[U-Boot] [PATCH 1/2] README: I2C: Fix indent
Signed-off-by: Nobuhiro Iwamatsu nobuhiro.iwamatsu.yj@renesas.com --- README | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/README b/README index cee8e2f..77d2e80 100644 --- a/README +++ b/README @@ -1987,16 +1987,16 @@ CBFS (Coreboot Filesystem) support offset CONFIG_SYS_FSL_I2C_SPEED for the i2c speed and CONFIG_SYS_FSL_I2C_SLAVE for the slave addr of the first bus. - - If your board supports a second fsl i2c bus, define + - If your board supports a second fsl i2c bus, define CONFIG_SYS_FSL_I2C2_OFFSET for the register offset CONFIG_SYS_FSL_I2C2_SPEED for the speed and CONFIG_SYS_FSL_I2C2_SLAVE for the slave address of the second bus.
- drivers/i2c/tegra_i2c.c: - - activate this driver with CONFIG_SYS_I2C_TEGRA - - This driver adds 4 i2c buses with a fix speed from - 100000 and the slave addr 0! + - activate this driver with CONFIG_SYS_I2C_TEGRA + - This driver adds 4 i2c buses with a fix speed from + 100000 and the slave addr 0!
- drivers/i2c/ppc4xx_i2c.c - activate this driver with CONFIG_SYS_I2C_PPC4XX
If user uses the I2C in before the relocation, board of sh and rmobile will not start. This will solve this problem.
Signed-off-by: Nobuhiro Iwamatsu nobuhiro.iwamatsu.yj@renesas.com --- drivers/i2c/sh_i2c.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c index 58f8bf1..808202c 100644 --- a/drivers/i2c/sh_i2c.c +++ b/drivers/i2c/sh_i2c.c @@ -1,6 +1,6 @@ /* - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Nobuhiro Iwamatsu nobuhiro.iwamatsu.yj@renesas.com + * Copyright (C) 2011, 2013 Renesas Solutions Corp. + * Copyright (C) 2011, 2013 Nobuhiro Iwamatsu nobuhiro.iwamatsu.yj@renesas.com * * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,6 +8,8 @@ #include <common.h> #include <asm/io.h>
+DECLARE_GLOBAL_DATA_PTR; + /* Every register is 32bit aligned, but only 8bits in size */ #define ureg(name) u8 name; u8 __pad_##name##0; u16 __pad_##name##1; struct sh_i2c { @@ -240,6 +242,10 @@ void i2c_init(int speed, int slaveaddr) { int num, denom, tmp;
+ /* No i2c support prior to relocation */ + if (!(gd->flags & GD_FLG_RELOC)) + return; + #ifdef CONFIG_I2C_MULTI_BUS current_bus = 0; #endif
Hello Nobuhiro,
Am 11.10.2013 09:23, schrieb Nobuhiro Iwamatsu:
If user uses the I2C in before the relocation, board of sh and rmobile will not start. This will solve this problem.
Signed-off-by: Nobuhiro Iwamatsunobuhiro.iwamatsu.yj@renesas.com
drivers/i2c/sh_i2c.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
Applied to u-boot-i2c.git
Thanks!
bye, Heiko
Hello Nobuhiro,
Am 11.10.2013 09:23, schrieb Nobuhiro Iwamatsu:
Signed-off-by: Nobuhiro Iwamatsunobuhiro.iwamatsu.yj@renesas.com
README | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
Applied to u-boot-i2c.git
Thanks!
bye, Heiko
participants (2)
-
Heiko Schocher -
Nobuhiro Iwamatsu