SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC. In this patch, support SCIF, NOR Flash, and Ethernet.

Signed-off-by: Nobuhiro Iwamatsu iwamatsu.nobuhiro@renesas.com --- MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 5 + board/sh7763rdp/Makefile | 47 +++++ board/sh7763rdp/config.mk | 11 ++ board/sh7763rdp/lowlevel_init.S | 351 +++++++++++++++++++++++++++++++++++++++ board/sh7763rdp/sh7763rdp.c | 76 +++++++++ board/sh7763rdp/u-boot.lds | 106 ++++++++++++ include/configs/sh7763rdp.h | 129 ++++++++++++++ 9 files changed, 727 insertions(+), 0 deletions(-) create mode 100644 board/sh7763rdp/Makefile create mode 100644 board/sh7763rdp/config.mk create mode 100644 board/sh7763rdp/lowlevel_init.S create mode 100644 board/sh7763rdp/sh7763rdp.c create mode 100644 board/sh7763rdp/u-boot.lds create mode 100644 include/configs/sh7763rdp.h

diff --git a/MAINTAINERS b/MAINTAINERS index d3dfd48..b3daaeb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -718,6 +718,7 @@ Nobuhiro Iwamatsu iwamatsu@nigauri.org MS7722SE SH7722 R7780MP SH7780 R2DPlus SH7751R + SH7763RDP SH7763

Mark Jonas mark.jonas@de.bosch.com

diff --git a/MAKEALL b/MAKEALL index 3cb1d24..45ef33e 100755 --- a/MAKEALL +++ b/MAKEALL @@ -749,6 +749,7 @@ LIST_sh4=" \ Migo-R \ r7780mp \ r2dplus \ + sh7763rdp \ "

LIST_sh=" \ diff --git a/Makefile b/Makefile index cc988e1..cb63223 100644 --- a/Makefile +++ b/Makefile @@ -2941,6 +2941,11 @@ r2dplus_config : unconfig @echo "#define CONFIG_R2DPLUS 1" >> include/config.h @./mkconfig -a $(@:_config=) sh sh4 r2dplus

+sh7763rdp_config : unconfig + @ >include/config.h + @echo "#define CONFIG_SH7763RDP 1" >> include/config.h + @./mkconfig -a $(@:_config=) sh sh4 sh7763rdp + #======================================================================== # SPARC #======================================================================== diff --git a/board/sh7763rdp/Makefile b/board/sh7763rdp/Makefile new file mode 100644 index 0000000..9e63ea7 --- /dev/null +++ b/board/sh7763rdp/Makefile @@ -0,0 +1,47 @@ +# +# Copyright (C) 2008 Renesas Solutions Corp. +# Copyright (C) 2008 Nobuhiro Iwamatsu iwamatsu.nobuhiro@renesas.com +# Copyright (C) 2007 Kenati Technologies, Inc. +# +# board/sh7763rdp/Makefile +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := sh7763rdp.o +SOBJS := lowlevel_init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/sh7763rdp/config.mk b/board/sh7763rdp/config.mk new file mode 100644 index 0000000..c52dbfd --- /dev/null +++ b/board/sh7763rdp/config.mk @@ -0,0 +1,11 @@ +# +# board/sh7763rdp/config.mk +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# + +TEXT_BASE = 0x8FFC0000 + +# PLATFORM_CPPFLAGS += -DCONFIG_MULTIBOOT diff --git a/board/sh7763rdp/lowlevel_init.S b/board/sh7763rdp/lowlevel_init.S new file mode 100644 index 0000000..1942892 --- /dev/null +++ b/board/sh7763rdp/lowlevel_init.S @@ -0,0 +1,351 @@ +/* + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu iwamatsu.nobuhiro@renesas.com + * Copyright (C) 2007 Kenati Technologies, Inc. + * + * board/sh7763rdp/lowlevel_init.S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> + +#include <asm/processor.h> + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + + mov.l WDTCSR_A, r1 /* Watchdog Control / Status Register */ + mov.l WDTCSR_D, r0 + mov.l r0, @r1 + + mov.l WDTST_A, r1 /* Watchdog Stop Time Register */ + mov.l WDTST_D, r0 + mov.l r0, @r1 + + mov.l WDTBST_A, r1 /* 0xFFCC0008 (Watchdog Base Stop Time Register */ + mov.l WDTBST_D, r0 + mov.l r0, @r1 + + mov.l CCR_A, r1 /* Address of Cache Control Register */ + mov.l CCR_CACHE_ICI_D, r0 /* Instruction Cache Invalidate */ + mov.l r0, @r1 + + mov.l MMUCR_A, r1 /* Address of MMU Control Register */ + mov.l MMU_CONTROL_TI_D, r0 /* TI == TLB Invalidate bit */ + mov.l r0, @r1 + + mov.l MSTPCR0_A, r1 /* Address of Power Control Register 0 */ + mov.l MSTPCR0_D, r0 + mov.l r0, @r1 + + mov.l MSTPCR1_A, r1 /*i Address of Power Control Register 1 */ + mov.l MSTPCR1_D, r0 + mov.l r0, @r1 + + mov.l RAMCR_A,r1 + mov.l RAMCR_D,r0 + mov.l r0, @r1 + + mov.l MMSELR_A,r1 + mov.l MMSELR_D,r0 + synco + mov.l r0, @r1 + + mov.l @r1,r2 /* execute two reads after setting MMSELR*/ + mov.l @r1,r2 + synco + + /* issue memory read */ + mov.l DDRSD_START_A,r1 /* memory address to read*/ + mov.l @r1,r0 + synco + + mov.l MIM8_A,r1 + mov.l MIM8_D,r0 + mov.l r0,@r1 + + mov.l MIMC_A,r1 + mov.l MIMC_D1,r0 + mov.l r0,@r1 + + mov.l STRC_A,r1 + mov.l STRC_D,r0 + mov.l r0,@r1 + + mov.l SDR4_A,r1 + mov.l SDR4_D,r0 + mov.l r0,@r1 + + mov.l MIMC_A,r1 + mov.l MIMC_D2,r0 + mov.l r0,@r1 + + nop + nop + nop + + mov.l SCR4_A,r1 + mov.l SCR4_D3,r0 + mov.l r0,@r1 + + mov.l SCR4_A,r1 + mov.l SCR4_D2,r0 + mov.l r0,@r1 + + mov.l SDMR02000_A,r1 + mov.l SDMR02000_D,r0 + mov.l r0,@r1 + + mov.l SDMR00B08_A,r1 + mov.l SDMR00B08_D,r0 + mov.l r0,@r1 + + mov.l SCR4_A,r1 + mov.l SCR4_D2,r0 + mov.l r0,@r1 + + mov.l SCR4_A,r1 + mov.l SCR4_D4,r0 + mov.l r0,@r1 + + nop + nop + nop + nop + + mov.l SCR4_A,r1 + mov.l SCR4_D4,r0 + mov.l r0,@r1 + + nop + nop + nop + nop + + mov.l SDMR00308_A,r1 + mov.l SDMR00308_D,r0 + mov.l r0,@r1 + + mov.l MIMC_A,r1 + mov.l MIMC_D3,r0 + mov.l r0,@r1 + + mov.l SCR4_A,r1 + mov.l SCR4_D1,r0 + mov.l DELAY60_D,r3 + +delay_loop_60: + mov.l r0,@r1 + dt r3 + bf delay_loop_60 + nop + + mov.l CCR_A, r1 /* Address of Cache Control Register */ + mov.l CCR_CACHE_D_2, r0 + mov.l r0, @r1 + +bsc_init: + mov.l BCR_A, r1 + mov.l BCR_D, r0 + mov.l r0, @r1 + + mov.l CS0BCR_A, r1 + mov.l CS0BCR_D, r0 + mov.l r0, @r1 + + mov.l CS1BCR_A,r1 + mov.l CS1BCR_D,r0 + mov.l r0,@r1 + + mov.l CS2BCR_A, r1 + mov.l CS2BCR_D, r0 + mov.l r0, @r1 + + mov.l CS4BCR_A, r1 + mov.l CS4BCR_D, r0 + mov.l r0, @r1 + + mov.l CS5BCR_A, r1 + mov.l