[PATCH 1/2] ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano
From: Thierry Reding treding@nvidia.com
This command is useful to power off the system from within U-Boot.
Signed-off-by: Thierry Reding treding@nvidia.com --- configs/p2371-2180_defconfig | 1 + configs/p3450-0000_defconfig | 1 + 2 files changed, 2 insertions(+)
diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig index ea62e18f7384..f99c0bf6e39f 100644 --- a/configs/p2371-2180_defconfig +++ b/configs/p2371-2180_defconfig @@ -27,6 +27,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y +CONFIG_CMD_POWEROFF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y diff --git a/configs/p3450-0000_defconfig b/configs/p3450-0000_defconfig index 8e16afde9135..0c5a2835fd69 100644 --- a/configs/p3450-0000_defconfig +++ b/configs/p3450-0000_defconfig @@ -28,6 +28,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y +CONFIG_CMD_POWEROFF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y
From: Thierry Reding treding@nvidia.com
This command is useful to power off the system from within U-Boot.
Signed-off-by: Thierry Reding treding@nvidia.com --- configs/p2771-0000-000_defconfig | 1 + configs/p2771-0000-500_defconfig | 1 + 2 files changed, 2 insertions(+)
diff --git a/configs/p2771-0000-000_defconfig b/configs/p2771-0000-000_defconfig index 682be7d602c9..b769a62efe52 100644 --- a/configs/p2771-0000-000_defconfig +++ b/configs/p2771-0000-000_defconfig @@ -23,6 +23,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y +CONFIG_CMD_POWEROFF=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y diff --git a/configs/p2771-0000-500_defconfig b/configs/p2771-0000-500_defconfig index c5925b18c9f2..421b6b815b0f 100644 --- a/configs/p2771-0000-500_defconfig +++ b/configs/p2771-0000-500_defconfig @@ -23,6 +23,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y +CONFIG_CMD_POWEROFF=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y
participants (1)
-
Thierry Reding