The two boards aren't really that far apart, and AFAICT the USB ports are set up the same way, from looking at the schematics.

I have successfully loaded u-boot and done things with the flash devices that are on board without problems in the past, as well.

I'll look again for differences, I guess.

Assuming it's not an issue in the configuration, what should I be configuring the USB support to handle? I noticed in looking at some of the debug logged that there are SCSI devices identified. Should I enable SCSI support?

Thanks again, and regards,

Matt

-----Original Message----- From: wd@denx.de [mailto:wd@denx.de] Sent: Wednesday, March 07, 2007 3:40 PM To: Matt Gessner Cc: u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] USB storage support question

In message 131AF8573CF31945B5B11E4201D3F1E142BB56@mail3.Avidyne.com

you

wrote:

...

I have the AT91RM9200EK board, and I want to do something with the

USB

...

host ports on the board, so I've put the following in my

at91rm9200dk.h

...

config file:

The at91rm9200dk.h configuration is for the DK board, not the EK.

Are you sure this can work?

Best regards,

Wolfgang Denk

-- DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk Office: Kirchenstr. 5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de "I haven't lost my mind - it's backed up on tape somewhere."