extra GPIO code in the SPL. As the SPL is the natural successor of the BootROM (from which we are loaded), we can actually ignore the CD pin completely, as this is what the BootROM does as well: CD GPIOs are board specific, but the BootROM is not, so accesses the MMC devices anyway.
The card detection logic is useless for an even simpler reason: because of our spl_boot_device() implementation, SPL only accesses the MMC interface where SPL itself was originally read from. Therefore, it must have a card inserted.
Remove the card detect code from the non-DM implementation of the sunxi MMC driver, to get rid of this unneeded code.
Signed-off-by: Andre Przywara andre.przywara@arm.com
drivers/mmc/sunxi_mmc.c | 37 ++----------------------------------- 1 file changed, 2 insertions(+), 35 deletions(-)
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 1bb7b6d0e9..b2f7e2d142 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -44,22 +44,10 @@ struct sunxi_mmc_priv { /* support 4 mmc hosts */ struct sunxi_mmc_priv mmc_host[4];
-static int sunxi_mmc_getcd_gpio(int sdc_no) -{
- switch (sdc_no) {
- case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN);
- case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN);
- case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN);
- case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN);
- }
- return -EINVAL;
-}
static int mmc_resource_init(int sdc_no) { struct sunxi_mmc_priv *priv = &mmc_host[sdc_no]; struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
int cd_pin, ret = 0;
debug("init mmc %d resource\n", sdc_no);
@@ -90,16 +78,7 @@ static int mmc_resource_init(int sdc_no) } priv->mmc_no = sdc_no;
- cd_pin = sunxi_mmc_getcd_gpio(sdc_no);
- if (cd_pin >= 0) {
ret = gpio_request(cd_pin, "mmc_cd");if (!ret) {sunxi_gpio_set_pull(cd_pin, SUNXI_GPIO_PULL_UP);ret = gpio_direction_input(cd_pin);}- }
- return ret;
- return 0;
} #endif
@@ -523,23 +502,11 @@ static int sunxi_mmc_send_cmd_legacy(struct mmc *mmc, struct mmc_cmd *cmd, return sunxi_mmc_send_cmd_common(priv, mmc, cmd, data); }
-static int sunxi_mmc_getcd_legacy(struct mmc *mmc) -{
- struct sunxi_mmc_priv *priv = mmc->priv;
- int cd_pin;
- cd_pin = sunxi_mmc_getcd_gpio(priv->mmc_no);
- if (cd_pin < 0)
return 1;- return !gpio_get_value(cd_pin);
-}
+/* .get_cd is not needed by the SPL */
nit: s/get_cd/getcd/
Reviewed-by: Samuel Holland samuel@sholland.org Tested-by: Samuel Holland samuel@sholland.org
static const struct mmc_ops sunxi_mmc_ops = { .send_cmd = sunxi_mmc_send_cmd_legacy, .set_ios = sunxi_mmc_set_ios_legacy, .init = sunxi_mmc_core_init,
- .getcd = sunxi_mmc_getcd_legacy,
};
struct mmc *sunxi_mmc_init(int sdc_no)
On Sun, 8 Jan 2023 15:00:29 -0600 Samuel Holland samuel@sholland.org wrote:
Hi Samuel,
Thanks for helping to get rid of sunxi_name_to_gpio().
many thanks for the review, that's much appreciated.
On 7/13/22 11:21, Andre Przywara wrote:
The sunxi MMC code does not use the DM in the SPL, as we don't have a device tree available that early, also no space for it. This also means we cannot access the card-detect GPIO information from there, so we have Kconfig symbols called CONFIG_MMCx_CD_PIN, which each board has to define. This is a burden, also requires extra GPIO code in the SPL. As the SPL is the natural successor of the BootROM (from which we are loaded), we can actually ignore the CD pin completely, as this is what the BootROM does as well: CD GPIOs are board specific, but the BootROM is not, so accesses the MMC devices anyway.
The card detection logic is useless for an even simpler reason: because of our spl_boot_device() implementation, SPL only accesses the MMC interface where SPL itself was originally read from. Therefore, it must have a card inserted.
Indeed, I thought I mentioned this as well, but didn't. I added a sentence to that effect to the commit message (and removed the underscore in the comment below).
Cheers, Andre
Remove the card detect code from the non-DM implementation of the sunxi MMC driver, to get rid of this unneeded code.
