[U-Boot] u-boot problem for M501 Board after u-boot-2009
Hi friends, we have bought an IPAC-5010 Board from Artila which is based on M501sk... We need to change the partition table for flash which requires MTDPARTS support inside u-boot and which is supported after version u-boot-2009.06... I have downloaded many u-boot versions and realized that there were no problems until version u-boot-2008.10 however I could not manage to boot the board with versions after u-boot-2009.01... After flashing the board and giving power to the board, all I see is two dots and everything stops afterwards... Has anyone already managed to run u-boot-2009.06 or higher versions (which includes MTDPARTS support) on board M501sk ???
Regards.. Mursel
Dear =?ISO-8859-9?Q?m=FCrsel_y=FDld=FDz?=,
In message AANLkTikqS5QwfIMFZbtkSgQqrmhU3VRvENUAZ7VY4oIO@mail.gmail.com you wrote:
we have bought an IPAC-5010 Board from Artila which is based on M501sk... We need to change the partition table for flash which requires MTDPARTS support inside u-boot and which is supported after version u-boot-2009.06... I have downloaded many u-boot versions and realized that there were no problems until version u-boot-2008.10 however I could not manage to boot the board with versions after u-boot-2009.01... After flashing the board and giving power to the board, all I see is two dots and everything stops afterwards... Has anyone already managed to run u-boot-2009.06 or higher versions (which includes MTDPARTS support) on board M501sk ???
Sorry, I cannot help. but you can use "git bisect" to easily find out which specific commit breaks the support for the M501 board - once we know this, we might come up with ideas for a fix.
Best regards,
Wolfgang Denk
participants (2)
-
mürsel yıldız -
Wolfgang Denk