CS5BCR_D, r0 + mov.l r0, @r1 + + mov.l CS6BCR_A, r1 + mov.l CS6BCR_D, r0 + mov.l r0, @r1 + + mov.l CS0WCR_A, r1 + mov.l CS0WCR_D, r0 + mov.l r0, @r1 + + mov.l CS1WCR_A, r1 + mov.l CS1WCR_D, r0 + mov.l r0, @r1 + + mov.l CS2WCR_A, r1 + mov.l CS2WCR_D, r0 + mov.l r0, @r1 + + mov.l CS4WCR_A, r1 + mov.l CS4WCR_D, r0 + mov.l r0, @r1 + + mov.l CS5WCR_A, r1 + mov.l CS5WCR_D, r0 + mov.l r0, @r1 + + mov.l CS6WCR_A, r1 + mov.l CS6WCR_D, r0 + mov.l r0, @r1 + + mov.l CS5PCR_A, r1 + mov.l CS5PCR_D, r0 + mov.l r0, @r1 + + mov.l CS6PCR_A, r1 + mov.l CS6PCR_D, r0 + mov.l r0, @r1 + + mov.l DELAY200_D,r3 + +delay_loop_200: + dt r3 + bf delay_loop_200 + nop + + mov.l PSEL0_A,r1 + mov.l PSEL0_D,r0 + mov.w r0,@r1 + + mov.l PSEL1_A,r1 + mov.l PSEL1_D,r0 + mov.w r0,@r1 + + mov.l ICR0_A,r1 + mov.l ICR0_D,r0 + mov.l r0,@r1 + + stc sr, r0 /* BL bit off(init=ON) */ + mov.l SR_MASK_D, r1 + and r1, r0 + ldc r0, sr + + rts + nop + + .align 2 + +DELAY60_D: .long 60 +DELAY200_D: .long 17800 + +CCR_A: .long 0xFF00001C +MMUCR_A: .long 0xFF000010 +RAMCR_A: .long 0xFF000074 + +/* Low power mode control */ +MSTPCR0_A: .long 0xFFC80030 +MSTPCR1_A: .long 0xFFC80038 + +/* RWBT */ +WDTST_A: .long 0xFFCC0000 +WDTCSR_A: .long 0xFFCC0004 +WDTBST_A: .long 0xFFCC0008 + +/* BSC */ +MMSELR_A: .long 0xFE600020 +BCR_A: .long 0xFF801000 +CS0BCR_A: .long 0xFF802000 +CS1BCR_A: .long 0xFF802010 +CS2BCR_A: .long 0xFF802020 +CS4BCR_A: .long 0xFF802040 +CS5BCR_A: .long 0xFF802050 +CS6BCR_A: .long 0xFF802060 +CS0WCR_A: .long 0xFF802008 +CS1WCR_A: .long 0xFF802018 +CS2WCR_A: .long 0xFF802028 +CS4WCR_A: .long 0xFF802048 +CS5WCR_A: .long 0xFF802058 +CS6WCR_A: .long 0xFF802068 +CS5PCR_A: .long 0xFF802070 +CS6PCR_A: .long 0xFF802080 +DDRSD_START_A: .long 0xAC000000 + +/* INTC */ +ICR0_A: .long 0xFFD00000 + +/* DDR I/F */ +MIM8_A: .long 0xFE800008 +MIMC_A: .long 0xFE80000C +SCR4_A: .long 0xFE800014 +STRC_A: .long 0xFE80001C +SDR4_A: .long 0xFE800034 +SDMR00308_A: .long 0xFE900308 +SDMR00B08_A: .long 0xFE900B08 +SDMR02000_A: .long 0xFE902000 + +/* GPIO */ +PSEL0_A: .long 0xFFEF0070 +PSEL1_A: .long 0xFFEF0072 + +CCR_CACHE_ICI_D:.long 0x00000800 +CCR_CACHE_D_2: .long 0x00000103 +MMU_CONTROL_TI_D:.long 0x00000004 +RAMCR_D: .long 0x00000200 +MSTPCR0_D: .long 0x00000000 +MSTPCR1_D: .long 0x00000000 + +MMSELR_D: .long 0xa5a50000 +BCR_D: .long 0x00000000 +CS0BCR_D: .long 0x77777770 +CS1BCR_D: .long 0x77777670 +CS2BCR_D: .long 0x77777670 +CS4BCR_D: .long 0x77777670 +CS5BCR_D: .long 0x77777670 +CS6BCR_D: .long 0x77777670 +CS0WCR_D: .long 0x7777770F +CS1WCR_D: .long 0x22000002 +CS2WCR_D: .long 0x7777770F +CS4WCR_D: .long 0x7777770F +CS5WCR_D: .long 0x7777770F +CS6WCR_D: .long 0x7777770F +CS5PCR_D: .long 0x77000000 +CS6PCR_D: .long 0x77000000 +ICR0_D: .long 0x00E00000 +MIM8_D: .long 0x00000000 +MIMC_D1: .long 0x01d10008 +MIMC_D2: .long 0x01d10009 +MIMC_D3: .long 0x01d10209 +SCR4_D1: .long 