MPC837xE specs says that SerDes1 has:

— Two lanes running x1 SGMII at 1.25 Gbps; — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.

And for SerDes2:

— Two lanes running x1 PCI Express at 2.5 Gbps; — One lane running x2 PCI Express at 2.5 Gbps; — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.

The spec also explicitly states that PEX options are not valid for the SD1.

Nevertheless MPC8378 RDB and MDS boards configure the SD1 for PEX, which is wrong to do.

Signed-off-by: Anton Vorontsov avorontsov@ru.mvista.com --- board/freescale/mpc837xemds/mpc837xemds.c | 2 +- board/freescale/mpc837xerdb/mpc837xerdb.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c index 40f1e63..581397d 100644 --- a/board/freescale/mpc837xemds/mpc837xemds.c +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -44,7 +44,7 @@ int board_early_init_f(void) FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; case SPR_8378: - fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; case SPR_8379: diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index aaefc18..3eb53d8 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -148,7 +148,7 @@ int board_early_init_f(void) FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; case SPR_8378: - fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; case SPR_8379: