From: Jorge Ramirez-Ortiz jorge@foundries.io

This commit gives the secure world access to the I2C bus so it can communicate with I2C slaves (typically those would be secure elements like the NXP SE050).

A similar service implementation has been merged in linux: c05210ab ("drivers: optee: allow op-tee to access devices on the i2c bus")

Signed-off-by: Jorge Ramirez-Ortiz jorge@foundries.io Reviewed-by: Simon Glass sjg@chromium.org Reviewed-by: Etienne Carriere etienne.carriere@linaro.org ---

drivers/tee/optee/Makefile | 1 + drivers/tee/optee/i2c.c | 90 ++++++++++++++++++++++++ drivers/tee/optee/optee_msg.h | 21 ++++++ drivers/tee/optee/optee_msg_supplicant.h | 5 ++ drivers/tee/optee/optee_private.h | 17 +++++ drivers/tee/optee/supplicant.c | 3 + 6 files changed, 137 insertions(+) create mode 100644 drivers/tee/optee/i2c.c

diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile index 928d3f8002..068c6e7aa1 100644 --- a/drivers/tee/optee/Makefile +++ b/drivers/tee/optee/Makefile @@ -2,4 +2,5 @@

obj-y += core.o obj-y += supplicant.o +obj-$(CONFIG_DM_I2C) += i2c.o obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o diff --git a/drivers/tee/optee/i2c.c b/drivers/tee/optee/i2c.c new file mode 100644 index 0000000000..ef4e10f991 --- /dev/null +++ b/drivers/tee/optee/i2c.c @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: BSD-2-Clause +/* + * Copyright (c) 2020 Foundries.io Ltd + */ + +#include <common.h> +#include <dm.h> +#include <i2c.h> +#include <tee.h> +#include "optee_msg.h" +#include "optee_private.h" + +static int check_xfer_flags(struct udevice *chip, uint tee_flags) +{ + uint flags; + int ret; + + ret = i2c_get_chip_flags(chip, &flags); + if (ret) + return ret; + + if (tee_flags & OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT) { + if (!(flags & DM_I2C_CHIP_10BIT)) + return -EINVAL; + } else { + if (flags & DM_I2C_CHIP_10BIT) + return -EINVAL; + } + + return 0; +} + +void optee_suppl_cmd_i2c_transfer(struct optee_msg_arg *arg) +{ + const u8 attr[] = { + OPTEE_MSG_ATTR_TYPE_VALUE_INPUT, + OPTEE_MSG_ATTR_TYPE_VALUE_INPUT, + OPTEE_MSG_ATTR_TYPE_RMEM_INOUT, + OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT, + }; + struct udevice *chip_dev; + struct tee_shm *shm; + u8 *buf; + int ret; + + if (arg->num_params != ARRAY_SIZE(attr) || + arg->params[0].attr != attr[0] || + arg->params[1].attr != attr[1] || + arg->params[2].attr != attr[2] || + arg->params[3].attr != attr[3]) { + goto bad; + } + + shm = (struct tee_shm *)(unsigned long)arg->params[2].u.rmem.shm_ref; + buf = shm->addr; + if (!buf) + goto bad; + + if (i2c_get_chip_for_busnum((int)arg->params[0].u.value.b, + (int)arg->params[0].u.value.c, + 0, &chip_dev)) + goto bad; + + if (check_xfer_flags(chip_dev, arg->params[1].u.value.a)) + goto bad; + + switch (arg->params[0].u.value.a) { + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD: + ret = dm_i2c_read(chip_dev, 0, buf, + (size_t)arg->params[2].u.rmem.size); + break; + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR: + ret = dm_i2c_write(chip_dev, 0, buf, + (size_t)arg->params[2].u.rmem.size); + break; + default: + goto bad; + } + + if (ret) { + arg->ret = TEE_ERROR_COMMUNICATION; + } else { + arg->params[3].u.value.a = arg->params[2].u.rmem.size; + arg->ret = TEE_SUCCESS; + } + + return; +bad: + arg->ret = TEE_ERROR_BAD_PARAMETERS; +} diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h index 24c60960fc..8d40ce60c2 100644 --- a/drivers/tee/optee/optee_msg.h +++ b/drivers/tee/optee/optee_msg.h @@ -422,4 +422,25 @@ struct optee_msg_arg { */ #define OPTEE_MSG_RPC_CMD_SHM_FREE 7

