The current 4-minute data transfer timeout is misleading and broken. Instead of such a long wait, calculate the timeout duration based on the length of the data transfer. The current formula is the transfer length in bits, divided by a multiplication of bus frequency in Hz, bus width, DDR mode and converted the mSec. The value is bounded from the bottom to 1000 mSec.

Signed-off-by: Marek Vasut marex@denx.de Cc: Jaehoon Chung jh80.chung@samsung.com Cc: Simon Glass sjg@chromium.org --- V2: Pull the timeout calculation into separate function --- drivers/mmc/dw_mmc.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index 93a836eac3..d4976ac879 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -114,22 +114,40 @@ static int dwmci_fifo_ready(struct dwmci_host *host, u32 bit, u32 *len) return 0; }

+static unsigned int dwmci_get_timeout(struct mmc *mmc, const unsigned int size) +{ + unsigned int timeout; + + timeout = size * 8 * 1000; /* counting in bits and msec */ + timeout *= 2; /* wait twice as long */ + timeout /= mmc->clock; + timeout /= mmc->bus_width; + timeout /= mmc->ddr_mode ? 2 : 1; + timeout = (timeout < 1000) ? 1000 : timeout; + + return timeout; +} + static int dwmci_data_transfer(struct dwmci_host *host, struct mmc_data *data) { + struct mmc *mmc = host->mmc; int ret = 0; - u32 timeout = 240000; - u32 mask, size, i, len = 0; + u32 timeout, mask, size, i, len = 0; u32 *buf = NULL; ulong start = get_timer(0); u32 fifo_depth = (((host->fifoth_val & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1) * 2;

- size = data->blocksize * data->blocks / 4; + size = data->blocksize * data->blocks; if (data->flags == MMC_DATA_READ) buf = (unsigned int *)data->dest; else buf = (unsigned int *)data->src;

+ timeout = dwmci_get_timeout(mmc, size); + + size /= 4; + for (;;) { mask = dwmci_readl(host, DWMCI_RINTSTS); /* Error during data transfer. */