The QorIQ LS1 family is built on Layerscape architecture, the industry's first software-aware, core-agnostic networking architecture to offer unprecedented efficiency and scale.

Freescale LS102xA is a set of SoCs combines two ARM Cortex-A7 cores that have been optimized for high reliability and pack the highest level of integration available for sub-3 W embedded communications processors with Layerscape architecture and with a comprehensive enablement model focused on ease of programmability.

Signed-off-by: Alison Wang alison.wang@freescale.com Signed-off-by: Jason Jin jason.jin@freescale.com Signed-off-by: Jingchang Lu jingchang.lu@freescale.com Signed-off-by: Prabhakar Kushwaha prabhakar@freescale.com --- Change log: v2: Add serdes support. Update DDR frequency and data rate information. Fix overflow condition error for the timer.

arch/arm/cpu/armv7/ls102xa/Makefile | 12 + arch/arm/cpu/armv7/ls102xa/clock.c | 131 ++++++ arch/arm/cpu/armv7/ls102xa/cpu.c | 103 +++++ arch/arm/cpu/armv7/ls102xa/fdt.c | 73 ++++ arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c | 119 ++++++ arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h | 12 + arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c | 41 ++ arch/arm/cpu/armv7/ls102xa/timer.c | 127 ++++++ arch/arm/include/asm/arch-ls102xa/clock.h | 23 ++ arch/arm/include/asm/arch-ls102xa/config.h | 69 ++++ arch/arm/include/asm/arch-ls102xa/fsl_serdes.h | 33 ++ arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 461 ++++++++++++++++++++++ arch/arm/include/asm/arch-ls102xa/imx-regs.h | 53 +++ arch/arm/include/asm/config.h | 4 + arch/arm/include/asm/io.h | 8 +- drivers/watchdog/Makefile | 2 +- 16 files changed, 1269 insertions(+), 2 deletions(-) create mode 100644 arch/arm/cpu/armv7/ls102xa/Makefile create mode 100644 arch/arm/cpu/armv7/ls102xa/clock.c create mode 100644 arch/arm/cpu/armv7/ls102xa/cpu.c create mode 100644 arch/arm/cpu/armv7/ls102xa/fdt.c create mode 100644 arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c create mode 100644 arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h create mode 100644 arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c create mode 100644 arch/arm/cpu/armv7/ls102xa/timer.c create mode 100644 arch/arm/include/asm/arch-ls102xa/clock.h create mode 100644 arch/arm/include/asm/arch-ls102xa/config.h create mode 100644 arch/arm/include/asm/arch-ls102xa/fsl_serdes.h create mode 100644 arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h create mode 100644 arch/arm/include/asm/arch-ls102xa/imx-regs.h

diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile new file mode 100644 index 0000000..d82ce8d --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/Makefile @@ -0,0 +1,12 @@ +# +# Copyright 2014 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += cpu.o +obj-y += clock.o +obj-y += timer.o + +obj-$(CONFIG_OF_LIBFDT) += fdt.o +obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o diff --git a/arch/arm/cpu/armv7/ls102xa/clock.c b/arch/arm/cpu/armv7/ls102xa/clock.c new file mode 100644 index 0000000..75bb0e9 --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/clock.c @@ -0,0 +1,131 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/immap_ls102xa.h> +#include <asm/arch/clock.h> +#include <fsl_ifc.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS +#define CONFIG_SYS_FSL_NUM_CC_PLLS 2 +#endif + +void get_sys_info(struct sys_info *sys_info) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); +#ifdef CONFIG_FSL_IFC + struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR; + u32 ccr; +#endif + struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_LS1_CLK_ADDR); + unsigned int cpu; + const u8 core_cplx_pll[6] = { + [0] = 0, /* CC1 PPL / 1 */ + [1] = 0, /* CC1 PPL / 2 */ + [4] = 1, /* CC2 PPL / 1 */ + [5] = 1, /* CC2 PPL / 2 */ + }; + + const u8 core_cplx_pll_div[6] = { + [0] = 1, /* CC1 PPL / 1 */ + [1] = 2, /* CC1 PPL / 2 */ + [4] = 1, /* CC2 PPL / 1 */ + [5] = 2, /* CC2 PPL / 2 */ + }; + + uint i; + uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS]; + uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS]; + unsigned long sysclk = CONFIG_SYS_CLK_FREQ; + + sys_info->freq_systembus = sysclk; +#ifdef CONFIG_DDR_CLK_FREQ + sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ; +#else + sys_info->freq_ddrbus = sysclk; +#endif + + sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >> + RCWSR0_SYS_PLL_RAT_SHIFT) & RCWSR0_SYS_PLL_RAT_MASK; + sys_info->freq_ddrbus *= (in_be32(&gur->rcwsr[0]) >> + RCWSR0_MEM_PLL_RAT_SHIFT) & RCWSR0_MEM_PLL_RAT_MASK; + + for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) { + ratio[i] = (in_be32(&clk->pllcgsr[i].pllcngsr) >> 1) & 0x3f; + if (ratio[i] > 4) + freq_c_pll[i] = sysclk * ratio[i]; + else + freq_c_pll[i] = sys_info->freq_systembus * ratio[i]; + } + + for (cpu = 0; cpu < CONFIG_MAX_CPUS; cpu++) { + u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27) + & 0xf; + u32 cplx_pll = core_cplx_pll[c_pll_sel]; + + sys_info->freq_processor[cpu] = + freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel]; + } + +#if defined(CONFIG_FSL_IFC) + ccr = in_be32(&ifc_regs->ifc_ccr); + ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1; + + sys_info->freq_localbus = sys_info->freq_systembus / ccr; +#endif +} + + +int get_clocks(void) +{ + struct sys_info sys_info; + + get_sys_info(&sys_info); + gd->cpu_clk = sys_info.freq_processor[0]; + gd->bus_clk = sys_info.freq_systembus; + gd->mem_clk = sys_info.freq_ddrbus * 2; + +#if defined(CONFIG_FSL_ESDHC) + gd->arch.sdhc_clk = gd->bus_clk; +#endif + + return 0; +} + +ulong get_bus_freq(ulong dummy) +{ + return gd->bus_clk; +} + +ulong get_ddr_freq(ulong dummy) +{ + return gd->mem_clk; +} + +int get_serial_clock(void) +{ + return gd->bus_clk / 2; +} + +unsigned int mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_I2C_CLK: + return get_bus_freq(0) / 2; + case MXC_ESDHC_CLK: + return get_bus_freq(0); + case MXC_DSPI_CLK: + return get_bus_freq(0) / 2; + case MXC_UART_CLK: + return get_bus_freq(0) / 2; + default: + printf("Unsupported clock\n"); + } + return 0; +} diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c new file mode 100644 index 0000000..45a0405 --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c @@ -0,0 +1,103 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/io.h> +#include <asm/arch/immap_ls102xa.h> +#include <tsec.h> +#include <netdev.h> +#include <fsl_esdhc.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + char buf1[32], buf2[32]; + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + unsigned int svr, major, minor, ver, i; + + svr = in_be32(&gur->svr); + major = SVR_MAJ(svr); + minor = SVR_MIN(svr); + + puts("CPU: Freescale LayerScape "); + + ver = SVR_SOC_VER(svr); + switch (ver) { + case SOC_VER_SLS1020: + puts("SLS1020"); + break; + case SOC_VER_LS1020: + puts("LS1020"); + break; + case SOC_VER_LS1021: + puts("LS1021"); + break; + case SOC_VER_LS1022: + puts("LS1022"); + break; + default: + puts("Unknown"); + break; + } + + if (IS_E_PROCESSOR(svr) && (ver != SOC_VER_SLS1020)) + puts("E"); + + printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr); + + puts("Clock Configuration:"); + + printf("\n CPU0(ARMV7):%-4s MHz, ", strmhz(buf1, gd->cpu_clk)); + printf("\n Bus:%-4s MHz, ", strmhz(buf1, gd->bus_clk)); + printf("DDR:%-4s MHz (%s MT/s data rate), ", + strmhz(buf1, gd->mem_clk/2), strmhz(buf2, gd->mem_clk)); + puts("\n"); + + /* Display the RCW, so that no one gets confused as to what RCW + * we're actually using for this boot. + */ + puts("Reset Configuration Word (RCW):"); + for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { + u32 rcw = in_be32(&gur->rcwsr[i]); + + if ((i % 4) == 0) + printf("\n %08x:", i * 4); + printf(" %08x", rcw); + } + puts("\n"); + + return 0; +} +#endif + +void enable_caches(void) +{ +#ifndef CONFIG_SYS_ICACHE_OFF + icache_enable(); +#endif +#ifndef CONFIG_SYS_DCACHE_OFF + dcache_enable(); +#endif +} + +#ifdef CONFIG_FSL_ESDHC +int cpu_mmc_init(bd_t *bis) +{ + return fsl_esdhc_mmc_init(bis); +} +#endif + +int cpu_eth_init(bd_t *bis) +{ +#ifdef CONFIG_TSEC_ENET + tsec_standard_init(bis); +#endif + + return 0; +} diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c new file mode 100644 index 0000000..49e6f39 --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/fdt.c @@ -0,0 +1,73 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/arch/clock.h> +#include <linux/ctype.h> +#ifdef CONFIG_FSL_ESDHC +#include <fsl_esdhc.