The sama5d2 Xplained SPL supports the boot medias: spi flash and SD Card.

Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---

arch/arm/mach-at91/Kconfig | 1 + arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/include/mach/sama5d2.h | 32 +++++++ board/atmel/sama5d2_xplained/sama5d2_xplained.c | 103 +++++++++++++++++++++++ configs/sama5d2_xplained_mmc_defconfig | 1 + configs/sama5d2_xplained_spiflash_defconfig | 1 + include/configs/sama5d2_xplained.h | 39 +++++++++ 7 files changed, 178 insertions(+)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index c333647..9426302b 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -74,6 +74,7 @@ config TARGET_AT91SAM9X5EK config TARGET_SAMA5D2_XPLAINED bool "SAMA5D2 Xplained board" select CPU_V7 + select SUPPORT_SPL

config TARGET_SAMA5D3_XPLAINED bool "SAMA5D3 Xplained board" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 5b89617..abd1d13 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_AT91SAM9G20) += sdram.o spl_at91.o obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o obj-$(CONFIG_AT91SAM9N12) += mpddrc.o spl_at91.o obj-$(CONFIG_AT91SAM9X5) += mpddrc.o spl_at91.o +obj-$(CONFIG_SAMA5D2) += mpddrc.o spl_atmel.o matrix.o atmel_sfr.o obj-$(CONFIG_SAMA5D3) += mpddrc.o spl_atmel.o obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o matrix.o atmel_sfr.o obj-y += spl.o diff --git a/arch/arm/mach-at91/include/mach/sama5d2.h b/arch/arm/mach-at91/include/mach/sama5d2.h index c85571c..dd5a2a7 100644 --- a/arch/arm/mach-at91/include/mach/sama5d2.h +++ b/arch/arm/mach-at91/include/mach/sama5d2.h @@ -106,6 +106,7 @@ #define ATMEL_BASE_MPDDRC 0xf000c000 #define ATMEL_BASE_XDMAC0 0xf0010000 #define ATMEL_BASE_PMC 0xf0014000 +#define ATMEL_BASE_MATRIX0 0xf0018000 #define ATMEL_BASE_QSPI0 0xf0020000 #define ATMEL_BASE_QSPI1 0xf0024000 #define ATMEL_BASE_SPI0 0xf8000000 @@ -117,6 +118,7 @@ #define ATMEL_BASE_UART1 0xf8020000 #define ATMEL_BASE_UART2 0xf8024000 #define ATMEL_BASE_TWI0 0xf8028000 +#define ATMEL_BASE_SFR 0xf8030000 #define ATMEL_BASE_SYSC 0xf8048000 #define ATMEL_BASE_SPI1 0xfc000000 #define ATMEL_BASE_UART3 0xfc008000 @@ -125,6 +127,7 @@ #define ATMEL_BASE_UDPHS 0xfc02c000

#define ATMEL_BASE_PIOA 0xfc038000 +#define ATMEL_BASE_MATRIX1 0xfc03c000

#define ATMEL_CHIPID_CIDR 0xfc069000 #define ATMEL_CHIPID_EXID 0xfc069004 @@ -171,6 +174,35 @@ #define CPU_HAS_PCR #define CPU_HAS_H32MXDIV

+/* AICREDIR Unlock Key */ +#define ATMEL_SFR_AICREDIR_KEY 0xB6D81C4D + +/* MATRIX0(H64MX) slave id definitions */ +#define H64MX_SLAVE_AXIMX_BRIDGE 0 /* Bridge from H64MX to AXIMX */ +#define H64MX_SLAVE_PERIPH_BRIDGE 1 /* H64MX Peripheral Bridge */ +#define H64MX_SLAVE_DDRC_PORT0 2 /* DDR2 Port0-AESOTF */ +#define H64MX_SLAVE_DDRC_PORT1 3 /* DDR2 Port1 */ +#define H64MX_SLAVE_DDRC_PORT2 4 /* DDR2 Port2 */ +#define H64MX_SLAVE_DDRC_PORT3 5 /* DDR2 Port3 */ +#define H64MX_SLAVE_DDRC_PORT4 6 /* DDR2 Port4 */ +#define H64MX_SLAVE_DDRC_PORT5 7 /* DDR2 Port5 */ +#define H64MX_SLAVE_DDRC_PORT6 8 /* DDR2 Port6 */ +#define H64MX_SLAVE_DDRC_PORT7 9 /* DDR2 Port7 */ +#define H64MX_SLAVE_SRAM 10 /* Internal SRAM 128K */ +#define H64MX_SLAVE_CACHE_L2 11 /* Internal SRAM 128K(L2) */ +#define H64MX_SLAVE_QSPI0 12 /* QSPI0 */ +#define H64MX_SLAVE_QSPI1 13 /* QSPI1 */ +#define H64MX_SLAVE_AESB 14 /* AESB */ + +/* MATRIX1(H32MX) slave id definitions */ +#define H32MX_SLAVE_H64MX_BRIDGE 0 /* Bridge from H32MX to H64MX */ +#define H32MX_SLAVE_PERIPH_BRIDGE0 1 /* H32MX Peripheral Bridge 0 */ +#define H32MX_SLAVE_PERIPH_BRIDGE1 2 /* H32MX Peripheral Bridge 1 */ +#define H32MX_SLAVE_EBI 3 /* External Bus Interface */ +#define H32MX_SLAVE_NFC_CMD 3 /* NFC command Register */ +#define H32MX_SLAVE_NFC_SRAM 4 /* NFC SRAM */ +#define H32MX_SLAVE_USB 5 /* USB Device & Host */ + /* SAMA5D2 series chip id definitions */ #define ARCH_ID_SAMA5D2 0x8a5c08c0 #define ARCH_EXID_SAMA5D21CU 0x0000005a diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c index 0b3397f..e0dc9ed 100644 --- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c +++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c @@ -17,6 +17,7 @@ #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/atmel_pio4.h> +#include <asm/arch/atmel_mpddrc.h> #include <asm/arch/atmel_usba_udc.h> #include <asm/arch/atmel_sdhci.h> #include <asm/arch/clk.h> @@ -281,3 +282,105 @@ int board_eth_init(bd_t *bis)

