[U-Boot] U-BOOT MPC8560 based board : No prints after relocation
17 Feb
2009
17 Feb
'09
12:27 p.m.
Hello
I am porting U-BOOT on an MPC8560ADS like custom board with 1GB DDR SDRAM. My minicom port is connected to SCC1 of MPC8560 on 9600 8N1 baud rate. After relocation of U-BOOT in RAM prints stops coming
My boot flash 0xfff80000 - 0xffffffff
TEXT_BASE = 0xfff80000
Using emulator I took dump of SDRAM. U-BOOT code is there.
Any idea why prints are not coming
with regards,
Deepak Gaur
17 Feb
17 Feb
12:51 p.m.
Dear "Deepak Gaur",
In message 20090217112225.M67044@cdotd.ernet.in you wrote:
I am porting U-BOOT on an MPC8560ADS like custom board with 1GB DDR SDRAM. My minicom port is connected to SCC1 of MPC8560 on 9600 8N1 baud rate. After relocation of U-BOOT in RAM prints stops coming
See U-Boot FAQ "U-Boot crashes after relocation to RAM"
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"'Tis true, 'tis pity, and pity 'tis 'tis true."
- Poloniouius, in Willie the Shake's _Hamlet, Prince of Darkness_
5930
Age (days ago)
5930
Last active (days ago)
1 comments
2 participants
participants (2)
-
Deepak Gaur -
Wolfgang Denk