+/* + * Access a device on an i2c bus + * + * [in] param[0].u.value.a mode: RD(0), WR(1) + * [in] param[0].u.value.b i2c adapter + * [in] param[0].u.value.c i2c chip + * + * [in] param[1].u.value.a i2c control flags + * + * [in/out] memref[2] buffer to exchange the transfer data + * with the secure world + * + * [out] param[3].u.value.a bytes transferred by the driver + */ +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21 +/* I2C master transfer modes */ +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0 +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1 +/* I2C master control flags */ +#define OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT BIT(0) + #endif /* _OPTEE_MSG_H */ diff --git a/drivers/tee/optee/optee_msg_supplicant.h b/drivers/tee/optee/optee_msg_supplicant.h index a0fb8063c8..963cfd4782 100644 --- a/drivers/tee/optee/optee_msg_supplicant.h +++ b/drivers/tee/optee/optee_msg_supplicant.h @@ -147,6 +147,11 @@ #define OPTEE_MSG_RPC_CMD_SHM_ALLOC 6 #define OPTEE_MSG_RPC_CMD_SHM_FREE 7

+/* + * I2C bus access + */ +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21 + /* * Was OPTEE_MSG_RPC_CMD_SQL_FS, which isn't supported any longer */ diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h index 9442d1c176..1f07a27ee4 100644 --- a/drivers/tee/optee/optee_private.h +++ b/drivers/tee/optee/optee_private.h @@ -60,6 +60,23 @@ static inline void optee_suppl_rpmb_release(struct udevice *dev) } #endif

+#ifdef CONFIG_DM_I2C +/** + * optee_suppl_cmd_i2c_transfer() - route I2C requests to an I2C chip + * @arg: OP-TEE message (layout specified in optee_msg.h) defining the + * transfer mode (read/write), adapter, chip and control flags. + * + * Handles OP-TEE requests to transfer data to the I2C chip on the I2C adapter. + */ +void optee_suppl_cmd_i2c_transfer(struct optee_msg_arg *arg); +#else +static inline void optee_suppl_cmd_i2c_transfer(struct optee_msg_arg *arg) +{ + debug("OPTEE_MSG_RPC_CMD_I2C_TRANSFER not implemented\n"); + arg->ret = TEE_ERROR_NOT_IMPLEMENTED; +} +#endif + void *optee_alloc_and_init_page_list(void *buf, ulong len, u64 *phys_buf_ptr);

#endif /* __OPTEE_PRIVATE_H */ diff --git a/drivers/tee/optee/supplicant.c b/drivers/tee/optee/supplicant.c index ae042b9a20..f9dd874b59 100644 --- a/drivers/tee/optee/supplicant.c +++ b/drivers/tee/optee/supplicant.c @@ -89,6 +89,9 @@ void optee_suppl_cmd(struct udevice *dev, struct tee_shm *shm_arg, case OPTEE_MSG_RPC_CMD_RPMB: optee_suppl_cmd_rpmb(dev, arg); break; + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER: + optee_suppl_cmd_i2c_transfer(arg); + break; default: arg->ret = TEE_ERROR_NOT_IMPLEMENTED; }

From: Igor Opaniuk igor.opaniuk@foundries.io

Add pygit2 and pyelftools to the list of packages for virtualenv needed to run all sets of pytests.This fixes warnings like:

binman.elf_test.TestElf.testDecodeElf (subunit.RemotedTestCase): Python elftools not available

Signed-off-by: Igor Opaniuk igor.opaniuk@foundries.io Reviewed-by: Simon Glass sjg@chromium.org ---

test/py/requirements.txt | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/test/py/requirements.txt b/test/py/requirements.txt index cf251186f4..926bccad69 100644 --- a/test/py/requirements.txt +++ b/test/py/requirements.txt @@ -10,6 +10,8 @@ packaging==19.2 pbr==5.4.3 pluggy==0.13.0 py==1.8.0 +pyelftools==0.27 +pygit2==1.4.0 pyparsing==2.4.2 pytest==5.2.1 python-mimeparse==1.6.0

From: Igor Opaniuk igor.opaniuk@foundries.io

This adds support for RPC test trusted application emulation, which permits to test reverse RPC calls to TEE supplicant. Currently it covers requests to the I2C bus from TEE.