Signed-off-by: Andre Przywara andre.przywara@arm.com
drivers/mmc/sunxi_mmc.c | 37 ++----------------------------------- 1 file changed, 2 insertions(+), 35 deletions(-)
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 1bb7b6d0e9..b2f7e2d142 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -44,22 +44,10 @@ struct sunxi_mmc_priv { /* support 4 mmc hosts */ struct sunxi_mmc_priv mmc_host[4];
-static int sunxi_mmc_getcd_gpio(int sdc_no) -{
- switch (sdc_no) {
- case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN);
- case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN);
- case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN);
- case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN);
- }
- return -EINVAL;
-}
static int mmc_resource_init(int sdc_no) { struct sunxi_mmc_priv *priv = &mmc_host[sdc_no]; struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
int cd_pin, ret = 0;
debug("init mmc %d resource\n", sdc_no);
@@ -90,16 +78,7 @@ static int mmc_resource_init(int sdc_no) } priv->mmc_no = sdc_no;
- cd_pin = sunxi_mmc_getcd_gpio(sdc_no);
- if (cd_pin >= 0) {
ret = gpio_request(cd_pin, "mmc_cd");if (!ret) {sunxi_gpio_set_pull(cd_pin, SUNXI_GPIO_PULL_UP);ret = gpio_direction_input(cd_pin);}- }
- return ret;
- return 0;
} #endif
@@ -523,23 +502,11 @@ static int sunxi_mmc_send_cmd_legacy(struct mmc *mmc, struct mmc_cmd *cmd, return sunxi_mmc_send_cmd_common(priv, mmc, cmd, data); }
-static int sunxi_mmc_getcd_legacy(struct mmc *mmc) -{
- struct sunxi_mmc_priv *priv = mmc->priv;
- int cd_pin;
- cd_pin = sunxi_mmc_getcd_gpio(priv->mmc_no);
- if (cd_pin < 0)
return 1;- return !gpio_get_value(cd_pin);
-}
+/* .get_cd is not needed by the SPL */
nit: s/get_cd/getcd/
Reviewed-by: Samuel Holland samuel@sholland.org Tested-by: Samuel Holland samuel@sholland.org
static const struct mmc_ops sunxi_mmc_ops = { .send_cmd = sunxi_mmc_send_cmd_legacy, .set_ios = sunxi_mmc_set_ios_legacy, .init = sunxi_mmc_core_init,
- .getcd = sunxi_mmc_getcd_legacy,
};
struct mmc *sunxi_mmc_init(int sdc_no)
As the SPL code for sunxi boards does not use the driver model, we have two mmc_ops structures, one for DM, one for non-DM. The actual hardware access code is shared, with the respective callback functions using that common code.
To make this more obvious and easier to read, reorder the functions to group them: we first have the common code, then the non-DM bits, and the proper DM implementation at the end. Also document this structure in the comment at the beginning of the file.
No functional change intended.
Signed-off-by: Andre Przywara andre.przywara@arm.com --- drivers/mmc/sunxi_mmc.c | 117 +++++++++++++++++++++------------------- 1 file changed, 61 insertions(+), 56 deletions(-)
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index b2f7e2d142..ad0fb4ad08 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -5,6 +5,12 @@ * Aaron leafy.myeh@allwinnertech.com * * MMC driver for allwinner sunxi platform. + * + * This driver is used by the (ARM) SPL with the legacy MMC interface, and + * by U-Boot proper using the full DM interface. The actual hardware access + * code is common, and comes first in this file. + * The legacy MMC interface implementation comes next, followed by the + * proper DM_MMC implementation at the end. */
#include <common.h> @@ -40,48 +46,6 @@ struct sunxi_mmc_priv { struct mmc_config cfg; };
-#if !CONFIG_IS_ENABLED(DM_MMC) -/* support 4 mmc hosts */ -struct sunxi_mmc_priv mmc_host[4]; - -static int mmc_resource_init(int sdc_no) -{ - struct sunxi_mmc_priv *priv = &mmc_host[sdc_no]; - struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - - debug("init mmc %d resource\n", sdc_no); - - switch (sdc_no) { - case 0: - priv->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE; - priv->mclkreg = &ccm->sd0_clk_cfg; - break; - case 1: - priv->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE; - priv->mclkreg = &ccm->sd1_clk_cfg; - break; -#ifdef SUNXI_MMC2_BASE - case 2: - priv->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE; - priv->mclkreg = &ccm->sd2_clk_cfg; - break; -#endif -#ifdef SUNXI_MMC3_BASE - case 3: - priv->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE; - priv->mclkreg = &ccm->sd3_clk_cfg; - break; -#endif - default: - printf("Wrong mmc number %d\n", sdc_no); - return -1; - } - priv->mmc_no = sdc_no; - - return 0; -} -#endif - /* * All A64 and later MMC controllers feature auto-calibration. This would * normally be detected via the compatible string, but we need something @@ -269,19 +233,6 @@ static int sunxi_mmc_set_ios_common(struct sunxi_mmc_priv *priv, return 0; }
-#if !CONFIG_IS_ENABLED(DM_MMC) -static int sunxi_mmc_core_init(struct mmc *mmc) -{ - struct sunxi_mmc_priv *priv = mmc->priv; - - /* Reset controller */ - writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl); - udelay(1000); - - return 0; -} -#endif - static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc, struct mmc_data *data) { @@ -486,7 +437,60 @@ out: return error; }
