[PATCH 2/2] board: dh_stm32mp1: Only print board code with CONFIG_SPL_DISPLAY_PRINT
Ensure that the SoM and board code information is only printed when CONFIG_SPL_DISPLAY_PRINT is set.
Signed-off-by: Harald Seiler hws@denx.de --- board/dhelectronics/dh_stm32mp1/board.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c index f9cfabe2420..b933761d0de 100644 --- a/board/dhelectronics/dh_stm32mp1/board.c +++ b/board/dhelectronics/dh_stm32mp1/board.c @@ -229,8 +229,9 @@ static void board_get_coding_straps(void)
gpio_free_list_nodev(gpio, ret);
- printf("Code: SoM:rev=%d,ddr3=%d Board:rev=%d\n", - somcode, ddr3code, brdcode); + if (CONFIG_IS_ENABLED(DISPLAY_PRINT)) + printf("Code: SoM:rev=%d,ddr3=%d Board:rev=%d\n", + somcode, ddr3code, brdcode); }
int board_stm32mp1_ddr_config_name_match(struct udevice *dev,
On 9/27/23 14:46, Harald Seiler wrote:
Ensure that the SoM and board code information is only printed when CONFIG_SPL_DISPLAY_PRINT is set.
Signed-off-by: Harald Seiler hws@denx.de
Reviewed-by: Marek Vasut marex@denx.de
On 9/30/23 23:02, Marek Vasut wrote:
On 9/27/23 14:46, Harald Seiler wrote:
Ensure that the SoM and board code information is only printed when CONFIG_SPL_DISPLAY_PRINT is set.
Signed-off-by: Harald Seiler hws@denx.de
Reviewed-by: Marek Vasut marex@denx.de
Apply on stm32/next
Thanks
On 10/4/23 11:19, Patrice CHOTARD wrote:
On 9/30/23 23:02, Marek Vasut wrote:
On 9/27/23 14:46, Harald Seiler wrote:
Ensure that the SoM and board code information is only printed when CONFIG_SPL_DISPLAY_PRINT is set.
Signed-off-by: Harald Seiler hws@denx.de
Reviewed-by: Marek Vasut marex@denx.de
Apply on stm32/next
This all should be on master, since we're way before 2024.01-rc1 now , 2023.10 was just released on Monday.
On 10/4/23 13:41, Marek Vasut wrote:
On 10/4/23 11:19, Patrice CHOTARD wrote:
On 9/30/23 23:02, Marek Vasut wrote:
On 9/27/23 14:46, Harald Seiler wrote:
Ensure that the SoM and board code information is only printed when CONFIG_SPL_DISPLAY_PRINT is set.
Signed-off-by: Harald Seiler hws@denx.de
Reviewed-by: Marek Vasut marex@denx.de
Apply on stm32/next
This all should be on master, since we're way before 2024.01-rc1 now , 2023.10 was just released on Monday.
Hi Marek
Yes it was my intention, thanks for checking ;-)
Patrice
On 10/4/23 15:39, Patrice CHOTARD wrote:
On 10/4/23 13:41, Marek Vasut wrote:
On 10/4/23 11:19, Patrice CHOTARD wrote:
On 9/30/23 23:02, Marek Vasut wrote:
On 9/27/23 14:46, Harald Seiler wrote:
Ensure that the SoM and board code information is only printed when CONFIG_SPL_DISPLAY_PRINT is set.
Signed-off-by: Harald Seiler hws@denx.de
Reviewed-by: Marek Vasut marex@denx.de
Apply on stm32/next
This all should be on master, since we're way before 2024.01-rc1 now , 2023.10 was just released on Monday.
Hi Marek
Yes it was my intention, thanks for checking ;-)
You're welcome.
participants (3)
-
Harald Seiler -
Marek Vasut -
Patrice CHOTARD