Signed-off-by: Igor Opaniuk igor.opaniuk@foundries.io Reviewed-by: Simon Glass sjg@chromium.org Reviewed-by: Jens Wiklander jens.wiklander@linaro.org Acked-by: Etienne Carriere etienne.carriere@linaro.org ---

drivers/tee/Makefile | 2 + drivers/tee/optee/Kconfig | 9 ++ drivers/tee/sandbox.c | 142 +++++++++++++++++++++++++++++++- include/tee/optee_ta_rpc_test.h | 30 +++++++ 4 files changed, 179 insertions(+), 4 deletions(-) create mode 100644 include/tee/optee_ta_rpc_test.h

diff --git a/drivers/tee/Makefile b/drivers/tee/Makefile index 5c8ffdbce8..ff844195ae 100644 --- a/drivers/tee/Makefile +++ b/drivers/tee/Makefile @@ -2,5 +2,7 @@

obj-y += tee-uclass.o obj-$(CONFIG_SANDBOX) += sandbox.o +obj-$(CONFIG_OPTEE_TA_RPC_TEST) += optee/supplicant.o +obj-$(CONFIG_OPTEE_TA_RPC_TEST) += optee/i2c.o obj-$(CONFIG_OPTEE) += optee/ obj-y += broadcom/ diff --git a/drivers/tee/optee/Kconfig b/drivers/tee/optee/Kconfig index d489834df9..65622f30b1 100644 --- a/drivers/tee/optee/Kconfig +++ b/drivers/tee/optee/Kconfig @@ -22,6 +22,15 @@ config OPTEE_TA_AVB The TA can support the "avb" subcommands "read_rb", "write"rb" and "is_unlocked".

+config OPTEE_TA_RPC_TEST + bool "Support RPC TEST TA" + depends on SANDBOX_TEE + default y + help + Enables support for RPC test trusted application emulation, which + permits to test reverse RPC calls to TEE supplicant. Should + be used only in sandbox env. + endmenu

endif diff --git a/drivers/tee/sandbox.c b/drivers/tee/sandbox.c index e1ba027fd6..3a1d34d6fc 100644 --- a/drivers/tee/sandbox.c +++ b/drivers/tee/sandbox.c @@ -7,11 +7,15 @@ #include <sandboxtee.h> #include <tee.h> #include <tee/optee_ta_avb.h> +#include <tee/optee_ta_rpc_test.h> + +#include "optee/optee_msg.h" +#include "optee/optee_private.h"

/* * The sandbox tee driver tries to emulate a generic Trusted Exectution - * Environment (TEE) with the Trusted Application (TA) OPTEE_TA_AVB - * available. + * Environment (TEE) with the Trusted Applications (TA) OPTEE_TA_AVB and + * OPTEE_TA_RPC_TEST available. */

static const u32 pstorage_max = 16; @@ -32,7 +36,38 @@ struct ta_entry { struct tee_param *params); };

-#ifdef CONFIG_OPTEE_TA_AVB +static int get_msg_arg(struct udevice *dev, uint num_params, + struct tee_shm **shmp, struct optee_msg_arg **msg_arg) +{ + int rc; + struct optee_msg_arg *ma; + + rc = __tee_shm_add(dev, OPTEE_MSG_NONCONTIG_PAGE_SIZE, NULL, + OPTEE_MSG_GET_ARG_SIZE(num_params), TEE_SHM_ALLOC, + shmp); + if (rc) + return rc; + + ma = (*shmp)->addr; + memset(ma, 0, OPTEE_MSG_GET_ARG_SIZE(num_params)); + ma->num_params = num_params; + *msg_arg = ma; + + return 0; +} + +void *optee_alloc_and_init_page_list(void *buf, ulong len, + u64 *phys_buf_ptr) +{ + /* + * An empty stub is added just to fix linking issues. + * This function isn't supposed to be called in sandbox + * setup, otherwise replace this with a proper + * implementation from optee/core.c + */ + return NULL; +} + static u32 get_attr(uint n, uint num_params, struct tee_param *params) { if (n >= num_params) @@ -63,6 +98,7 @@ bad_params: return TEE_ERROR_BAD_PARAMETERS; }

