Ed, I have never had to do anything to get the environment to work. I think it tries to read the environment and if the sector is erased, it creates the default environment in RAM. Brad

-----Original Message----- From: Ed Okerson [mailto:eokerson@texasconnect.net] Sent: Thu 1/29/2004 4:31 PM To: U-Boot-Users@lists.sourceforge.net Cc: Subject: [U-Boot-Users] Env in flash

When I build U-Boot with CFG_ENV_IS_NOWHERE the system boots and runs fine, but I am trying to move to a flash environment so I define CFG_ENV_IS_IN_FLASH and set the appropriate CFG_ENV_ADDR, CFG_ENV_SIZE, and CFG_ENV_SECT_SIZE to put the environment in an empty flash sector. After doing that however, U-Boot hangs after displaying the amount of flash on the board. Is there something I need to do to initialize the environment sector? Ed Okerson ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users