[U-Boot] [PATCH] EXYNOS: Correct ordering of SPL machine_params
From: Simon Glass sjg@chromium.org
The mem_manuf is not in the correct order according to the string table. This causes cros_bundle_firmware to get the BL2 settings in the wrong order. This patch fixes the same.
Signed-off-by: Simon Glass sjg@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com --- arch/arm/include/asm/arch-exynos/spl.h | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/arch/arm/include/asm/arch-exynos/spl.h b/arch/arm/include/asm/arch-exynos/spl.h index 306b41d..46b25a6 100644 --- a/arch/arm/include/asm/arch-exynos/spl.h +++ b/arch/arm/include/asm/arch-exynos/spl.h @@ -78,11 +78,12 @@ struct spl_machine_param { */ u32 uboot_size; enum boot_mode boot_source; /* Boot device */ - enum mem_manuf mem_manuf; /* Memory Manufacturer */ unsigned frequency_mhz; /* Frequency of memory in MHz */ unsigned arm_freq_mhz; /* ARM Frequency in MHz */ u32 serial_base; /* Serial base address */ u32 i2c_base; /* i2c base address */ + u32 board_rev_gpios; /* Board revision GPIOs */ + enum mem_manuf mem_manuf; /* Memory Manufacturer */ } __attribute__((__packed__)); #endif
On Mon, Feb 18, 2013 at 10:32 PM, Rajeshwari Shinde rajeshwari.s@samsung.com wrote:
From: Simon Glass sjg@chromium.org
The mem_manuf is not in the correct order according to the string table. This causes cros_bundle_firmware to get the BL2 settings in the wrong order. This patch fixes the same.
Signed-off-by: Simon Glass sjg@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
Acked-by: Simon Glass sjg@chromium.org
arch/arm/include/asm/arch-exynos/spl.h | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/arch/arm/include/asm/arch-exynos/spl.h b/arch/arm/include/asm/arch-exynos/spl.h index 306b41d..46b25a6 100644 --- a/arch/arm/include/asm/arch-exynos/spl.h +++ b/arch/arm/include/asm/arch-exynos/spl.h @@ -78,11 +78,12 @@ struct spl_machine_param { */ u32 uboot_size; enum boot_mode boot_source; /* Boot device */
enum mem_manuf mem_manuf; /* Memory Manufacturer */ unsigned frequency_mhz; /* Frequency of memory in MHz */ unsigned arm_freq_mhz; /* ARM Frequency in MHz */ u32 serial_base; /* Serial base address */ u32 i2c_base; /* i2c base address */
u32 board_rev_gpios; /* Board revision GPIOs */enum mem_manuf mem_manuf; /* Memory Manufacturer */} __attribute__((__packed__)); #endif
-- 1.7.4.4
On 19/02/13 15:32, Rajeshwari Shinde wrote:
From: Simon Glass sjg@chromium.org
The mem_manuf is not in the correct order according to the string table. This causes cros_bundle_firmware to get the BL2 settings in the wrong order. This patch fixes the same.
Signed-off-by: Simon Glass sjg@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
arch/arm/include/asm/arch-exynos/spl.h | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/arch/arm/include/asm/arch-exynos/spl.h b/arch/arm/include/asm/arch-exynos/spl.h index 306b41d..46b25a6 100644 --- a/arch/arm/include/asm/arch-exynos/spl.h +++ b/arch/arm/include/asm/arch-exynos/spl.h @@ -78,11 +78,12 @@ struct spl_machine_param { */ u32 uboot_size; enum boot_mode boot_source; /* Boot device */
- enum mem_manuf mem_manuf; /* Memory Manufacturer */ unsigned frequency_mhz; /* Frequency of memory in MHz */ unsigned arm_freq_mhz; /* ARM Frequency in MHz */ u32 serial_base; /* Serial base address */ u32 i2c_base; /* i2c base address */
- u32 board_rev_gpios; /* Board revision GPIOs */
- enum mem_manuf mem_manuf; /* Memory Manufacturer */
} __attribute__((__packed__)); #endif
applied to u-boot-samsung.
Thanks, Minkyu Kang.
participants (3)
-
Minkyu Kang -
Rajeshwari Shinde -
Simon Glass