0x00000001 +SCR4_D2: .long 0x00000002 +SCR4_D3: .long 0x00000003 +SCR4_D4: .long 0x00000004 +STRC_D: .long 0x000f3980 +SDR4_D: .long 0x00000300 +SDMR00308_D: .long 0x00000000 +SDMR00B08_D: .long 0x00000000 +SDMR02000_D: .long 0x00000000 +PSEL0_D: .long 0x00000001 +PSEL1_D: .long 0x00000244 +SR_MASK_D: .long 0xEFFFFF0F +WDTST_D: .long 0x5A000FFF +WDTCSR_D: .long 0xA5000000 +WDTBST_D: .long 0x55000000 + diff --git a/board/sh7763rdp/sh7763rdp.c b/board/sh7763rdp/sh7763rdp.c new file mode 100644 index 0000000..6f9501b --- /dev/null +++ b/board/sh7763rdp/sh7763rdp.c @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu iwamatsu.nobuhiro@renesas.com + * Copyright (C) 2007 Kenati Technologies, Inc. + * + * board/sh7763rdp/sh7763rdp.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> + +#define CPU_CMDREG 0xB1000006 +#define PDCR 0xffef0006 +#define PECR 0xffef0008 +#define PFCR 0xffef000a +#define PGCR 0xffef000c +#define PHCR 0xffef000e +#define PJCR 0xffef0012 +#define PKCR 0xffef0014 +#define PLCR 0xffef0016 +#define PMCR 0xffef0018 +#define PSEL1 0xffef0072 +#define PSEL2 0xffef0074 +#define PSEL3 0xffef0076 + +int checkboard(void) +{ + puts("BOARD: Renesas SH7763 RDP\n"); + return 0; +} + +int board_init(void) +{ + vu_short dat; + + *(vu_short *)(CPU_CMDREG) |= 0x0001; + + /* GPIO Setting (eth1) */ + dat = *(vu_short *)(PSEL1); + *(vu_short *)PSEL1 = ((dat & ~0xff00) | 0x2400); + *(vu_short *)PFCR = 0; + *(vu_short *)PGCR = 0; + *(vu_short *)PHCR = 0; + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +void led_set_state (unsigned short value) +{ +} diff --git a/board/sh7763rdp/u-boot.lds b/board/sh7763rdp/u-boot.lds new file mode 100644 index 0000000..8f8229b --- /dev/null +++ b/board/sh7763rdp/u-boot.lds @@ -0,0 +1,106 @@ +/* + * Copyrigth (c) 2007,2008 + * Nobuhiro Iwamatsu iwamatsu@nigauri.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + /* + Base address of internal SDRAM is 0x0C000000. + Although size of SDRAM can be either 16 or 32 MBytes, + we assume 16 MBytes (ie ignore upper half if the full + 32 MBytes is present). + + NOTE: This address must match with the definition of + TEXT_BASE in config.mk (in this directory). + + */ + . = 0x8C000000 + (64*1024*1024) - (256*1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh4/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + /* _reloc_dst_end = .; */ + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} + diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h new file mode 100644 index 0000000..d8a760c --- /dev/null +++ b/include/configs/sh7763rdp.h @@ -0,0 +1,129 @@ +/* + * Configuation settings for the Renesas SH7763RDP board + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu iwamatsu.nobuhiro@renesas.