return rc; } + +/* SPL */ +#ifdef CONFIG_SPL_BUILD +void spl_board_init(void) +{ +#ifdef CONFIG_SYS_USE_SERIALFLASH + board_spi0_hw_init(); +#endif +#ifdef CONFIG_ATMEL_SDHCI +#ifdef CONFIG_ATMEL_SDHCI0 + board_sdhci0_hw_init(); +#endif +#ifdef CONFIG_ATMEL_SDHCI1 + board_sdhci1_hw_init(); +#endif +#endif +} + +static void ddrc_conf(struct atmel_mpddrc_config *ddrc) +{ + ddrc->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR3_SDRAM); + + ddrc->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | + ATMEL_MPDDRC_CR_NR_ROW_14 | + ATMEL_MPDDRC_CR_CAS_DDR_CAS5 | + ATMEL_MPDDRC_CR_DIC_DS | + ATMEL_MPDDRC_CR_DIS_DLL | + ATMEL_MPDDRC_CR_NB_8BANKS | + ATMEL_MPDDRC_CR_DECOD_INTERLEAVED | + ATMEL_MPDDRC_CR_UNAL_SUPPORTED); + + ddrc->rtr = 0x511; + + ddrc->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET | + 3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET | + 4 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | + 9 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | + 3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | + 4 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | + 4 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | + 4 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); + + ddrc->tpr1 = (27 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET | + 29 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | + 0 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | + 3 << ATMEL_MPDDRC_TPR1_TXP_OFFSET); + + ddrc->tpr2 = (0 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET | + 0 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | + 0 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | + 4 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | + 7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET); +} + +void mem_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC; + struct atmel_mpddrc_config ddrc_config; + u32 reg; + + ddrc_conf(&ddrc_config); + + at91_periph_clk_enable(ATMEL_ID_MPDDRC); + writel(AT91_PMC_DDR, &pmc->scer); + + reg = readl(&mpddrc->io_calibr); + reg &= ~ATMEL_MPDDRC_IO_CALIBR_RDIV; + reg |= ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_55; + reg &= ~ATMEL_MPDDRC_IO_CALIBR_TZQIO; + reg |= ATMEL_MPDDRC_IO_CALIBR_TZQIO_(100); + writel(reg, &mpddrc->io_calibr); + + writel(ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_TWO_CYCLE, + &mpddrc->rd_data_path); + + ddr3_init(ATMEL_BASE_DDRCS, &ddrc_config); + + writel(0x3, &mpddrc->cal_mr4); + writel(64, &mpddrc->tim_cal); +} + +void at91_pmc_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 tmp; + + tmp = AT91_PMC_PLLAR_29 | + AT91_PMC_PLLXR_PLLCOUNT(0x3f) | + AT91_PMC_PLLXR_MUL(82) | + AT91_PMC_PLLXR_DIV(1); + at91_plla_init(tmp); + + writel(0x0 << 8, &pmc->pllicpr); + + tmp = AT91_PMC_MCKR_H32MXDIV | + AT91_PMC_MCKR_PLLADIV_2 | + AT91_PMC_MCKR_MDIV_3 | + AT91_PMC_MCKR_CSS_PLLA; + at91_mck_init(tmp); +} +#endif diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig index c1dcbef..75b1713 100644 --- a/configs/sama5d2_xplained_mmc_defconfig +++ b/configs/sama5d2_xplained_mmc_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_SAMA5D2_XPLAINED=y +CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC" # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig index 0271e8e..6d61a7e 100644 --- a/configs/sama5d2_xplained_spiflash_defconfig +++ b/configs/sama5d2_xplained_spiflash_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_SAMA5D2_XPLAINED=y +CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index ae5ba3d..272257e 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -25,8 +25,12 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS #define CONFIG_SYS_SDRAM_SIZE 0x20000000

+#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x210000 +#else #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif

#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */

@@ -119,4 +123,39 @@

#endif

+/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x200000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_SERIALFLASH +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 + +#endif + #endif