[U-Boot] [PATCH] ARM: dh_imx6: enable GigaDevice, Macronix, and Winbond SPI Flash support in Kconfig
From: Ludwig Zenz lzenz@dh-electronics.de
In preparation for delivery bottlenecks, enable support for GigaDevice, Macronix, and Winbond nor flash chips.
Signed-off-by: Ludwig Zenz lzenz@dh-electronics.de --- configs/dh_imx6_defconfig | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index db1460b..8f45531 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -39,7 +39,10 @@ CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_ADDR=0x00900000 CONFIG_FSL_ESDHC=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y
On 06/07/2018 11:26, lzenz@dh-electronics.de wrote:
From: Ludwig Zenz lzenz@dh-electronics.de
In preparation for delivery bottlenecks, enable support for GigaDevice, Macronix, and Winbond nor flash chips.
Signed-off-by: Ludwig Zenz lzenz@dh-electronics.de
configs/dh_imx6_defconfig | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index db1460b..8f45531 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -39,7 +39,10 @@ CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_ADDR=0x00900000 CONFIG_FSL_ESDHC=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y
Applied to u-boot-imx, thanks !
Best regards, Stefano Babic
participants (2)
-
lzenz＠dh-electronics.de -
Stefano Babic