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +void ft_cpu_setup(void *blob, bd_t *bd) +{ + int off; + int val; + unsigned long busclk = get_bus_freq(0); + + fdt_fixup_ethernet(blob); + + off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); + while (off != -FDT_ERR_NOTFOUND) { + val = gd->cpu_clk; + fdt_setprop(blob, off, "clock-frequency", &val, 4); + off = fdt_node_offset_by_prop_value(blob, off, + "device_type", "cpu", 4); + } + + do_fixup_by_prop_u32(blob, + "device_type", "soc", 4, "bus-frequency", busclk / 2, 1); + +#ifdef CONFIG_SYS_NS16550 + do_fixup_by_compat_u32(blob, "fsl,ns16550", + "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); +#endif + + do_fixup_by_compat_u32(blob, "fsl,sys-clock", + "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); + +#if defined(CONFIG_FSL_ESDHC) + fdt_fixup_esdhc(blob, bd); +#endif + + /* + * platform bus clock = system bus clock/2 + * Here busclk = system bus clock + * We are using the platform bus clock as 1588 Timer reference + * clock source select + */ + do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer", + "timer-frequency", busclk / 2, 1); + + /* + * clock-freq should change to clock-frequency and + * flexcan-v1.0 should change to p1010-flexcan respectively + * in the future. + */ + do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0", + "clock_freq", busclk / 2, 1); + + do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0", + "clock-frequency", busclk / 2, 1); + + do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan", + "clock-frequency", busclk / 2, 1); +} diff --git a/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c new file mode 100644 index 0000000..9d8bc28 --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c @@ -0,0 +1,119 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/fsl_serdes.h> +#include <asm/arch/immap_ls102xa.h> +#include <asm/errno.h> +#include <asm/io.h> +#include "fsl_ls1_serdes.h" + +#ifdef CONFIG_SYS_FSL_SRDS_1 +static u64 serdes1_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 +static u64 serdes2_prtcl_map; +#endif + +int is_serdes_configured(enum srds_prtcl device) +{ + u64 ret = 0; + +#ifdef CONFIG_SYS_FSL_SRDS_1 + ret |= (1ULL << device) & serdes1_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 + ret |= (1ULL << device) & serdes2_prtcl_map; +#endif + + return !!ret; +} + +int serdes_get_first_lane(u32 sd, enum srds_prtcl device) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 cfg = in_be32(&gur->rcwsr[4]); + int i; + + switch (sd) { +#ifdef CONFIG_SYS_FSL_SRDS_1 + case FSL_SRDS_1: + cfg &= RCWSR4_SRDS1_PRTCL_MASK; + cfg >>= RCWSR4_SRDS1_PRTCL_SHIFT; + break; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 + case FSL_SRDS_2: + cfg &= RCWSR4_SRDS2_PRTCL_MASK; + cfg >>= RCWSR4_SRDS2_PRTCL_SHIFT; + break; +#endif + default: + printf("invalid SerDes%d\n", sd); + break; + } + /* Is serdes enabled at all? */ + if (unlikely(cfg == 0)) + return -ENODEV; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_get_prtcl(sd, cfg, i) == device) + return i; + } + + return -ENODEV; +} + +u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u64 serdes_prtcl_map = 0; + u32 cfg; + int lane; + + cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask; + cfg >>= sd_prctl_shift; + printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg); + + if (!is_serdes_prtcl_valid(sd, cfg)) + printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg); + + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane); + serdes_prtcl_map |= (1ULL << lane_prtcl); + } + + return serdes_prtcl_map; +} + +void fsl_serdes_init(void) +{ +#ifdef CONFIG_SYS_FSL_SRDS_1 + serdes1_prtcl_map = serdes_init(FSL_SRDS_1, + CONFIG_SYS_FSL_SERDES_ADDR, + RCWSR4_SRDS1_PRTCL_MASK, + RCWSR4_SRDS1_PRTCL_SHIFT); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 + serdes2_prtcl_map = serdes_init(FSL_SRDS_2, + CONFIG_SYS_FSL_SERDES_ADDR + FSL_SRDS_2 * 0x1000, + RCWSR4_SRDS2_PRTCL_MASK, + RCWSR4_SRDS2_PRTCL_SHIFT); +#endif +} + +const char *serdes_clock_to_string(u32 clock) +{ + switch (clock) { + case SRDS_PLLCR0_RFCK_SEL_100: + return "100"; + case SRDS_PLLCR0_RFCK_SEL_125: + return "125"; + default: + return "100"; + } +} + diff --git a/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h new file mode 100644 index 0000000..834aa53 --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h @@ -0,0 +1,12 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __FSL_LS1_SERDES_H +#define __FSL_LS1_SERDES_H + +int is_serdes_prtcl_valid(int serdes, u32 prtcl); +int serdes_lane_enabled(int lane); +#endif /* __FSL_LS1_SERDES_H */ diff --git a/arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c b/arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c new file mode 100644 index 0000000..cc53910 --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c @@ -0,0 +1,41 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/fsl_serdes.h> +#include <asm/arch/immap_ls102xa.h> + +static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { + [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1}, + [0x10] = {PCIE1, SATA1, PCIE2, PCIE2}, + [0x20] = {PCIE1, SGMII_TSEC1, PCIE2, SGMII_TSEC2}, + [0x30] = {PCIE1, SATA1, SGMII_TSEC1, SGMII_TSEC2}, + [0x40] = {PCIE1, PCIE1, SATA1, SGMII_TSEC2}, + [0x50] = {PCIE1, PCIE1, PCIE2, SGMII_TSEC2}, + [0x60] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2}, + [0x70] = {PCIE1, SATA1, PCIE2, SGMII_TSEC2}, + [0x80] = {PCIE2, PCIE2, PCIE2, PCIE2}, +}; + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + return serdes_cfg_tbl[cfg][lane]; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + + if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_cfg_tbl[prtcl][i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/arm/cpu/armv7/ls102xa/timer.c b/arch/arm/cpu/armv7/ls102xa/timer.c new file mode 100644 index 0000000..11b17b2 --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/timer.c @@ -0,0 +1,127 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <div64.h> +#include <asm/arch/immap_ls102xa.h> +#include <asm/arch/clock.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * This function is intended for SHORT delays only. + * It will overflow at around 10 seconds @ 400MHz, + * or 20 seconds @ 200MHz. + */ +unsigned long usec2ticks(unsigned long usec) +{ + ulong ticks; + + if (usec < 1000) + ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000; + else + ticks = ((usec / 10) * (get_tbclk() / 100000)); + + return ticks; +} + +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + unsigned long freq; + + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq)); + + tick *= CONFIG_SYS_HZ; + do_div(tick, freq); + + return tick; +} + +static inline unsigned long long us_to_tick(unsigned long long usec) +{ + unsigned long freq; + + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq)); + + usec = usec * freq + 999999; + do_div(usec, 1000000); + + return usec; +} + +int timer_init(void) +{ + struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR; + unsigned long ctrl, val, freq; + + /* Enable System Counter */ + writel(SYS_COUNTER_CTRL_ENABLE, &sctr->cntcr); + + freq = GENERIC_TIMER_CLK; + asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); + + /* Set PL1 Physical Timer Ctrl */ + ctrl = ARCH_TIMER_CTRL_ENABLE; + asm("mcr p15, 0, %0, c14, c2, 1" : : "r" (ctrl)); + + /* Set PL1 Physical Comp Value */ + val = TIMER_COMP_VAL; + asm("mcrr p15, 2, %Q0, %R0, c14" : : "r" (val)); + + gd->arch.tbl = 0; + gd->arch.tbu = 0; + + return 0; +} + +unsigned long long get_ticks(void) +{ + unsigned long long now; + + asm("mrrc p15, 0, %Q0, %R0, c14" : "=r" (now)); + + gd->arch.tbl = (unsigned long)(now & 0xffffffff); + gd->arch.tbu = (unsigned long)(now >> 32); + + return