[PATCH] arm: Other boards should not show this option in menuconfig
From: Liya Huang 1425075683@qq.com
When I was using STM32 board, this option appeared in menuconfig and caused me trouble. I found that arch/arm/mach-imx/imx8/Kconfig already excludes using if endif. I don't know why other boards are displayed. I used the following command: export CROSS_COMPILE=arm-none-eabi- ARCH=arm make stm32h750-art-pi_defconfig make menuconfig
Signed-off-by: Liya Huang 1425075683@qq.com ---
board/siemens/common/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/board/siemens/common/Kconfig b/board/siemens/common/Kconfig index 4ae12b1c973..800eb8dd1c1 100644 --- a/board/siemens/common/Kconfig +++ b/board/siemens/common/Kconfig @@ -3,4 +3,5 @@ config FACTORYSET
config DDR_SI_TEST bool "DDR signal integrity test implementations" + depends on ARCH_IMX8 default y
Hello,
On 28.01.25 14:45, 1425075683@qq.com wrote:
From: Liya Huang 1425075683@qq.com
When I was using STM32 board, this option appeared in menuconfig and caused me trouble. I found that arch/arm/mach-imx/imx8/Kconfig already excludes using if endif. I don't know why other boards are displayed. I used the following command: export CROSS_COMPILE=arm-none-eabi- ARCH=arm make stm32h750-art-pi_defconfig make menuconfig
Signed-off-by: Liya Huang 1425075683@qq.com
board/siemens/common/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/board/siemens/common/Kconfig b/board/siemens/common/Kconfig index 4ae12b1c973..800eb8dd1c1 100644 --- a/board/siemens/common/Kconfig +++ b/board/siemens/common/Kconfig @@ -3,4 +3,5 @@ config FACTORYSET
config DDR_SI_TEST bool "DDR signal integrity test implementations"
- depends on ARCH_IMX8 default y
I think we can even more restrict this to
TARGET_CAPRICORN
Thanks!
bye, Heiko
participants (2)
-
1425075683＠qq.com -
Heiko Schocher