+/* non-DM code here is used by the (ARM) SPL only */ + #if !CONFIG_IS_ENABLED(DM_MMC) +/* support 4 mmc hosts */ +struct sunxi_mmc_priv mmc_host[4]; + +static int mmc_resource_init(int sdc_no) +{ + struct sunxi_mmc_priv *priv = &mmc_host[sdc_no]; + struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + debug("init mmc %d resource\n", sdc_no); + + switch (sdc_no) { + case 0: + priv->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE; + priv->mclkreg = &ccm->sd0_clk_cfg; + break; + case 1: + priv->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE; + priv->mclkreg = &ccm->sd1_clk_cfg; + break; +#ifdef SUNXI_MMC2_BASE + case 2: + priv->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE; + priv->mclkreg = &ccm->sd2_clk_cfg; + break; +#endif +#ifdef SUNXI_MMC3_BASE + case 3: + priv->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE; + priv->mclkreg = &ccm->sd3_clk_cfg; + break; +#endif + default: + printf("Wrong mmc number %d\n", sdc_no); + return -1; + } + priv->mmc_no = sdc_no; + + return 0; +} + +static int sunxi_mmc_core_init(struct mmc *mmc) +{ + struct sunxi_mmc_priv *priv = mmc->priv; + + /* Reset controller */ + writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl); + udelay(1000); + + return 0; +} + static int sunxi_mmc_set_ios_legacy(struct mmc *mmc) { struct sunxi_mmc_priv *priv = mmc->priv; @@ -562,7 +566,8 @@ struct mmc *sunxi_mmc_init(int sdc_no)
return mmc_create(cfg, priv); } -#else + +#else /* CONFIG_DM_MMC code below, as used by U-Boot proper */
static int sunxi_mmc_set_ios(struct udevice *dev) {
On 7/13/22 11:21, Andre Przywara wrote:
As the SPL code for sunxi boards does not use the driver model, we have two mmc_ops structures, one for DM, one for non-DM. The actual hardware access code is shared, with the respective callback functions using that common code.
To make this more obvious and easier to read, reorder the functions to group them: we first have the common code, then the non-DM bits, and the proper DM implementation at the end. Also document this structure in the comment at the beginning of the file.
No functional change intended.
Signed-off-by: Andre Przywara andre.przywara@arm.com
drivers/mmc/sunxi_mmc.c | 117 +++++++++++++++++++++------------------- 1 file changed, 61 insertions(+), 56 deletions(-)
Reviewed-by: Samuel Holland samuel@sholland.org Tested-by: Samuel Holland samuel@sholland.org
For legacy reasons we were defining the card detect GPIO for all sunxi boards in each board's defconfig. There is actually no need for a card-detect check in the SPL code (which consequently has been removed already), and also in U-Boot proper we have DM code to query the CD GPIO name from the device tree.
That means we don't have any user of that information left, so can remove the definitions from the defconfigs.
Signed-off-by: Andre Przywara andre.przywara@arm.com --- arch/arm/mach-sunxi/Kconfig | 27 -------------------- configs/A10-OLinuXino-Lime_defconfig | 1 - configs/A10s-OLinuXino-M_defconfig | 2 -- configs/A13-OLinuXinoM_defconfig | 1 - configs/A13-OLinuXino_defconfig | 1 - configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 - configs/A20-OLinuXino-Lime2_defconfig | 1 - configs/A20-OLinuXino-Lime_defconfig | 1 - configs/A20-OLinuXino_MICRO-eMMC_defconfig | 1 - configs/A20-OLinuXino_MICRO_defconfig | 2 -- configs/A20-Olimex-SOM-EVB_defconfig | 2 -- configs/A20-Olimex-SOM204-EVB-eMMC_defconfig | 1 - configs/A20-Olimex-SOM204-EVB_defconfig | 1 - configs/A33-OLinuXino_defconfig | 1 - configs/Ainol_AW1_defconfig | 1 - configs/Ampe_A76_defconfig | 1 - configs/Bananapi_M2_Ultra_defconfig | 1 - configs/Bananapi_m2m_defconfig | 1 - configs/Cubieboard2_defconfig | 1 - configs/Cubieboard4_defconfig | 1 - configs/Cubieboard_defconfig | 1 - configs/Cubietruck_defconfig | 1 - configs/Empire_electronix_d709_defconfig | 1 - configs/Empire_electronix_m712_defconfig | 1 - configs/Itead_Ibox_A20_defconfig | 1 - configs/Lamobo_R1_defconfig | 1 - configs/Mele_M3_defconfig | 1 - configs/Mele_M5_defconfig | 1 - configs/Merrii_A80_Optimus_defconfig | 1 - configs/Orangepi_mini_defconfig | 2 -- configs/Sinlinx_SinA31s_defconfig | 1 - configs/Sinlinx_SinA33_defconfig | 1 - configs/Sunchip_CX-A99_defconfig | 1 - configs/UTOO_P66_defconfig | 1 - configs/Wobo_i5_defconfig | 1 - configs/Yones_Toptech_BD1078_defconfig | 2 -- configs/Yones_Toptech_BS1078_V2_defconfig | 1 - configs/bananapi_m2_berry_defconfig | 1 - configs/bananapi_m2_zero_defconfig | 1 - configs/bananapi_m64_defconfig | 1 - configs/beelink_gs1_defconfig | 1 - configs/colorfly_e708_q1_defconfig | 1 - configs/difrnce_dit4350_defconfig | 1 - configs/dserve_dsrv9703c_defconfig | 1 - configs/gt90h_v4_defconfig | 1 - configs/iNet_3F_defconfig | 1 - configs/iNet_3W_defconfig | 1 - configs/iNet_D978_rev2_defconfig | 1 - configs/icnova-a20-swac_defconfig | 1 - configs/inet86dz_defconfig | 1 - configs/inet98v_rev2_defconfig | 1 - configs/inet_q972_defconfig | 1 - configs/nanopi_m1_plus_defconfig | 1 - configs/oceanic_5205_5inmfd_defconfig | 1 - configs/orangepi_3_defconfig | 1 - configs/orangepi_lite2_defconfig | 1 - configs/orangepi_one_plus_defconfig | 1 - configs/orangepi_zero2_defconfig | 1 - configs/orangepi_zero_plus2_defconfig | 1 - configs/orangepi_zero_plus2_h3_defconfig | 1 - configs/parrot_r16_defconfig | 1 - configs/pine64-lts_defconfig | 1 - configs/pine_h64_defconfig | 1 - configs/polaroid_mid2407pxe03_defconfig | 1 - configs/polaroid_mid2809pxe04_defconfig | 1 - configs/q8_a13_tablet_defconfig | 1 - configs/q8_a23_tablet_800x480_defconfig | 1 - configs/q8_a33_tablet_1024x600_defconfig | 1 - configs/q8_a33_tablet_800x480_defconfig | 1 - configs/sopine_baseboard_defconfig | 1 - configs/tanix_tx6_defconfig | 1 - 71 files changed, 102 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 71a7f8dcee..5378eed154 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -638,33 +638,6 @@ config MACPWR Set the pin used to power the MAC. This takes a string in the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
-config MMC0_CD_PIN - string "Card detect pin for mmc0" - default "PF6" if MACH_SUN8I_A83T || MACH_SUNXI_H3_H5 || MACH_SUN50I - default "" - ---help--- - Set the card detect pin for mmc0, leave empty to not use cd. This - takes a string in the format understood by sunxi_name_to_gpio, e.g. - PH1 for pin 1 of port H. - -config MMC1_CD_PIN - string "Card detect pin for mmc1" - default "" - ---help--- - See MMC0_CD_PIN help text. - -config MMC2_CD_PIN - string "Card detect pin for mmc2" - default "" - ---help--- - See MMC0_CD_PIN help text. - -config MMC3_CD_PIN - string "Card detect pin for mmc3" - default "" - ---help--- - See MMC0_CD_PIN help text. - config MMC1_PINS_PH bool "Pins for mmc1 are on Port H" depends on MACH_SUN4I || MACH_SUN7I || MACH_SUN8I_R40 diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 26a921279b..0b294707a7 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_EMR1=4 CONFIG_SYS_CLK_FREQ=912000000 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_I2C1_ENABLE=y CONFIG_SATAPWR="PC3" CONFIG_AHCI=y diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index 7e9b92ee5e..8c6c1afc16 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -4,8 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 -CONFIG_MMC0_CD_PIN="PG1" -CONFIG_MMC1_CD_PIN="PG13" CONFIG_MMC_SUNXI_SLOT_EXTRA=1 CONFIG_USB1_VBUS_PIN="PB10" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index 625a331e44..ed31d2b8bc 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=408 CONFIG_DRAM_EMR1=0 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB1_VBUS_PIN="PG11" # CONFIG_VIDEO_HDMI is not set CONFIG_VIDEO_VGA_VIA_LCD=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 5e0396c150..a79f98d620 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=408 CONFIG_DRAM_EMR1=0 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB1_VBUS_PIN="PG11" CONFIG_AXP_GPIO=y diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig index b5802818ec..d3627cc761 100644 --- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="PC17" CONFIG_USB0_VBUS_DET="PH5" diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index de4f6311f2..841edb46ba 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_USB0_VBUS_PIN="PC17" CONFIG_USB0_VBUS_DET="PH5" CONFIG_I2C1_ENABLE=y diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index ebb3a02b82..761e14d861 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_I2C1_ENABLE=y CONFIG_SATAPWR="PC3" CONFIG_AHCI=y diff --git a/configs/A20-OLinuXino_MICRO-eMMC_defconfig b/configs/A20-OLinuXino_MICRO-eMMC_defconfig index c8802435b4..cb350fe980 100644 --- a/configs/A20-OLinuXino_MICRO-eMMC_defconfig +++ b/configs/A20-OLinuXino_MICRO-eMMC_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro-emmc" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_I2C1_ENABLE=y CONFIG_VIDEO_VGA=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index f449641245..e3d675ff71 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -4,8 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" -CONFIG_MMC3_CD_PIN="PH11" CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_I2C1_ENABLE=y CONFIG_VIDEO_VGA=y diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig index 67b47f51f1..edaad3b4bd 100644 --- a/configs/A20-Olimex-SOM-EVB_defconfig +++ b/configs/A20-Olimex-SOM-EVB_defconfig @@ -4,8 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" -CONFIG_MMC3_CD_PIN="PH0" CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_USB0_VBUS_PIN="PB9" CONFIG_USB0_VBUS_DET="PH5" diff --git a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig index e02d67da5e..0312e40761 100644 --- a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig +++ b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som204-evb-emmc" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="PC17" CONFIG_USB0_VBUS_DET="PH5" diff --git a/configs/A20-Olimex-SOM204-EVB_defconfig b/configs/A20-Olimex-SOM204-EVB_defconfig index 317a1e695d..f5f4f66439 100644 --- a/configs/A20-Olimex-SOM204-EVB_defconfig +++ b/configs/A20-Olimex-SOM204-EVB_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som204-evb" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_USB0_VBUS_PIN="PC17" CONFIG_USB0_VBUS_DET="PH5" CONFIG_I2C1_ENABLE=y diff --git a/configs/A33-OLinuXino_defconfig b/configs/A33-OLinuXino_defconfig index c9eec1f887..7f17c2d7ac 100644 --- a/configs/A33-OLinuXino_defconfig +++ b/configs/A33-OLinuXino_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=15291 CONFIG_DRAM_ODT_EN=y -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PB3" diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig index 8cd38f7905..c25e7948dc 100644 --- a/configs/Ainol_AW1_defconfig +++ b/configs/Ainol_AW1_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=123 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_USB0_VBUS_PIN="PB9" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_AXP_GPIO=y diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig index 68707ed3e9..f58356f337 100644 --- a/configs/Ampe_A76_defconfig +++ b/configs/Ampe_A76_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_PIN="PG12" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB0_ID_DET="PG2" diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig index be5be9ae2f..5a462cd1be 100644 --- a/configs/Bananapi_M2_Ultra_defconfig +++ b/configs/Bananapi_M2_Ultra_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_R40=y CONFIG_DRAM_CLK=576 CONFIG_MACPWR="PA17" -CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PH23" CONFIG_USB2_VBUS_PIN="PH23" diff --git a/configs/Bananapi_m2m_defconfig b/configs/Bananapi_m2m_defconfig index 6a07f26c02..9d933a89fe 100644 --- a/configs/Bananapi_m2m_defconfig +++ b/configs/Bananapi_m2m_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=600 CONFIG_DRAM_ZQ=15291 CONFIG_DRAM_ODT_EN=y -CONFIG_MMC0_CD_PIN="PB4" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_ID_DET="PH8" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index 315c52f344..c1617b7031 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Cubieboard4_defconfig b/configs/Cubieboard4_defconfig index 928299e8a5..d947c52961 100644 --- a/configs/Cubieboard4_defconfig +++ b/configs/Cubieboard4_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-cubieboard4" CONFIG_SPL=y CONFIG_MACH_SUN9I=y CONFIG_DRAM_CLK=672 -CONFIG_MMC0_CD_PIN="PH18" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index 49eb018695..4e3ebd8b51 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=480 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 62668df01e..5a45fd08af 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_USB0_VBUS_PIN="PH17" CONFIG_USB0_VBUS_DET="PH22" CONFIG_USB0_ID_DET="PH19" diff --git a/configs/Empire_electronix_d709_defconfig b/configs/Empire_electronix_d709_defconfig index 0187b896f8..9f1d91c8e2 100644 --- a/configs/Empire_electronix_d709_defconfig +++ b/configs/Empire_electronix_d709_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_EMR1=0 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_PIN="PG12" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB0_ID_DET="PG2" diff --git a/configs/Empire_electronix_m712_defconfig b/configs/Empire_electronix_m712_defconfig index 6570b97ca4..8b8e92ef80 100644 --- a/configs/Empire_electronix_m712_defconfig +++ b/configs/Empire_electronix_m712_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-m712" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=408 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_PIN="PG12" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB0_ID_DET="PG2" diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig index 1a16155584..88f8865b28 100644 --- a/configs/Itead_Ibox_A20_defconfig +++ b/configs/Itead_Ibox_A20_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-itead-ibox" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig index 3627e4dd3a..1a93b43fbb 100644 --- a/configs/Lamobo_R1_defconfig +++ b/configs/Lamobo_R1_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_MACPWR="PH23" -CONFIG_MMC0_CD_PIN="PH10" CONFIG_SATAPWR="PB3" CONFIG_GMAC_TX_DELAY=4 CONFIG_AHCI=y diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index ce962395a2..94e4be627c 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_VIDEO_VGA=y CONFIG_VIDEO_COMPOSITE=y diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index 2e6d5dd460..4c0bae9815 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=122 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_VIDEO_COMPOSITE=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig index 3709a11ec0..10bef3d621 100644 --- a/configs/Merrii_A80_Optimus_defconfig +++ b/configs/Merrii_A80_Optimus_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus" CONFIG_SPL=y CONFIG_MACH_SUN9I=y CONFIG_DRAM_CLK=672 -CONFIG_MMC0_CD_PIN="PH18" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index 720e9e5df4..b1d41898d1 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -5,8 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_MACPWR="PH23" -CONFIG_MMC0_CD_PIN="PH10" -CONFIG_MMC3_CD_PIN="PH11" CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_USB1_VBUS_PIN="PH26" CONFIG_USB2_VBUS_PIN="PH22" diff --git a/configs/Sinlinx_SinA31s_defconfig b/configs/Sinlinx_SinA31s_defconfig index 2d33331f3d..c2935ac83a 100644 --- a/configs/Sinlinx_SinA31s_defconfig +++ b/configs/Sinlinx_SinA31s_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN6I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=251 -CONFIG_MMC0_CD_PIN="PA4" CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_USB1_VBUS_PIN="" CONFIG_USB2_VBUS_PIN="" diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index fcee14b546..0452275450 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=15291 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_ID_DET="PH8" CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:66000,le:90,ri:160,up:3,lo:127,hs:70,vs:20,sync:3,vmode:0" diff --git a/configs/Sunchip_CX-A99_defconfig b/configs/Sunchip_CX-A99_defconfig index 749bf1cff9..4828bab92a 100644 --- a/configs/Sunchip_CX-A99_defconfig +++ b/configs/Sunchip_CX-A99_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN9I=y CONFIG_DRAM_CLK=600 CONFIG_DRAM_ZQ=3881915 CONFIG_DRAM_ODT_EN=y -CONFIG_MMC0_CD_PIN="PH17" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="PH15" CONFIG_USB1_VBUS_PIN="PL7" diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig index 4e6652db18..03ab5c06eb 100644 --- a/configs/UTOO_P66_defconfig +++ b/configs/UTOO_P66_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_EMR1=0 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="PB04" CONFIG_USB0_VBUS_DET="PG01" diff --git a/configs/Wobo_i5_defconfig b/configs/Wobo_i5_defconfig index ab919c0795..309a2f265f 100644 --- a/configs/Wobo_i5_defconfig +++ b/configs/Wobo_i5_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-wobo-i5" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 -CONFIG_MMC0_CD_PIN="PB3" CONFIG_USB1_VBUS_PIN="PG12" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_STACK=0x8000 diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig index 1117e147cc..b5c1e6845b 100644 --- a/configs/Yones_Toptech_BD1078_defconfig +++ b/configs/Yones_Toptech_BD1078_defconfig @@ -4,8 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=408 -CONFIG_MMC0_CD_PIN="PH1" -CONFIG_MMC1_CD_PIN="PH2" CONFIG_MMC1_PINS_PH=y CONFIG_MMC_SUNXI_SLOT_EXTRA=1 CONFIG_USB0_VBUS_PIN="PB9" diff --git a/configs/Yones_Toptech_BS1078_V2_defconfig b/configs/Yones_Toptech_BS1078_V2_defconfig index ef30aee828..a178fdda6f 100644 --- a/configs/Yones_Toptech_BS1078_V2_defconfig +++ b/configs/Yones_Toptech_BS1078_V2_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN6I=y CONFIG_DRAM_CLK=420 CONFIG_DRAM_ZQ=251 -CONFIG_MMC0_CD_PIN="PA8" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PA15" diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig index e6b8f0f8a3..39bd81abca 100644 --- a/configs/bananapi_m2_berry_defconfig +++ b/configs/bananapi_m2_berry_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-v40-bananapi-m2-berry" CONFIG_SPL=y CONFIG_MACH_SUN8I_R40=y CONFIG_DRAM_CLK=576 -CONFIG_MMC0_CD_PIN="PH13" CONFIG_USB1_VBUS_PIN="PH23" # CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_AHCI=y diff --git a/configs/bananapi_m2_zero_defconfig b/configs/bananapi_m2_zero_defconfig index 6a3594c093..96437ca1fe 100644 --- a/configs/bananapi_m2_zero_defconfig +++ b/configs/bananapi_m2_zero_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-bananapi-m2-zero" CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=408 -CONFIG_MMC0_CD_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_STACK=0x8000 CONFIG_SYS_PBSIZE=1024 diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig index 36aa80a09b..558075ef70 100644 --- a/configs/bananapi_m64_defconfig +++ b/configs/bananapi_m64_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64" CONFIG_SPL=y CONFIG_MACH_SUN50I=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y -CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_STACK=0x54000 diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig index 2c440e44f5..680e045ccd 100644 --- a/configs/beelink_gs1_defconfig +++ b/configs/beelink_gs1_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1" CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y -CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/colorfly_e708_q1_defconfig b/configs/colorfly_e708_q1_defconfig index f17083310a..6e4fdf7065 100644 --- a/configs/colorfly_e708_q1_defconfig +++ b/configs/colorfly_e708_q1_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN6I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=251 -CONFIG_MMC0_CD_PIN="PA8" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PA15" diff --git a/configs/difrnce_dit4350_defconfig b/configs/difrnce_dit4350_defconfig index a3917eaf17..72139324a5 100644 --- a/configs/difrnce_dit4350_defconfig +++ b/configs/difrnce_dit4350_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-difrnce-dit4350" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=408 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_PIN="PG12" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB0_ID_DET="PG2" diff --git a/configs/dserve_dsrv9703c_defconfig b/configs/dserve_dsrv9703c_defconfig index c737cdb4d9..82c3e3da97 100644 --- a/configs/dserve_dsrv9703c_defconfig +++ b/configs/dserve_dsrv9703c_defconfig @@ -3,7 +3,6 @@ CONFIG_ARCH_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-dserve-dsrv9703c" CONFIG_SPL=y CONFIG_MACH_SUN4I=y -CONFIG_MMC0_CD_PIN="PH1" CONFIG_USB0_VBUS_PIN="PB9" CONFIG_USB0_VBUS_DET="PH5" CONFIG_USB0_ID_DET="PH4" diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig index c81f0f6c5e..422e2a81b8 100644 --- a/configs/gt90h_v4_defconfig +++ b/configs/gt90h_v4_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A23=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_ZQ=32767 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index 8b6936497f..0c8d8f3d91 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_EMR1=4 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_USB0_VBUS_PIN="PB9" CONFIG_USB0_VBUS_DET="PH5" CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:18,pclk_khz:100000,le:799,ri:260,up:15,lo:16,hs:1,vs:1,sync:3,vmode:0" diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index a05876a18f..340208f9ae 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=408 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 -CONFIG_MMC0_CD_PIN="PH20" CONFIG_USB0_VBUS_PIN="PB9" CONFIG_USB0_VBUS_DET="PH5" CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:24,pclk_khz:65000,le:159,ri:160,up:22,lo:15,hs:1,vs:1,sync:3,vmode:0" diff --git a/configs/iNet_D978_rev2_defconfig b/configs/iNet_D978_rev2_defconfig index 664745c9f1..d29eb30224 100644 --- a/configs/iNet_D978_rev2_defconfig +++ b/configs/iNet_D978_rev2_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=456 CONFIG_DRAM_ZQ=15291 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/icnova-a20-swac_defconfig b/configs/icnova-a20-swac_defconfig index afe5b28e66..0708ece5c7 100644 --- a/configs/icnova-a20-swac_defconfig +++ b/configs/icnova-a20-swac_defconfig @@ -11,7 +11,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 CONFIG_OLD_SUNXI_KERNEL_COMPAT=y -CONFIG_MMC0_CD_PIN="PI5" CONFIG_USB0_VBUS_PIN="PG11" CONFIG_USB0_VBUS_DET="PH7" CONFIG_USB1_VBUS_PIN="PG10" diff --git a/configs/inet86dz_defconfig b/configs/inet86dz_defconfig index 0382a4a054..3ae52cb25e 100644 --- a/configs/inet86dz_defconfig +++ b/configs/inet86dz_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A23=y CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=63351 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/inet98v_rev2_defconfig b/configs/inet98v_rev2_defconfig index c392fc2bb8..21b60cc60a 100644 --- a/configs/inet98v_rev2_defconfig +++ b/configs/inet98v_rev2_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-98v-rev2" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_PIN="PG12" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB0_ID_DET="PG2" diff --git a/configs/inet_q972_defconfig b/configs/inet_q972_defconfig index a4a828c70a..11cbe4f8dc 100644 --- a/configs/inet_q972_defconfig +++ b/configs/inet_q972_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN6I=y CONFIG_DRAM_CLK=384 CONFIG_DRAM_ZQ=251 -CONFIG_MMC0_CD_PIN="PA8" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PA15" diff --git a/configs/nanopi_m1_plus_defconfig b/configs/nanopi_m1_plus_defconfig index c71d721f74..888cabc2f0 100644 --- a/configs/nanopi_m1_plus_defconfig +++ b/configs/nanopi_m1_plus_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=408 CONFIG_MACPWR="PD6" -CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_STACK=0x8000 diff --git a/configs/oceanic_5205_5inmfd_defconfig b/configs/oceanic_5205_5inmfd_defconfig index 1cd8e9f2b6..ea63376073 100644 --- a/configs/oceanic_5205_5inmfd_defconfig +++ b/configs/oceanic_5205_5inmfd_defconfig @@ -7,7 +7,6 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=3881949 -CONFIG_MMC0_CD_PIN="" CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_STACK=0x54000 diff --git a/configs/orangepi_3_defconfig b/configs/orangepi_3_defconfig index dbca66d142..5b7459f63d 100644 --- a/configs/orangepi_3_defconfig +++ b/configs/orangepi_3_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-3" CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y -CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_BLUETOOTH_DT_DEVICE_FIXUP="brcm,bcm4345c5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig index 14c8806281..3cb94150aa 100644 --- a/configs/orangepi_lite2_defconfig +++ b/configs/orangepi_lite2_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-lite2" CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y -CONFIG_MMC0_CD_PIN="PF6" # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_STACK=0x118000 diff --git a/configs/orangepi_one_plus_defconfig b/configs/orangepi_one_plus_defconfig index a4336332fc..da77dc6cef 100644 --- a/configs/orangepi_one_plus_defconfig +++ b/configs/orangepi_one_plus_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-one-plus" CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y -CONFIG_MMC0_CD_PIN="PF6" # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_STACK=0x118000 diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig index cad7a7bb06..6996a073fb 100644 --- a/configs/orangepi_zero2_defconfig +++ b/configs/orangepi_zero2_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_SUN50I_H616_READ_CALIBRATION=y CONFIG_DRAM_SUN50I_H616_READ_TRAINING=y CONFIG_DRAM_SUN50I_H616_WRITE_TRAINING=y CONFIG_MACH_SUN50I_H616=y -CONFIG_MMC0_CD_PIN="PF6" CONFIG_R_I2C_ENABLE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_MAX_SIZE=0xbfa0 