now; +} + +unsigned long get_timer_masked(void) +{ + return tick_to_time(get_ticks()); +} + +unsigned long get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +/* delay x useconds and preserve advance timstamp value */ +void __udelay(unsigned long usec) +{ + unsigned long long start; + unsigned long tmo; + + start = get_ticks(); /* get current timestamp */ + tmo = us_to_tick(usec); /* convert usecs to ticks */ + + while ((get_ticks() - start) < tmo) + ; /* loop till time has passed */ +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +unsigned long get_tbclk(void) +{ + unsigned long freq; + + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq)); + + return freq; +} diff --git a/arch/arm/include/asm/arch-ls102xa/clock.h b/arch/arm/include/asm/arch-ls102xa/clock.h new file mode 100644 index 0000000..fd36bb0 --- /dev/null +++ b/arch/arm/include/asm/arch-ls102xa/clock.h @@ -0,0 +1,23 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#ifndef __ASM_ARCH_LS102XA_CLOCK_H_ +#define __ASM_ARCH_LS102XA_CLOCK_H_ + +#include <common.h> + +enum mxc_clock { + MXC_ARM_CLK = 0, + MXC_UART_CLK, + MXC_ESDHC_CLK, + MXC_I2C_CLK, + MXC_DSPI_CLK, +}; + +unsigned int mxc_get_clock(enum mxc_clock clk); + +#endif /* __ASM_ARCH_LS102XA_CLOCK_H_ */ diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h new file mode 100644 index 0000000..4041577 --- /dev/null +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -0,0 +1,69 @@ +/* + * Copyright 2014, Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARMV7_LS102xA_CONFIG_ +#define _ASM_ARMV7_LS102xA_CONFIG_ + +#define CONFIG_SYS_IMMR 0x01000000 + +#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) +#define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000) +#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000) +#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000) +#define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000) +#define CONFIG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0x00ea0000) +#define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000) +#define CONFIG_SYS_FSL_LS1_CLK_ADDR (CONFIG_SYS_IMMR + 0x00ee1000) +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500) + +#define CONFIG_SYS_TSEC1_OFFSET 0x01d10000 +#define CONFIG_SYS_TSEC2_OFFSET 0x01d50000 +#define CONFIG_SYS_TSEC3_OFFSET 0x01d90000 +#define CONFIG_SYS_MDIO1_OFFSET 0x01d24000 + +#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) +#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) + +#define SCTR_BASE_ADDR (CONFIG_SYS_IMMR + 0x01b00000) + +#define I2C1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01180000) +#define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01190000) +#define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x011a0000) + +#define WDOG1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01ad0000) + +#define QSPI0_BASE_ADDR (CONFIG_SYS_IMMR + 0x00550000) +#define DSPI1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01100000) + +#define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000) + +#ifdef CONFIG_DDR_SPD +#define CONFIG_SYS_FSL_DDR_BE +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_FSL_DDRC_ARM_GEN3 +#define CONFIG_SYS_FSL_DDR +#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) +#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS1_DDR_BLOCK1_SIZE +#endif + +#define CONFIG_SYS_FSL_IFC_BE +#define CONFIG_SYS_FSL_ESDHC_BE +#define CONFIG_SYS_FSL_WDOG_BE +#define CONFIG_SYS_FSL_DSPI_BE +#define CONFIG_SYS_FSL_QSPI_BE + +#define CONFIG_SYS_FSL_SRDS_1 + +#ifdef CONFIG_LS102xA +#define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#else +#error SoC not defined +#endif + +#endif /* _ASM_ARMV7_LS102xA_CONFIG_ */ diff --git a/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h b/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h new file mode 100644 index 0000000..3a92f5a --- /dev/null +++ b/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h @@ -0,0 +1,33 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __FSL_SERDES_H +#define __FSL_SERDES_H + +#include <config.h> + +enum srds_prtcl { + NONE = 0, + PCIE1, + PCIE2, + SATA1, + SGMII_TSEC1, + SGMII_TSEC2, +}; + +enum srds { + FSL_SRDS_1 = 0, + FSL_SRDS_2 = 1, +}; + +int is_serdes_configured(enum srds_prtcl device); +void fsl_serdes_init(void); +const char *serdes_clock_to_string(u32 clock); + +int serdes_get_first_lane(u32 sd, enum srds_prtcl device); +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); + +#endif /* __FSL_SERDES_H */ diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h new file mode 100644 index 0000000..65fb4bf --- /dev/null +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -0,0 +1,461 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_LS102XA_IMMAP_H_ +#define __ASM_ARCH_LS102XA_IMMAP_H_ + +#define SVR_MAJ(svr) (((svr) >> 4) & 0xf) +#define SVR_MIN(svr) (((svr) >> 0) & 0xf) +#define SVR_SOC_VER(svr) (((svr) >> 8) & 0x7ff) +#define IS_E_PROCESSOR(svr) (svr & 0x80000) + +#define SOC_VER_SLS1020 0x00 +#define SOC_VER_LS1020 0x10 +#define SOC_VER_LS1021 0x11 +#define SOC_VER_LS1022 0x12 + +#define RCWSR0_SYS_PLL_RAT_SHIFT 25 +#define RCWSR0_SYS_PLL_RAT_MASK 0x1f +#define RCWSR0_MEM_PLL_RAT_SHIFT 16 +#define RCWSR0_MEM_PLL_RAT_MASK 0x3f + +#define RCWSR4_SRDS1_PRTCL_SHIFT 24 +#define RCWSR4_SRDS1_PRTCL_MASK 0xff000000 + +#define TIMER_COMP_VAL 0xffffffff +#define ARCH_TIMER_CTRL_ENABLE (1 << 0) +#define SYS_COUNTER_CTRL_ENABLE (1 << 24) + +struct sys_info { + unsigned long freq_processor[CONFIG_MAX_CPUS]; + unsigned long freq_systembus; + unsigned long freq_ddrbus; + unsigned long freq_localbus; +}; + +/* Device Configuration and Pin Control */ +struct ccsr_gur { + u32 porsr1; /* POR status 1 */ + u32 porsr2; /* POR status 2 */ + u8 res_008[0x20-0x8]; + u32 gpporcr1; /* General-purpose POR configuration */ + u32 gpporcr2; + u32 dcfg_fusesr; /* Fuse status register */ + u8 res_02c[0x70-0x2c]; + u32 devdisr; /* Device disable control */ + u32 devdisr2; /* Device disable control 2 */ + u32 devdisr3; /* Device disable control 3 */ + u32 devdisr4; /* Device disable control 4 */ + u32 devdisr5; /* Device disable control 5 */ + u8 res_084[0x94-0x84]; + u32 coredisru; /* uppper portion for support of 64 cores */ + u32 coredisrl; /* lower portion for support of 64 cores */ + u8 res_09c[0xa4-0x9c]; + u32 svr; /* System version */ + u8 res_0a8[0xb0-0xa8]; + u32 rstcr; /* Reset control */ + u32 rstrqpblsr; /* Reset request preboot loader status */ + u8 res_0b8[0xc0-0xb8]; + u32 rstrqmr1; /* Reset request mask */ + u8 res_0c4[0xc8-0xc4]; + u32 rstrqsr1; /* Reset request status */ + u8 res_0cc[0xd4-0xcc]; + u32 rstrqwdtmrl; /* Reset request WDT mask */ + u8 res_0d8[0xdc-0xd8]; + u32 rstrqwdtsrl; /* Reset request WDT status */ + u8 res_0e0[0xe4-0xe0]; + u32 brrl; /* Boot release */ + u8 