[U-Boot] Location of Titanium board
Hi Stefan,
Since mx6 titanium board is not one designed by Freescale, shouldn't it be removed to a proper board/<vendor> directory?
Regards,
Fabio Estevam
Hi Fabio,
On 04.11.2013 01:14, Fabio Estevam wrote:
Since mx6 titanium board is not one designed by Freescale, shouldn't it be removed to a proper board/<vendor> directory?
Yes, would make sense. At the time I worked on this BSP, nearly all mx6 boards were placed in the freescale board directory. I'll create a patch to move this BSP into a barco board directory instead.
Thanks, Stefan
"Stefan" == Stefan Roese sr@denx.de writes:
Hi,
Stefan> Yes, would make sense. At the time I worked on this BSP, nearly all mx6 Stefan> boards were placed in the freescale board directory. I'll create a patch Stefan> to move this BSP into a barco board directory instead.
Sounds good, thanks.
-- Bye, Peter Korsgaard This message is subject to the following terms and conditions: MAIL DISCLAIMERhttp://www.barco.com/en/maildisclaimer
participants (3)
-
Fabio Estevam -
Peter Korsgaard -
Stefan Roese