+#ifdef CONFIG_OPTEE_TA_AVB static u32 ta_avb_open_session(struct udevice *dev, uint num_params, struct tee_param *params) { @@ -214,7 +250,99 @@ static u32 ta_avb_invoke_func(struct udevice *dev, u32 func, uint num_params, return TEE_ERROR_NOT_SUPPORTED; } } -#endif /*OPTEE_TA_AVB*/ +#endif /* OPTEE_TA_AVB */ + +#ifdef CONFIG_OPTEE_TA_RPC_TEST +static u32 ta_rpc_test_open_session(struct udevice *dev, uint num_params, + struct tee_param *params) +{ + /* + * We don't expect additional parameters when opening a session to + * this TA. + */ + return check_params(TEE_PARAM_ATTR_TYPE_NONE, TEE_PARAM_ATTR_TYPE_NONE, + TEE_PARAM_ATTR_TYPE_NONE, TEE_PARAM_ATTR_TYPE_NONE, + num_params, params); +} + +static void fill_i2c_rpc_params(struct optee_msg_arg *msg_arg, u64 bus_num, + u64 chip_addr, u64 xfer_flags, u64 op, + struct tee_param_memref memref) +{ + msg_arg->params[0].attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT; + msg_arg->params[1].attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT; + msg_arg->params[2].attr = OPTEE_MSG_ATTR_TYPE_RMEM_INOUT; + msg_arg->params[3].attr = OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT; + + /* trigger I2C services of TEE supplicant */ + msg_arg->cmd = OPTEE_MSG_RPC_CMD_I2C_TRANSFER; + + msg_arg->params[0].u.value.a = op; + msg_arg->params[0].u.value.b = bus_num; + msg_arg->params[0].u.value.c = chip_addr; + msg_arg->params[1].u.value.a = xfer_flags; + + /* buffer to read/write data */ + msg_arg->params[2].u.rmem.shm_ref = (ulong)memref.shm; + msg_arg->params[2].u.rmem.size = memref.size; + msg_arg->params[2].u.rmem.offs = memref.shm_offs; + + msg_arg->num_params = 4; +} + +static u32 ta_rpc_test_invoke_func(struct udevice *dev, u32 func, + uint num_params, + struct tee_param *params) +{ + struct tee_shm *shm; + struct tee_param_memref memref_data; + struct optee_msg_arg *msg_arg; + int chip_addr, bus_num, op, xfer_flags; + int res; + + res = check_params(TEE_PARAM_ATTR_TYPE_VALUE_INPUT, + TEE_PARAM_ATTR_TYPE_MEMREF_INOUT, + TEE_PARAM_ATTR_TYPE_NONE, + TEE_PARAM_ATTR_TYPE_NONE, + num_params, params); + if (res) + return TEE_ERROR_BAD_PARAMETERS; + + bus_num = params[0].u.value.a; + chip_addr = params[0].u.value.b; + xfer_flags = params[0].u.value.c; + memref_data = params[1].u.memref; + + switch (func) { + case TA_RPC_TEST_CMD_I2C_READ: + op = OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD; + break; + case TA_RPC_TEST_CMD_I2C_WRITE: + op = OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR; + break; + default: + return TEE_ERROR_NOT_SUPPORTED; + } + + /* + * Fill params for an RPC call to tee supplicant + */ + res = get_msg_arg(dev, 4, &shm, &msg_arg); + if (res) + goto out; + + fill_i2c_rpc_params(msg_arg, bus_num, chip_addr, xfer_flags, op, + memref_data); + + /* Make an RPC call to tee supplicant */ + optee_suppl_cmd(dev, shm, 0); + res = msg_arg->ret; +out: + tee_shm_free(shm); + + return res; +} +#endif /* CONFIG_OPTEE_TA_RPC_TEST */

static const struct ta_entry ta_entries[] = { #ifdef CONFIG_OPTEE_TA_AVB @@ -223,6 +351,12 @@ static const struct ta_entry ta_entries[] = { .invoke_func = ta_avb_invoke_func, }, #endif +#ifdef CONFIG_OPTEE_TA_RPC_TEST + { .uuid = TA_RPC_TEST_UUID, + .open_session = ta_rpc_test_open_session, + .invoke_func = ta_rpc_test_invoke_func, + }, +#endif };