res_0e8[0x100-0xe8]; + u32 rcwsr[16]; /* Reset control word status */ + u8 res_140[0x200-0x140]; + u32 scratchrw[4]; /* Scratch Read/Write */ + u8 res_210[0x300-0x210]; + u32 scratchw1r[4]; /* Scratch Read (Write once) */ + u8 res_310[0x400-0x310]; + u32 crstsr; + u8 res_404[0x550-0x404]; + u32 sataliodnr; + u8 res_554[0x604-0x554]; + u32 pamubypenr; + u32 dmacr1; + u8 res_60c[0x740-0x60c]; /* add more registers when needed */ + u32 tp_ityp[64]; /* Topology Initiator Type Register */ + struct { + u32 upper; + u32 lower; + } tp_cluster[1]; /* Core Cluster n Topology Register */ + u8 res_848[0xe60-0x848]; + u32 ddrclkdr; + u8 res_e60[0xe68-0xe64]; + u32 ifcclkdr; + u8 res_e68[0xe80-0xe6c]; + u32 sdhcpcr; +}; + +/* Supplemental Configuration Unit */ +struct ccsr_scfg { + u32 dpslpcr; + u32 resv0[2]; + u32 etsecclkdpslpcr; + u32 resv1[5]; + u32 fuseovrdcr; + u32 pixclkcr; + u32 resv2[5]; + u32 spimsicr; + u32 resv3[6]; + u32 pex1pmwrcr; + u32 pex1pmrdsr; + u32 resv4[3]; + u32 usb3prm1cr; + u32 usb4prm2cr; + u32 pex1rdmsgpldlsbsr; + u32 pex1rdmsgpldmsbsr; + u32 pex2rdmsgpldlsbsr; + u32 pex2rdmsgpldmsbsr; + u32 pex1rdmmsgrqsr; + u32 pex2rdmmsgrqsr; + u32 spimsiclrcr; + u32 pex1mscportsr; + u32 pex2mscportsr; + u32 pex2pmwrcr; + u32 resv5[24]; + u32 mac1_streamid; + u32 mac2_streamid; + u32 mac3_streamid; + u32 pex1_streamid; + u32 pex2_streamid; + u32 dma_streamid; + u32 sata_streamid; + u32 usb3_streamid; + u32 qe_streamid; + u32 sdhc_streamid; + u32 adma_streamid; + u32 letechsftrstcr; + u32 core0_sft_rst; + u32 core1_sft_rst; + u32 resv6[1]; + u32 usb_hi_addr; + u32 etsecclkadjcr; + u32 sai_clk; + u32 resv7[1]; + u32 dcu_streamid; + u32 usb2_streamid; + u32 ftm_reset; + u32 altcbar; + u32 qspi_cfg; + u32 pmcintecr; + u32 pmcintlecr; + u32 pmcintsr; + u32 qos1; + u32 qos2; + u32 qos3; + u32 cci_cfg; + u32 resv8[1]; + u32 etsecdmamcr; + u32 usb3prm3cr; + u32 resv9[1]; + u32 debug_streamid; + u32 resv10[5]; + u32 snpcnfgcr; + u32 resv11[1]; + u32 intpcr; + u32 resv12[20]; + u32 scfgrevcr; + u32 coresrencr; + u32 pex2pmrdsr; + u32 ddrc1cr; + u32 ddrc2cr; + u32 ddrc3cr; + u32 ddrc4cr; + u32 ddrgcr; + u32 resv13[120]; + u32 qeioclkcr; + u32 etsecmcr; + u32 sdhciovserlcr; + u32 resv14[61]; + u32 sparecr; +}; + +/* Clocking */ +struct ccsr_clk { + struct { + u32 clkcncsr; /* core cluster n clock control status */ + u8 res_004[0x1c]; + } clkcsr[2]; + u8 res_040[0x7c0]; /* 0x100 */ + struct { + u32 pllcngsr; + u8 res_804[0x1c]; + } pllcgsr[2]; + u8 res_840[0x1c0]; + u32 clkpcsr; /* 0xa00 Platform clock domain control/status */ + u8 res_a04[0x1fc]; + u32 pllpgsr; /* 0xc00 Platform PLL General Status */ + u8 res_c04[0x1c]; + u32 plldgsr; /* 0xc20 DDR PLL General Status */ + u8 res_c24[0x3dc]; +}; + +/* System Counter */ +struct sctr_regs { + u32 cntcr; + u32 cntsr; + u32 cntcv1; + u32 cntcv2; + u32 resv1[4]; + u32 cntfid0; + u32 cntfid1; + u32 resv2[1002]; + u32 counterid[12]; +}; + +#define MAX_SERDES 1 +#define SRDS_MAX_LANES 4 +#define SRDS_MAX_BANK 2 + +#define SRDS_RSTCTL_RST 0x80000000 +#define SRDS_RSTCTL_RSTDONE 0x40000000 +#define SRDS_RSTCTL_RSTERR 0x20000000 +#define SRDS_RSTCTL_SWRST 0x10000000 +#define SRDS_RSTCTL_SDEN 0x00000020 +#define SRDS_RSTCTL_SDRST_B 0x00000040 +#define SRDS_RSTCTL_PLLRST_B 0x00000080 +#define SRDS_PLLCR0_POFF 0x80000000 +#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000 +#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000 +#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000 +#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000 +#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000 +#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000 +#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000 +#define SRDS_PLLCR0_PLL_LCK 0x00800000 +#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000 +#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000 +#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000 +#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000 +#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000 +#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000 +#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000 +#define SRDS_PLLCR1_PLL_BWSEL 0x08000000 + +struct ccsr_serdes { + struct { + u32 rstctl; /* Reset Control Register */ + + u32 pllcr0; /* PLL Control Register 0 */ + + u32 pllcr1; /* PLL Control Register 1 */ + u32 res_0c; /* 0x00c */ + u32 pllcr3; + u32 pllcr4; + u8 res_18[0x20-0x18]; + } bank[2]; + u8 res_40[0x90-0x40]; + u32 srdstcalcr; /* 0x90 TX Calibration Control */ + u8 res_94[0xa0-0x94]; + u32 srdsrcalcr; /* 0xa0 RX Calibration Control */ + u8 res_a4[0xb0-0xa4]; + u32 srdsgr0; /* 0xb0 General Register 0 */ + u8 res_b4[0xe0-0xb4]; + u32 srdspccr0; /* 0xe0 Protocol Converter Config 0 */ + u32 srdspccr1; /* 0xe4 Protocol Converter Config 1 */ + u32 srdspccr2; /* 0xe8 Protocol Converter Config 2 */ + u32 srdspccr3; /* 0xec Protocol Converter Config 3 */ + u32 srdspccr4; /* 0xf0 Protocol Converter Config 4 */ + u8 res_f4[0x100-0xf4]; + struct { + u32 lnpssr; /* 0x100, 0x120, ..., 0x1e0 */ + u8 res_104[0x120-0x104]; + } srdslnpssr[4]; + u8 res_180[0x300-0x180]; + u32 srdspexeqcr; + u32 srdspexeqpcr[11]; + u8 res_330[0x400-0x330]; + u32 srdspexapcr; + u8 res_404[0x440-0x404]; + u32 srdspexbpcr; + u8 res_444[0x800-0x444]; + struct { + u32 gcr0; /* 0x800 General Control Register 0 */ + u32 gcr1; /* 0x804 General Control Register 1 */ + u32 gcr2; /* 0x808 General Control Register 2 */ + u32 sscr0; + u32 recr0; /* 0x810 Receive Equalization Control */ + u32 recr1; + u32 tecr0; /* 0x818 Transmit Equalization Control */ + u32 sscr1; + u32 ttlcr0; /* 0x820 Transition Tracking Loop Ctrl 0 */ + u8 res_824[0x83c-0x824]; + u32 tcsr3; + } lane[4]; /* Lane A, B, C, D, E, F, G, H */ + u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */ +}; + +/* DDR memory controller registers */ +struct ccsr_ddr { + u32 cs0_bnds; /* Chip Select 0 Memory Bounds */ + u32 resv1[1]; + u32 cs1_bnds; /* Chip Select 1 Memory Bounds */ + u32 resv2[1]; + u32 cs2_bnds; /* Chip Select 2 Memory Bounds */ + u32 resv3[1]; + u32 cs3_bnds; /* Chip Select 3 Memory Bounds */ + u32 resv4[25]; + u32 cs0_config; /* Chip Select Configuration */ + u32 cs1_config; /* Chip Select Configuration */ + u32 cs2_config; /* Chip Select Configuration */ + u32 cs3_config; /* Chip Select Configuration */ + u32 resv5[12]; + u32 cs0_config_2; /* Chip Select Configuration 2 */ + u32 cs1_config_2; /* Chip Select Configuration 2 */ + u32 cs2_config_2; /* Chip Select Configuration 2 */ + u32 cs3_config_2; /* Chip Select Configuration 2 */ + u32 resv6[12]; + u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */ + u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */ + u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */ + u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */ + u32 sdram_cfg; /* SDRAM Control Configuration */ + u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */ + u32 sdram_mode; /* SDRAM Mode Configuration */ + u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */ + u32 sdram_md_cntl; /* SDRAM Mode Control */ + u32 sdram_interval; /* SDRAM Interval Configuration */ + u32 sdram_data_init; /* SDRAM Data initialization */ + u32 resv7[1]; + u32 sdram_clk_cntl; /* SDRAM Clock Control */ + u32 resv8[5]; + u32 init_addr; /* training init addr */ + u32 init_ext_addr; /* training init extended addr */ + u32 resv9[4]; + u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */ + u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */ + u32 timing_cfg_6; /* SDRAM Timing Configuration 6 */ + u32 timing_cfg_7; /* SDRAM Timing Configuration 7 */ + u32 ddr_zq_cntl; /* ZQ calibration control*/ + u32 ddr_wrlvl_cntl; /* write leveling control*/ + u32 resv10[1]; + u32 ddr_sr_cntr; /* self refresvh counter */ + u32 ddr_sdram_rcw_1; /* Control Words 1 */ + u32 ddr_sdram_rcw_2; /* Control Words 2 */ + u32 resv11[2]; + u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */ + u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */ + u32 resv12[2]; + u32 ddr_sdram_rcw_3; /* Control Words 3 */ + u32 ddr_sdram_rcw_4; /* Control Words 4 */ + u32 ddr_sdram_rcw_5; /* Control Words 5 */ + u32 ddr_sdram_rcw_6; /* Control Words 6 */ + u32 resv13[20]; + u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */ + u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */ + u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */ + u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */ + u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */ + u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */ + u32 sdram_mode_9; /* SDRAM Mode Configuration 9 */ + u32 sdram_mode_10; /* SDRAM Mode Configuration 10 */ + u32 sdram_mode_11; /* SDRAM Mode Configuration 11 */ + u32 sdram_mode_12; /* SDRAM Mode Configuration 12 */ + u32 sdram_mode_13; /* SDRAM Mode Configuration 13 */ + u32 sdram_mode_14; /* SDRAM Mode Configuration 14 */ + u32 sdram_mode_15; /* SDRAM Mode Configuration 15 */ + u32 sdram_mode_16; /* SDRAM Mode Configuration 16 */ + u32 resv14[4]; + u32 timing_cfg_8; /* SDRAM Timing Configuration 8 */ + u32 timing_cfg_9; /* SDRAM Timing Configuration 9 */ + u32 resv15[2]; + u32 sdram_cfg_3; /* SDRAM Control Configuration 3 */ + u32 resv16[15]; + u32 deskew_cntl; /* SDRAM Deskew Control */ + u32 resv17[545]; + u32 ddr_dsr1; /* Debug Status 1 */ + u32 ddr_dsr2; /* Debug Status 2 */ + u32 ddr_cdr1; /* Control Driver 1 */ + u32 ddr_cdr2; /* Control Driver 2 */ + u32 resv18[50]; + u32 ip_rev1; /* IP Block Revision 1 */ + u32 ip_rev2; /* IP Block Revision 2 */ + u32 eor; /* Enhanced Optimization Register */ + u32 resv19[63]; + u32 mtcr; /* Memory Test Control Register */ + u32 resv20[7]; + u32 mtp1; /* Memory Test Pattern 1 */ + u32 mtp2; /* Memory Test Pattern 2 */ + u32 mtp3; /* Memory Test Pattern 3 */ + u32 mtp4; /* Memory Test Pattern 4 */ + u32 mtp5; /* Memory Test Pattern 5 */ + u32 mtp6; /* Memory Test Pattern 6 */ + u32 mtp7; /* Memory Test Pattern 7 */ + u32 mtp8; /* Memory Test Pattern 8 */ + u32 mtp9; /* Memory Test Pattern 9 */ + u32 mtp10; /* Memory Test Pattern 10 */ + u32 resv21[6]; + u32 ddr_mt_st_ext_addr; /* Memory Test Start Extended Address */ + u32 ddr_mt_st_addr; /* Memory Test Start Address */ + u32 ddr_mt_end_ext_addr; /* Memory Test End Extended Address */ + u32 ddr_mt_end_addr; /* Memory Test End Address */ + u32 resv22[36]; + u32 data_err_inject_hi; /* Data Path Err Injection Mask High */ + u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */ + u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */ + u32 resv23[5]; + u32 capture_data_hi; /* Data Path Read Capture High */ + u32 capture_data_lo; /* Data Path Read Capture Low */ + u32 capture_ecc; /* Data Path Read Capture ECC */ + u32 resv24[5]; + u32 err_detect; /* Error Detect */ + u32 err_disable; /* Error Disable */ + u32 err_int_en; + u32 capture_attributes; /* Error Attrs Capture */ + u32 capture_address; /* Error Addr Capture */ + u32 capture_ext_address; /* Error Extended Addr Capture */ + u32 err_sbe; /* Single-Bit ECC Error Management */ + u32 resv25[105]; +}; + +/* CCI-400 registers */ +struct ccsr_cci400 { + u32 ctrl_ord; /* Control Override */ + u32 spec_ctrl; /* Speculation Control */ + u32 secure_access; /* Secure Access */ + u32 status; /* Status */ + u32 impr_err; /* Imprecise Error */ + u8 res_14[0x100 - 0x14]; + u32 pmcr; /* Performance Monitor Control */ + u8 res_104[0xfd0 - 0x104]; + u32 pid[8]; /* Peripheral ID */ + u32 cid[4]; /* Component ID */ + struct { + u32 snoop_ctrl; /* Snoop Control */ + u32 sha_ord; /* Shareable Override */ + u8 res_1008[0x1100 - 0x1008]; + u32 rc_qos_ord; /* read channel QoS Value Override */ + u32 wc_qos_ord; /* read channel QoS Value Override */ + u8 res_1108[0x110c - 0x1108]; + u32 qos_ctrl; /* QoS Control */ + u32 max_ot; /* Max OT */ + u8 res_1114[0x1130 - 0x1114]; + u32 target_lat; /* Target Latency */ + u32 latency_regu; /* Latency Regulation */ + u32 qos_range; /* QoS Range */ + u8 res_113c[0x2000 - 0x113c]; + } slave[5]; /* Slave Interface */ + u8 res_6000[0x9004 - 0x6000]; + u32 cycle_counter; /* Cycle counter */ + u32 count_ctrl; /* Count Control */ + u32 overflow_status; /* Overflow Flag Status */ + u8 res_9010[0xa000 - 0x9010]; + struct { + u32 event_select; /* Event Select */ + u32 event_count; /* Event Count */ + u32 counter_ctrl; /* Counter Control */ + u32 overflow_status; /* Overflow Flag Status */ + u8 res_a010[0xb000 - 0xa010]; + } pcounter[4]; /* Performance Counter */ + u8 res_e004[0x10000 - 0xe004]; +}; +#endif /* __ASM_ARCH_LS102XA_IMMAP_H_ */ diff --git a/arch/arm/include/asm/arch-ls102xa/imx-regs.h b/arch/arm/include/asm/arch-ls102xa/imx-regs.h new file mode 100644 index 0000000..f9cd75b --- /dev/null +++ b/arch/arm/include/asm/arch-ls102xa/imx-regs.h @@ -0,0 +1,53 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#ifndef __ASM_ARCH_IMX_REGS_H__ +#define __ASM_ARCH_IMX_REGS_H__ + +#define I2C_QUIRK_REG /* enable 8-bit driver */ + +#ifdef CONFIG_LPUART_32B_REG +struct lpuart_fsl { + u32 baud; + u32 stat; + u32 ctrl; + u32 data; + u32 match; + u32 modir; + u32 fifo; + u32 water; +}; +#else +struct lpuart_fsl { + u8 ubdh; + u8 ubdl; + u8 uc1; + u8 uc2; + u8 us1; + u8 us2; + u8 uc3; + u8 ud; + u8 uma1; + u8 uma2; + u8 uc4; + u8 uc5; + u8 ued; + u8 umodem; + u8 uir; + u8 reserved; + u8 upfifo; + u8 ucfifo; + u8 usfifo; + u8 utwfifo; + u8 utcfifo; + u8 urwfifo; + u8 urcfifo; + u8 rsvd[28]; +}; +#endif + +#endif /* __ASM_ARCH_IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h index 2a20a77..6c8ea9f 100644 --- a/arch/arm/include/asm/config.h +++ b/arch/arm/include/asm/config.h @@ -17,4 +17,8 @@ #define CONFIG_STATIC_RELA #endif

