Dear all,

I've successfully compiled and running u-boot on the Bananapi R1 board using the instructions in http://linux-sunxi.org/Mainline_U-boot#Compile_U-Boot

This board uses a *BCM 53125* ethernet chip

4+1 ports 10/100/1000 Ethernet RJ45 (BCM 53125), WLAN @802.11b/g/n (RTL8192CU) with 2x external antennas connectors

But when I any try to run any NETWORK related command - i'm getting a "*No Link*". I do have the ip add, gateway addr, net mask etc set as environment variables.

sunxi# ping 192.168.10.1

ethernet@01c50000 Waiting for PHY auto negotiation to complete......... TIMEOUT !

ethernet@01c50000: No link.

ping failed; host 192.168.10.1 is not alive

Could someone help me to understand if the above issue can be fixed by any config changes ?

thanks Ram