On 24.03.19 12:27, Baruch Siach wrote:

This allows the ahci_mvebu driver to do A38x platform specific configuration at initialization.

Signed-off-by: Baruch Siach baruch@tkos.co.il

arch/arm/mach-mvebu/cpu.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 919d05c88c77..5d3f553b5dd3 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -501,7 +501,6 @@ int board_mmc_init(bd_t *bis) } #endif

-#ifdef CONFIG_SCSI_AHCI_PLAT #define AHCI_VENDOR_SPECIFIC_0_ADDR 0xa0 #define AHCI_VENDOR_SPECIFIC_0_DATA 0xa4

@@ -545,11 +544,19 @@ static void ahci_mvebu_regret_option(void __iomem *base) writel(0x80, base + AHCI_VENDOR_SPECIFIC_0_DATA); }

-void scsi_init(void) +int board_ahci_enable(void) {

• printf("MVEBU SATA INIT\n"); ahci_mvebu_mbus_config((void __iomem *)MVEBU_SATA0_BASE); ahci_mvebu_regret_option((void __iomem *)MVEBU_SATA0_BASE);

• return 0;

+}

+#ifdef CONFIG_SCSI_AHCI_PLAT +void scsi_init(void) +{

• printf("MVEBU SATA INIT\n");
• board_ahci_enable(); ahci_init((void __iomem *)MVEBU_SATA0_BASE); } #endif

Reviewed-by: Stefan Roese sr@denx.de

Thanks, Stefan