+#ifdef CONFIG_LS102xA +#include <asm/arch/config.h> +#endif + #endif diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 9f35fd6..483f5f9 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -367,7 +367,12 @@ out: return retval; }

-#elif !defined(readb) +#else +#define memset_io(a, b, c) memset((void *)(a), (b), (c)) +#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c)) +#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c)) + +#if !defined(readb)

#define readb(addr) (__readwrite_bug("readb"),0) #define readw(addr) (__readwrite_bug("readw"),0) @@ -380,6 +385,7 @@ out:

#define check_signature(io,sig,len) (0)

+#endif #endif /* __mem_pci */

/* diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 06ced10..a869eae 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -7,7 +7,7 @@

obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o -ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 vf610)) +ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 vf610 ls102xa)) obj-y += imx_watchdog.o endif obj-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o

Signed-off-by: Alison Wang alison.wang@freescale.com --- Change log: v2: no change.

drivers/i2c/mxc_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index 48468d7..792fc40 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -423,7 +423,7 @@ static void * const i2c_bases[] = { (void *)IMX_I2C2_BASE #elif defined(CONFIG_MX31) || defined(CONFIG_MX35) || \ defined(CONFIG_MX51) || defined(CONFIG_MX53) || \ - defined(CONFIG_MX6) + defined(CONFIG_MX6) || defined(CONFIG_LS102xA) (void *)I2C1_BASE_ADDR, (void *)I2C2_BASE_ADDR, (void *)I2C3_BASE_ADDR

Signed-off-by: Alison Wang alison.wang@freescale.com --- Change log: v2: Add private mdio read and write support.

drivers/net/fsl_mdio.c | 24 +++++++++++++++++++----- drivers/net/tsec.c | 7 +++++++ include/fsl_mdio.h | 3 +++ include/tsec.h | 7 ++++++- 4 files changed, 35 insertions(+), 6 deletions(-)

diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c index 8d09f5d..3081228 100644 --- a/drivers/net/fsl_mdio.c +++ b/drivers/net/fsl_mdio.c @@ -12,6 +12,15 @@ #include <asm/io.h> #include <asm/errno.h>

+void tsec_mdio_sync(void) +{ +#if defined(CONFIG_PPC) + asm("sync"); +#elif defined(CONFIG_ARM) + asm("dsb"); +#endif +} + void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr, int dev_addr, int regnum, int value) { @@ -19,7 +28,7 @@ void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr,

out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f)); out_be32(&phyregs->miimcon, value); - asm("sync"); + tsec_mdio_sync();

while ((in_be32(&phyregs->miimind) & MIIMIND_BUSY) && timeout--) ; @@ -37,11 +46,11 @@ int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int port_addr,

/* Clear the command register, and wait */ out_be32(&phyregs->miimcom, 0); - asm("sync"); + tsec_mdio_sync();

/* Initiate a read command, and wait */ out_be32(&phyregs->miimcom, MIIMCOM_READ_CYCLE); - asm("sync"); + tsec_mdio_sync();

/* Wait for the the indication that the read is done */ while ((in_be32(&phyregs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)) @@ -98,8 +107,13 @@ int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info) return -1; }

- bus->read = tsec_phy_read; - bus->write = tsec_phy_write; + if (info->priv_mdio_read) { + bus->read = info->priv_mdio_read; + bus->write = info->priv_mdio_write; + } else { + bus->read = tsec_phy_read; + bus->write = tsec_phy_write; + } bus->reset = fsl_pq_mdio_reset; sprintf(bus->name, info->name);

diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index e9138f0..a220221 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -20,6 +20,7 @@ #include <fsl_mdio.h> #include <asm/errno.h> #include <asm/processor.h> +#include <asm/io.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -270,6 +271,9 @@ void redundant_init(struct eth_device *dev) out_be32(&regs->tstat, TSTAT_CLEAR_THALT); out_be32(&regs->rstat, RSTAT_CLEAR_RHALT); clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS); +#ifdef CONFIG_LS102xA + setbits_be32(&regs->dmactrl, DMACTRL_LE); +#endif

do { uint16_t status; @@ -366,6 +370,9 @@ static void startup_tsec(struct eth_device *dev) out_be32(&regs->tstat, TSTAT_CLEAR_THALT); out_be32(&regs->rstat, RSTAT_CLEAR_RHALT); clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS); +#ifdef CONFIG_LS102xA + setbits_be32(&regs->dmactrl, DMACTRL_LE); +#endif }

/* This returns the status bits of the device. The return value diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h index a531edf..fb7df08 100644 --- a/include/fsl_mdio.h +++ b/include/fsl_mdio.h @@ -57,6 +57,9 @@ int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, struct fsl_pq_mdio_info { struct tsec_mii_mng __iomem *regs; char *name; + int (*priv_mdio_read)(struct mii_dev *bus, int addr, int devad, int reg); + int (*priv_mdio_write)(struct mii_dev *bus, int addr, int devad, int reg, + u16 val); }; int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info);

diff --git a/include/tsec.h b/include/tsec.h index 2054715..5b74f67 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -20,10 +20,14 @@ #include <net.h> #include <config.h> #include <phy.h> -#include <fsl_mdio.h>

+#ifdef CONFIG_LS102xA +#define TSEC_SIZE 0x40000 +#define TSEC_MDIO_OFFSET 0x40000 +#else #define TSEC_SIZE 0x01000 #define TSEC_MDIO_OFFSET 0x01000 +#endif

#define CONFIG_SYS_MDIO_BASE_ADDR (MDIO_BASE_ADDR + 0x520)

@@ -128,6 +132,7 @@ #define DMACTRL_INIT_SETTINGS 0x000000c3 #define DMACTRL_GRS 0x00000010 #define DMACTRL_GTS 0x00000008 +#define DMACTRL_LE 0x00008000

#define TSTAT_CLEAR_THALT 0x80000000 #define RSTAT_CLEAR_RHALT 0x00800000

From: York Sun yorksun@freescale.com

If less than 8 ECC pins are used for DDR data bus width smaller than 64 bits, the 8-bit ECC code will be transmitted/received across several beats, and it will be used to check 64-bits of data once 8-bits of ECC are accumulated.

Signed-off-by: York Sun yorksun@freescale.com --- Change log: v2: no change.

drivers/ddr/fsl/ctrl_regs.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index dcf6287..fa9c257 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -693,6 +693,7 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr, unsigned int x32_en = 0; /* x32 enable */ unsigned int pchb8 = 0; /* precharge bit 8 enable */ unsigned int hse; /* Global half strength override */ + unsigned int acc_ecc_en = 0; /* Accumulated ECC enable */ unsigned int mem_halt = 0; /* memory controller halt */ unsigned int bi = 0; /* Bypass initialization */

@@ -736,6 +737,9 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr, ba_intlv_ctl = popts->ba_intlv_ctl; hse = popts->half_strength_driver_enable;

+ /* set when ddr bus width < 64 */ + acc_ecc_en = (dbw != 0 && ecc_en == 1) ? 1 : 0; + ddr->ddr_sdram_cfg = (0 | ((mem_en & 0x1) << 31) | ((sren & 0x1) << 30) @@ -752,6 +756,7 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr, | ((x32_en & 0x1) << 5) | ((pchb8 & 0x1) << 4) | ((hse & 0x1) << 3) + | ((acc_ecc_en & 0x1) << 2) | ((mem_halt & 0x1) << 1) | ((bi & 0x1) << 0) );

From: York Sun yorksun@freescale.com

JEDEC spec allows DRAM vendors to use prime DQ for write leveling. This is not an issue unless some DQ pins are not connected. If a platform uses regular DIMMs but with reduced DDR ECC pins, the prime DQ may end up on those floating pins for the second rank. The workaround is to use a known good chip select for this purpose.

