Re: [U-Boot] [PATCH] USB: S5P: Add ehci support
Dear RAJESHWARI S SHINDE,
Hi Marek,
Thank you for the comments, would modify the code and send V2.
Thank you for your patches and your work, they are what's important here :-)
Regards, Rajeshwari Shinde.
------- Original Message ------- Sender : Marek Vasutmarex@denx.de Date : May 02, 2012 06:17 (GMT+09:00) Title : Re: [U-Boot] [PATCH] USB: S5P: Add ehci support
Dear Rajeshwari Shinde,
This patch adds ehci driver support for s5p.
It'd be awesome if you CCed me ;-) Also, it might be worth CCing Lukasz?
Signed-off-by: Vivek Gautam Signed-off-by: Rajeshwari Shinde
arch/arm/include/asm/arch-exynos/ehci-s5p.h | 66 ++++++++++++++++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-s5p.c | 113
+++++++++++++++++++++++++++ 3 files changed, 180 insertions(+), 0 deletions(-)
create mode 100755 arch/arm/include/asm/arch-exynos/ehci-s5p.h create mode 100644 drivers/usb/host/ehci-s5p.c
diff --git a/arch/arm/include/asm/arch-exynos/ehci-s5p.h b/arch/arm/include/asm/arch-exynos/ehci-s5p.h new file mode 100755 index 0000000..68feb85 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/ehci-s5p.h @@ -0,0 +1,66 @@ +/*
- SAMSUNG S5P USB HOST EHCI Controller
- Copyright (C) 2012 Samsung Electronics Co.Ltd
- Vivek Gautam
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA
- */
+#ifndef __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__ +#define __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
+#define CLK_24MHZ 5
+#define HOST_CTRL0_PHYSWRSTALL (1 << 31) +#define HOST_CTRL0_COMMONON_N (1 << 9) +#define HOST_CTRL0_SIDDQ (1 << 6) +#define HOST_CTRL0_FORCESLEEP (1 << 5) +#define HOST_CTRL0_FORCESUSPEND (1 << 4) +#define HOST_CTRL0_WORDINTERFACE (1 << 3) +#define HOST_CTRL0_UTMISWRST (1 << 2) +#define HOST_CTRL0_LINKSWRST (1 << 1) +#define HOST_CTRL0_PHYSWRST (1 << 0)
+#define HOST_CTRL0_FSEL_MASK (7 << 16)
+#define EHCICTRL_ENAINCRXALIGN (1 << 29) +#define EHCICTRL_ENAINCR4 (1 << 28) +#define EHCICTRL_ENAINCR8 (1 << 27) +#define EHCICTRL_ENAINCR16 (1 << 26)
+/* Register map for PHY control */ +struct s5p_usb_phy {
- unsigned int usbphyctrl0;
- unsigned int usbphytune0;
- unsigned int reserved1[2];
- unsigned int hsicphyctrl1;
- unsigned int hsicphytune1;
- unsigned int reserved2[2];
- unsigned int hsicphyctrl2;
- unsigned int hsicphytune2;
- unsigned int reserved3[2];
- unsigned int ehcictrl;
- unsigned int ohcictrl;
- unsigned int usbotgsys;
- unsigned int reserved4;
- unsigned int usbotgtune;
+};
+/* Switch on the VBUS power. */ +int board_usb_vbus_init(void);
+#endif /* __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__ */ diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 0d4657e..59c3e57 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -50,6 +50,7 @@ COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o COBJS-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
+COBJS-$(CONFIG_USB_EHCI_S5P) += ehci-s5p.o
COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c new file mode 100644 index 0000000..ac9f061 --- /dev/null +++ b/drivers/usb/host/ehci-s5p.c @@ -0,0 +1,113 @@ +/*
- SAMSUNG S5P USB HOST EHCI Controller
- Copyright (C) 2012 Samsung Electronics Co.Ltd
- Vivek Gautam
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA
- */
+#include +#include +#include +#include +#include "ehci.h" +#include "ehci-core.h"
+/* Setup the EHCI host controller. */ +static void setup_usb_phy(struct s5p_usb_phy *usb) +{
- unsigned int hostphy_ctrl0;
- /* Setting up host and device simultaneously */
- hostphy_ctrl0 = readl(&usb->usbphyctrl0);
- hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK |
- HOST_CTRL0_COMMONON_N |
- /* HOST Phy setting */
- HOST_CTRL0_PHYSWRST |
- HOST_CTRL0_PHYSWRSTALL |
- HOST_CTRL0_SIDDQ |
- HOST_CTRL0_FORCESUSPEND |
- HOST_CTRL0_FORCESLEEP);
- hostphy_ctrl0 |= (/* Setting up the ref freq */
- CLK_24MHZ << 16 |
Parens around (CLK << 16). -- Corrected
- /* HOST Phy setting */
- HOST_CTRL0_LINKSWRST |
- HOST_CTRL0_UTMISWRST);
- writel(hostphy_ctrl0, &usb->usbphyctrl0);
Use clrsetbits_le32() please. -- Corrected
- udelay(10);
- clrbits_le32(&usb->usbphyctrl0,
- HOST_CTRL0_LINKSWRST |
- HOST_CTRL0_UTMISWRST);
- udelay(20);
- /* EHCI Ctrl setting */
- setbits_le32(&usb->ehcictrl,
- EHCICTRL_ENAINCRXALIGN |
- EHCICTRL_ENAINCR4 |
- EHCICTRL_ENAINCR8 |
- EHCICTRL_ENAINCR16);
+}
+/* Reset the EHCI host controller. */ +static void reset_usb_phy(struct s5p_usb_phy *usb) +{
- /* HOST_PHY reset */
- setbits_le32(&usb->usbphyctrl0,
- HOST_CTRL0_PHYSWRST |
- HOST_CTRL0_PHYSWRSTALL |
- HOST_CTRL0_SIDDQ |
- HOST_CTRL0_FORCESUSPEND |
- HOST_CTRL0_FORCESLEEP);
+}
+/*
- EHCI-initialization
- Create the appropriate control structures to manage
- a new EHCI host controller.
- */
+int ehci_hcd_init(void) +{
- struct s5p_usb_phy *usb;
- usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
- setup_usb_phy(usb);
- hccr = (struct ehci_hccr *)(EXYNOS5_USB_HOST_EHCI_BASE);
- hcor = (struct ehci_hcor *)((uint32_t) hccr
- HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
- printf("\n usb cmd addr = %x", &hcor->or_usbcmd);
Either debug() or remove the above ;-) -- Removed
- debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
- (uint32_t)hccr, (uint32_t)hcor,
- (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
- return 0;
+}
+/*
- Destroy the appropriate control structures corresponding
- the EHCI host controller.
- */
+int ehci_hcd_stop() +{
- struct s5p_usb_phy *usb;
- usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
- reset_usb_phy(usb);
Well ... if reseting the PHY is enough to stop the controller, I won't object ;-) ---- Verified the user manual and this seems to be enough to reset the host controller.
This patch gives a good impression, I see V2 and then mainline acceptance :)
- return 0;
+}
participants (1)
-
Marek Vasut