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __SH7763RDP_H +#define __SH7763RDP_H + +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7763 1 +#define CONFIG_SH7763RDP 1 +#define __LITTLE_ENDIAN 1 + +/* + * Command line configuration. + */ +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_ENV +#define CONFIG_CMD_NFS +#define CONFIG_CMD_JFFS2 + +#define CONFIG_BOOTDELAY -1 +#define CONFIG_BOOTARGS "console=ttySC2,115200 root=1f01" +#define CONFIG_ENV_OVERWRITE 1 + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* SCIF */ +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_SCIF2 1 + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Buffer size for input from the Console */ +#define CFG_PBSIZE 256 /* Buffer size for Console output */ +#define CFG_MAXARGS 16 /* max args accepted for monitor commands */ +#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments + passed to kernel */ +#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate + settings for this board */ + +/* Ethernet */ +#define CONFIG_SH_ETHER 1 +#define CONFIG_SH_ETHER_USE_PORT (1) +#define CONFIG_SH_ETHER_PHY_ADDR (0x01) +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.0.63 +#define CONFIG_SERVERIP 192.168.0.1 +#define CFG_RX_ETH_BUFFER (8) + +/* SDRAM */ +#define CFG_SDRAM_BASE (0x8C000000) +#define CFG_SDRAM_SIZE (64 * 1024 * 1024) +#define CFG_MEMTEST_START (CFG_SDRAM_BASE) +#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024)) + +/* Flash(NOR) */ +#define CFG_FLASH_BASE (0xA0000000) +#define CFG_FLASH_CFI_WIDTH (FLASH_CFI_16BIT) +#define CFG_MAX_FLASH_BANKS (1) +#define CFG_MAX_FLASH_SECT (520) + +/* U-boot setting */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) +#define CFG_MONITOR_BASE (CFG_FLASH_BASE) +#define CFG_MONITOR_LEN (128 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CFG_MALLOC_LEN (1024 * 1024) +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#undef CFG_FLASH_QUIET_TEST +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +/* Timeout for Flash erase operations (in ms) */ +#define CFG_FLASH_ERASE_TOUT (3 * 1000) +/* Timeout for Flash write operations (in ms) */ +#define CFG_FLASH_WRITE_TOUT (3 * 1000) +/* Timeout for Flash set sector lock bit operations (in ms) */ +#define CFG_FLASH_LOCK_TOUT (3 * 1000) +/* Timeout for Flash clear lock bit operations (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) +/* Use hardware flash sectors protection instead of U-Boot software protection */ +#undef CFG_FLASH_PROTECTION +#undef CFG_DIRECT_FLASH_TFTP +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE (128 * 1024) +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + (1 * CFG_ENV_SECT_SIZE)) +/* Offset of env Flash sector relative to CFG_FLASH_BASE */ +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR_REDUND (CFG_FLASH_BASE + (2 * CFG_ENV_SECT_SIZE)) + +/* Clock */ +#define CONFIG_SYS_CLK_FREQ 66666666 +#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +#endif /* __SH7763RDP_H */