static void sandbox_tee_get_version(struct udevice *dev, diff --git a/include/tee/optee_ta_rpc_test.h b/include/tee/optee_ta_rpc_test.h new file mode 100644 index 0000000000..9491fbab1d --- /dev/null +++ b/include/tee/optee_ta_rpc_test.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: BSD-2-Clause */ +/* Copyright (c) 2020 Foundries Ltd */ + +#ifndef __TA_RPC_TEST_H +#define __TA_RPC_TEST_H + +#define TA_RPC_TEST_UUID { 0x48420575, 0x96ca, 0x401a, \ + { 0x89, 0x91, 0x1e, 0xfd, 0xce, 0xbd, 0x7d, 0x04 } } + +/* + * Does a reverse RPC call for I2C read + * + * in params[0].value.a: bus number + * in params[0].value.b: chip address + * in params[0].value.c: control flags + * inout params[1].u.memref: buffer to read data + */ +#define TA_RPC_TEST_CMD_I2C_READ 0 + +/* + * Does a reverse RPC call for I2C write + * + * in params[0].value.a: bus number + * in params[0].value.b: chip address + * in params[0].value.c: control flags + * inout params[1].u.memref: buffer with data to write + */ +#define TA_RPC_TEST_CMD_I2C_WRITE 1 + +#endif /* __TA_RPC_TEST_H */

From: Igor Opaniuk igor.opaniuk@foundries.io

Extend existing DM tee tests adding test coverage for reverse RPC calls. Currently this commit only adds tests for I2C requests from TEE driver to TEE supplicant, for instance reading/writing data to emulated i2c eeprom defines in standard sandbox test device tree (arch/sandbox/dts/test.dtb):

=> i2c bus Bus 0: i2c@0 (active 0) 2c: eeprom@2c, offset len 1, flags 0 ...

Running TEE tests: => ut dm tee Test: dm_test_tee: tee.c Test: dm_test_tee: tee.c (flat tree) Failures: 0

Signed-off-by: Igor Opaniuk igor.opaniuk@foundries.io Reviewed-by: Simon Glass sjg@chromium.org Acked-by: Etienne Carriere etienne.carriere@linaro.org

---

test/dm/tee.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 109 insertions(+), 7 deletions(-)

diff --git a/test/dm/tee.c b/test/dm/tee.c index ddbdcfb0cf..7a11bf8913 100644 --- a/test/dm/tee.c +++ b/test/dm/tee.c @@ -13,15 +13,16 @@ #include <test/test.h> #include <test/ut.h> #include <tee/optee_ta_avb.h> +#include <tee/optee_ta_rpc_test.h>

-static int open_session(struct udevice *dev, u32 *session) +static int open_session(struct udevice *dev, u32 *session, + struct tee_optee_ta_uuid *uuid) { struct tee_open_session_arg arg; - const struct tee_optee_ta_uuid uuid = TA_AVB_UUID; int rc;

memset(&arg, 0, sizeof(arg)); - tee_optee_ta_uuid_to_octets(arg.uuid, &uuid); + tee_optee_ta_uuid_to_octets(arg.uuid, uuid); rc = tee_open_session(dev, &arg, 0, NULL); if (rc) return rc; @@ -32,7 +33,7 @@ static int open_session(struct udevice *dev, u32 *session) return 0; }

-static int invoke_func(struct udevice *dev, u32 session) +static int invoke_func_avb(struct udevice *dev, u32 session) { struct tee_param param = { .attr = TEE_PARAM_ATTR_TYPE_VALUE_OUTPUT }; struct tee_invoke_arg arg; @@ -47,6 +48,48 @@ static int invoke_func(struct udevice *dev, u32 session) return 0; }

