Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted.

Signed-off-by: Jon Loeliger jdl@freescale.com --- disk/part.c | 2 +- doc/README.JFFS2 | 2 +- doc/README.PIP405 | 14 ++++++-------- doc/README.usb | 6 +++--- lib_arm/board.c | 2 +- lib_generic/crc32.c | 4 ++-- lib_i386/board.c | 4 ++-- lib_m68k/board.c | 2 +- lib_mips/board.c | 2 +- lib_ppc/board.c | 4 ++-- lib_ppc/kgdb.c | 2 +- tools/updater/cmd_flash.c | 2 +- 12 files changed, 22 insertions(+), 24 deletions(-)

diff --git a/disk/part.c b/disk/part.c index b0c909c..0e772ee 100644 --- a/disk/part.c +++ b/disk/part.c @@ -174,7 +174,7 @@ void dev_print (block_dev_desc_t *dev_desc) puts (" Capacity: not available\n"); } } -#endif /* CFG_CMD_IDE || CFG_CMD_SCSI || CFG_CMD_USB || CONFIG_MMC */ +#endif

#if (defined(CONFIG_CMD_IDE) || \ defined(CONFIG_CMD_SCSI) || \ diff --git a/doc/README.JFFS2 b/doc/README.JFFS2 index 270da90..c5d67fd 100644 --- a/doc/README.JFFS2 +++ b/doc/README.JFFS2 @@ -2,7 +2,7 @@ JFFS2 options and usage. -----------------------

JFFS2 in U-Boot is a read only implementation of the file system in -Linux with the same name. To use JFFS2 define CFG_CMD_JFFS2. +Linux with the same name. To use JFFS2 define CONFIG_CMD_JFFS2.

The module adds three new commands. fsload - load binary file from a file system image diff --git a/doc/README.PIP405 b/doc/README.PIP405 index c5ccf18..610ff21 100644 --- a/doc/README.PIP405 +++ b/doc/README.PIP405 @@ -32,10 +32,8 @@ Changed files: - include/cmd_bsp.h added PIP405 commands definitions - include/cmd_condefs.h added Floppy and SCSI support - include/cmd_disk.h changed to work with block device description -- include/config_LANTEC.h excluded CFG_CMD_FDC and CFG_CMD_SCSI from - CONFIG_CMD_FULL -- include/config_hymod.h excluded CFG_CMD_FDC and CFG_CMD_SCSI from - CONFIG_CMD_FULL +- include/config_LANTEC.h excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI +- include/config_hymod.h excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI - include/flash.h added INTEL_ID_28F320C3T 0x88C488C4 - include/i2c.h added "defined(CONFIG_PIP405)" - include/image.h added IH_OS_U_BOOT, IH_TYPE_FIRMWARE @@ -88,8 +86,8 @@ section "Changes".

New Commands: ------------- -CFG_CMD_SCSI SCSI Support -CFG_CMF_FDC Floppy disk support +CONFIG_CMD_SCSI SCSI Support +CONFIG_CMF_FDC Floppy disk support

IDE additions: -------------- @@ -172,8 +170,8 @@ Added Devices: Floppy support: --------------- Support of a standard floppy disk controller at address CFG_ISA_IO_BASE_ADDRESS -+ 0x3F0. Enabled with define CFG_CMD_FDC. Reads a unformated floppy disk with a -image header (see: mkimage). No interrupts and no DMA are used for this. ++ 0x3F0. Enabled with define CONFIG_CMD_FDC. Reads a unformated floppy disk +with a image header (see: mkimage). No interrupts and no DMA are used for this. Added files: - common/cmd_fdc.c - include/cmd_fdc.h diff --git a/doc/README.usb b/doc/README.usb index 41f76f4..b3bcb91 100644 --- a/doc/README.usb +++ b/doc/README.usb @@ -73,8 +73,8 @@ Storage USB Commands:

Config Switches: ---------------- -CFG_CMD_USB enables basic USB support and the usb command -CONFIG_USB_UHCI defines the lowlevel part.A lowlevel part must be defined if - using CFG_CMD_USB +CONFIG_CMD_USB enables basic USB support and the usb command +CONFIG_USB_UHCI defines the lowlevel part.A lowlevel part must be defined + if using CONFIG_CMD_USB CONFIG_USB_KEYBOARD enables the USB Keyboard CONFIG_USB_STORAGE enables the USB storage devices diff --git a/lib_arm/board.c b/lib_arm/board.c index e175607..8f4e19b 100644 --- a/lib_arm/board.c +++ b/lib_arm/board.c @@ -382,7 +382,7 @@ void start_armboot (void) if ((s = getenv ("bootfile")) != NULL) { copy_filename (BootFile, s, sizeof (BootFile)); } -#endif /* CFG_CMD_NET */ +#endif

#ifdef BOARD_LATE_INIT board_late_init (); diff --git a/lib_generic/crc32.c b/lib_generic/crc32.c index da23336..df0dbca 100644 --- a/lib_generic/crc32.c +++ b/lib_generic/crc32.c @@ -9,7 +9,7 @@ */

#ifndef USE_HOSTCC /* Shut down "ANSI does not permit..." warnings */ -#include <common.h> /* to get command definitions like CFG_CMD_JFFS2 */ +#include <common.h> #endif

#include "zlib.h" @@ -196,4 +196,4 @@ uLong ZEXPORT crc32_no_comp(uLong crc, const Bytef *buf, uInt len) return crc; }

-#endif /* CFG_CMD_JFFS2 */ +#endif diff --git a/lib_i386/board.c b/lib_i386/board.c index 667d2da..47fbab4 100644 --- a/lib_i386/board.c +++ b/lib_i386/board.c @@ -352,7 +352,7 @@ void start_i386boot (void) if ((s = getenv ("bootfile")) != NULL) { copy_filename (BootFile, s, sizeof (BootFile)); } -#endif /* CFG_CMD_NET */ +#endif

WATCHDOG_RESET();

@@ -360,7 +360,7 @@ void start_i386boot (void) WATCHDOG_RESET(); puts("IDE: "); ide_init(); -#endif /* CFG_CMD_IDE */ +#endif

#if defined(CONFIG_CMD_SCSI) WATCHDOG_RESET(); diff --git a/lib_m68k/board.c b/lib_m68k/board.c index b7e76b8..293fd04 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -624,7 +624,7 @@ void board_init_r (gd_t *id, ulong dest_addr) if ((s = getenv ("bootfile")) != NULL) { copy_filename (BootFile, s, sizeof (BootFile)); } -#endif /* CFG_CMD_NET */ +#endif

WATCHDOG_RESET ();

diff --git a/lib_mips/board.c b/lib_mips/board.c index dd3d167..91ccec0 100644 --- a/lib_mips/board.c +++ b/lib_mips/board.c @@ -403,7 +403,7 @@ void board_init_r (gd_t *id, ulong dest_addr) if ((s = getenv ("bootfile")) != NULL) { copy_filename (BootFile, s, sizeof (BootFile)); } -#endif /* CFG_CMD_NET */ +#endif

#if defined(CONFIG_MISC_INIT_R) /* miscellaneous platform dependent initialisations */ diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 12ea473..8651cb3 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -982,7 +982,7 @@ void board_init_r (gd_t *id, ulong dest_addr) if ((s = getenv ("bootfile")) != NULL) { copy_filename (BootFile, s, sizeof (BootFile)); } -#endif /* CFG_CMD_NET */ +#endif

WATCHDOG_RESET ();

@@ -1051,7 +1051,7 @@ void board_init_r (gd_t *id, ulong dest_addr) #else ide_init (); #endif -#endif /* CFG_CMD_IDE */ +#endif

#ifdef CONFIG_LAST_STAGE_INIT WATCHDOG_RESET (); diff --git a/lib_ppc/kgdb.c b/lib_ppc/kgdb.c index d272d3a..78c2f0c 100644 --- a/lib_ppc/kgdb.c +++ b/lib_ppc/kgdb.c @@ -323,4 +323,4 @@ kgdb_breakpoint(int argc, char *argv[]) "); }

-#endif /* CFG_CMD_KGDB */ +#endif diff --git a/tools/updater/cmd_flash.c b/tools/updater/cmd_flash.c index 746bcbb..a976e0d 100644 --- a/tools/updater/cmd_flash.c +++ b/tools/updater/cmd_flash.c @@ -427,4 +427,4 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last) return rcode; }

-#endif /* CFG_CMD_FLASH */ +#endif