diff --git a/configs/orangepi_zero_plus2_defconfig b/configs/orangepi_zero_plus2_defconfig index 02f70ccf0c..34f1c71d2f 100644 --- a/configs/orangepi_zero_plus2_defconfig +++ b/configs/orangepi_zero_plus2_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_CLK=672 CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set -CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_STACK=0x54000 diff --git a/configs/orangepi_zero_plus2_h3_defconfig b/configs/orangepi_zero_plus2_h3_defconfig index b2d4f3f8e0..eb52a3d3cc 100644 --- a/configs/orangepi_zero_plus2_h3_defconfig +++ b/configs/orangepi_zero_plus2_h3_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 # CONFIG_DRAM_ODT_EN is not set -CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_STACK=0x8000 diff --git a/configs/parrot_r16_defconfig b/configs/parrot_r16_defconfig index 14e9b455fe..68674ea2c7 100644 --- a/configs/parrot_r16_defconfig +++ b/configs/parrot_r16_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=600 CONFIG_DRAM_ZQ=15291 -CONFIG_MMC0_CD_PIN="PD14" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_ID_DET="PD10" CONFIG_USB1_VBUS_PIN="PD12" diff --git a/configs/pine64-lts_defconfig b/configs/pine64-lts_defconfig index 3f9ea1e329..9fd2e3d807 100644 --- a/configs/pine64-lts_defconfig +++ b/configs/pine64-lts_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN50I=y CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=3881949 -CONFIG_MMC0_CD_PIN="" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/pine_h64_defconfig b/configs/pine_h64_defconfig index 2f511c8051..2d3dedcc56 100644 --- a/configs/pine_h64_defconfig +++ b/configs/pine_h64_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y CONFIG_MACPWR="PC16" -CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB3_VBUS_PIN="PL5" CONFIG_SPL_SPI_SUNXI=y diff --git a/configs/polaroid_mid2407pxe03_defconfig b/configs/polaroid_mid2407pxe03_defconfig index 74ffaf1d01..46538d63f6 100644 --- a/configs/polaroid_mid2407pxe03_defconfig +++ b/configs/polaroid_mid2407pxe03_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A23=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=63351 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/polaroid_mid2809pxe04_defconfig b/configs/polaroid_mid2809pxe04_defconfig index 10057ade9a..b2019aa476 100644 --- a/configs/polaroid_mid2809pxe04_defconfig +++ b/configs/polaroid_mid2809pxe04_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A23=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=63351 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/q8_a13_tablet_defconfig b/configs/q8_a13_tablet_defconfig index 83981d3ac7..4717d2f97f 100644 --- a/configs/q8_a13_tablet_defconfig +++ b/configs/q8_a13_tablet_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-q8-tablet" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_PIN="PG12" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB0_ID_DET="PG2" diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig index 11d208a34a..da9c77167e 100644 --- a/configs/q8_a23_tablet_800x480_defconfig +++ b/configs/q8_a23_tablet_800x480_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A23=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=63306 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig index c848e62d73..4d8ba26d1e 100644 --- a/configs/q8_a33_tablet_1024x600_defconfig +++ b/configs/q8_a33_tablet_1024x600_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=456 CONFIG_DRAM_ZQ=15291 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig index ee5654185b..c19b057e35 100644 --- a/configs/q8_a33_tablet_800x480_defconfig +++ b/configs/q8_a33_tablet_800x480_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=456 CONFIG_DRAM_ZQ=15291 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/sopine_baseboard_defconfig b/configs/sopine_baseboard_defconfig index 55116f72d0..cbabd10f06 100644 --- a/configs/sopine_baseboard_defconfig +++ b/configs/sopine_baseboard_defconfig @@ -7,7 +7,6 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=3881949 -CONFIG_MMC0_CD_PIN="" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/tanix_tx6_defconfig b/configs/tanix_tx6_defconfig index 84dbf106d4..c854d546aa 100644 --- a/configs/tanix_tx6_defconfig +++ b/configs/tanix_tx6_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_DDR3_1333=y CONFIG_DRAM_CLK=648 -CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_STACK=0x118000
On 7/13/22 11:21, Andre Przywara wrote:
For legacy reasons we were defining the card detect GPIO for all sunxi boards in each board's defconfig. There is actually no need for a card-detect check in the SPL code (which consequently has been removed already), and also in U-Boot proper we have DM code to query the CD GPIO name from the device tree.
That means we don't have any user of that information left, so can remove the definitions from the defconfigs.
Signed-off-by: Andre Przywara andre.przywara@arm.com
arch/arm/mach-sunxi/Kconfig | 27 --------------------
Reviewed-by: Samuel Holland samuel@sholland.org Tested-by: Samuel Holland samuel@sholland.org
participants (2)
-
Andre Przywara -
Samuel Holland