+static int invoke_func_rpc_test(struct udevice *dev, u32 session, + u64 op, u64 busnum, u64 chip_addr, + u64 xfer_flags, u8 *buf, size_t buf_size) +{ + struct tee_param param[2]; + struct tee_invoke_arg arg; + struct tee_shm *shm_buf; + int rc; + + memset(&arg, 0, sizeof(arg)); + arg.session = session; + arg.func = op; + + rc = tee_shm_alloc(dev, buf_size, + TEE_SHM_ALLOC, &shm_buf); + if (rc) + return rc; + + if (op == TA_RPC_TEST_CMD_I2C_WRITE) + memcpy(shm_buf->addr, buf, buf_size); + + memset(param, 0, sizeof(param)); + param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_INPUT; + param[0].u.value.a = busnum; + param[0].u.value.b = chip_addr; + param[0].u.value.c = xfer_flags; + param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INOUT; + param[1].u.memref.shm = shm_buf; + param[1].u.memref.size = buf_size; + + if (tee_invoke_func(dev, &arg, 2, param) || arg.ret) { + rc = -1; + goto out; + } + + if (op == TA_RPC_TEST_CMD_I2C_READ) + memcpy(buf, shm_buf->addr, buf_size); +out: + tee_shm_free(shm_buf); + return rc; +} + static int match(struct tee_version_data *vers, const void *data) { return vers->gen_caps & TEE_GEN_CAP_GP; @@ -62,6 +105,7 @@ static int test_tee(struct unit_test_state *uts, struct test_tee_vars *vars) struct tee_version_data vers; struct udevice *dev; struct sandbox_tee_state *state; + struct tee_optee_ta_uuid avb_uuid = TA_AVB_UUID; u32 session = 0; int rc; u8 data[128]; @@ -71,11 +115,11 @@ static int test_tee(struct unit_test_state *uts, struct test_tee_vars *vars) state = dev_get_priv(dev); ut_assert(!state->session);

- rc = open_session(dev, &session); + rc = open_session(dev, &session, &avb_uuid); ut_assert(!rc); ut_assert(session == state->session);

- rc = invoke_func(dev, session); + rc = invoke_func_avb(dev, session); ut_assert(!rc);

rc = tee_close_session(dev, session); @@ -100,7 +144,59 @@ static int test_tee(struct unit_test_state *uts, struct test_tee_vars *vars) vars->alloc_shm = NULL; ut_assert(!state->num_shms);

- return 0; + return rc; +} + +#define I2C_BUF_SIZE 64 + +static int test_tee_rpc(struct unit_test_state *uts) +{ + struct tee_version_data vers; + struct udevice *dev; + struct sandbox_tee_state *state; + struct tee_optee_ta_uuid rpc_test_uuid = TA_RPC_TEST_UUID; + u32 session = 0; + int rc; + + char *test_str = "Test string"; + u8 data[I2C_BUF_SIZE] = {0}; + u8 data_from_eeprom[I2C_BUF_SIZE] = {0}; + + /* Use sandbox I2C EEPROM emulation; bus: 0, chip: 0x2c */ + u64 bus = 0; + u64 chip = 0x2c; + u64 xfer_flags = 0; + + dev = tee_find_device(NULL, match, NULL, &vers); + ut_assert(dev); + state = dev_get_priv(dev); + ut_assert(!state->session); + + /* Test RPC call asking for I2C service */ + rc = open_session(dev, &session, &rpc_test_uuid); + ut_assert(!rc); + ut_assert(session == state->session); + + /* Write buffer */ + strncpy((char *)data, test_str, strlen(test_str)); + rc = invoke_func_rpc_test(dev, session, TA_RPC_TEST_CMD_I2C_WRITE, + bus, chip, xfer_flags, data, sizeof(data)); + ut_assert(!rc); + + /* Read buffer */ + rc = invoke_func_rpc_test(dev, session, TA_RPC_TEST_CMD_I2C_READ, + bus, chip, xfer_flags, data_from_eeprom, + sizeof(data_from_eeprom)); + ut_assert(!rc); + + /* Compare */ + ut_assert(!memcmp(data, data_from_eeprom, sizeof(data))); + + rc = tee_close_session(dev, session); + ut_assert(!rc); + ut_assert(!state->session); + + return rc; }

static int dm_test_tee(struct unit_test_state *uts) @@ -108,6 +204,12 @@ static int dm_test_tee(struct unit_test_state *uts) struct test_tee_vars vars = { NULL, NULL }; int rc = test_tee(uts, &vars);

+ if (rc) + goto out; + + if (IS_ENABLED(CONFIG_OPTEE_TA_RPC_TEST)) + rc = test_tee_rpc(uts); +out: /* In case test_tee() asserts these may still remain allocated */ tee_shm_free(vars.reg_shm); tee_shm_free(vars.alloc_shm);