Signed-off-by: York Sun yorksun@freescale.com --- Change log: v2: no change.

drivers/ddr/fsl/ctrl_regs.c | 3 +++ drivers/ddr/fsl/interactive.c | 2 ++ include/fsl_ddr_sdram.h | 2 ++ 3 files changed, 7 insertions(+)

diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index fa9c257..462d471 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -2273,6 +2273,9 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, if (ip_rev > 0x40400) unq_mrs_en = 1;

+ if (ip_rev > 0x40700) + ddr->debug[18] = popts->cswl_override; + set_ddr_sdram_cfg_2(ddr, popts, unq_mrs_en); set_ddr_sdram_mode(ddr, popts, common_dimm, cas_latency, additive_latency, unq_mrs_en); diff --git a/drivers/ddr/fsl/interactive.c b/drivers/ddr/fsl/interactive.c index 7fb4187..6aa16b2 100644 --- a/drivers/ddr/fsl/interactive.c +++ b/drivers/ddr/fsl/interactive.c @@ -511,6 +511,7 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS(wrlvl_override), CTRL_OPTIONS(wrlvl_sample), CTRL_OPTIONS(wrlvl_start), + CTRL_OPTIONS(cswl_override), CTRL_OPTIONS(rcw_override), CTRL_OPTIONS(rcw_1), CTRL_OPTIONS(rcw_2), @@ -801,6 +802,7 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(wrlvl_override), CTRL_OPTIONS(wrlvl_sample), CTRL_OPTIONS(wrlvl_start), + CTRL_OPTIONS_HEX(cswl_override), CTRL_OPTIONS(rcw_override), CTRL_OPTIONS(rcw_1), CTRL_OPTIONS(rcw_2), diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h index e8a2db9..987119b 100644 --- a/include/fsl_ddr_sdram.h +++ b/include/fsl_ddr_sdram.h @@ -281,6 +281,7 @@ typedef struct memctl_options_partial_s { #define DDR_DATA_BUS_WIDTH_64 0 #define DDR_DATA_BUS_WIDTH_32 1 #define DDR_DATA_BUS_WIDTH_16 2 +#define DDR_CSWL_CS0 0x04000001 /* * Generalized parameters for memory controller configuration, * might be a little specific to the FSL memory controller @@ -340,6 +341,7 @@ typedef struct memctl_options_s { unsigned int cpo_override; unsigned int write_data_delay; /* DQS adjust */

+ unsigned int cswl_override; unsigned int wrlvl_override; unsigned int wrlvl_sample; /* Write leveling */ unsigned int wrlvl_start;

Signed-off-by: Yuan Yao yao.yuan@freescale.com Signed-off-by: Alison Wang alison.wang@freescale.com --- Change log: v2: New file.

board/freescale/ls1021atwr/Makefile | 7 + board/freescale/ls1021atwr/README | 109 +++++++ board/freescale/ls1021atwr/ls1021atwr.c | 499 ++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/ls1021atwr.h | 285 ++++++++++++++++++ 5 files changed, 901 insertions(+) create mode 100644 board/freescale/ls1021atwr/Makefile create mode 100644 board/freescale/ls1021atwr/README create mode 100644 board/freescale/ls1021atwr/ls1021atwr.c create mode 100644 include/configs/ls1021atwr.h

diff --git a/board/freescale/ls1021atwr/Makefile b/board/freescale/ls1021atwr/Makefile new file mode 100644 index 0000000..b5df668 --- /dev/null +++ b/board/freescale/ls1021atwr/Makefile @@ -0,0 +1,7 @@ +# +# Copyright 2014 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ls1021atwr.o diff --git a/board/freescale/ls1021atwr/README b/board/freescale/ls1021atwr/README new file mode 100644 index 0000000..d2821cb --- /dev/null +++ b/board/freescale/ls1021atwr/README @@ -0,0 +1,109 @@ +Overview +-------- +The LS1021ATWR is a Freescale reference board that hosts the LS1021A SoC. + +LS1021A SoC Overview +------------------ +The QorIQ LS1 family, which includes the LS1021A communications processor, +is built on Layerscape architecture, the industry's first software-aware, +core-agnostic networking architecture to offer unprecedented efficiency +and scale. + +A member of the value-performance tier, the QorIQ LS1021A processor provides +extensive integration and power efficiency for fanless, small form factor +enterprise networking applications. Incorporating dual ARM Cortex-A7 cores +running up to 1.0 GHz, the LS1021A processor delivers pre-silicon CoreMark +performance of over 6,000, as well as virtualization support, advanced +security features and the broadest array of high-speed interconnects and +optimized peripheral features ever offered in a sub-3 W processor. + +The QorIQ LS1021A processor features an integrated LCD controller, +CAN controller for implementing industrial protocols, DDR3L/4 running +up to 1600 MHz, integrated security engine and QUICC Engine, and ECC +protection on both L1 and L2 caches. The LS1021A processor is pin- and +software-compatible with the QorIQ LS1020A and LS1022A processors. + +The LS1021A SoC includes the following function and features: + + - ARM Cortex-A7 MPCore compliant with ARMv7-A architecture + - Dual high-preformance ARM Cortex-A7 cores, each core includes: + - 32 Kbyte L1 Instruction Cache and Data Cache for each core (ECC protection) + - 512 Kbyte shared coherent L2 Cache (with ECC protection) + - NEON Co-processor (per core) + - 40-bit physical addressing + - Vector floating-point support + - ARM Core-Link CCI-400 Cache Coherent Interconnect + - One DDR3L/DDR4 SDRAM memory controller with x8/x16/x32-bit configuration + supporting speeds up to 1600Mtps + - ECC and interleaving support + - VeTSEC Ethernet complex + - Up to 3x virtualized 10/100/1000 Ethernet controllers + - MII, RMII, RGMII, and SGMII support + - QoS, lossless flow control, and IEEE 1588 support + - 4-lane 6GHz SerDes + - High speed interconnect (4 SerDes lanes with are muxed for these protocol) + - Two PCI Express Gen2 controllers running at up to 5 GHz + - One Serial ATA 3.0 supporting 6 GT/s operation + - Two SGMII interfaces supporting 1000 Mbps + - Additional peripheral interfaces + - One high-speed USB 3.0 controller with integrated PHY and one high-speed + USB 2.00 controller with ULPI + - Integrated flash controller (IFC) with 16-bit interface + - Quad SPI NOR Flash + - One enhanced Secure digital host controller + - Display controller unit (DCU) 24-bit RGB (12-bit DDR pin interface) + - Ten UARTs comprised of two 16550 compliant DUARTs, and six low power + UARTs + - Three I2C controllers + - Eight FlexTimers four supporting PWM and four FlexCAN ports + - Four GPIO controllers supporting up to 109 general purpose I/O signals + - Integrated advanced audio block: + - Four synchronous audio interfaces (SAI) + - Sony/Philips Digital Interconnect Format (SPDIF) + - Asynchronous Sample Rate Converter (ASRC) + - Hardware based crypto offload engine + - IPSec forwarding at up to 1Gbps + - QorIQ Trust Architecture, Secure Boot, and ARM TrustZone supported + - Public key hardware accelerator + - True Random Number Generator (NIST Certified) + - Advanced Encryption Standard Accelerators (AESA) + - Data Encryption Standard Accelerators + - QUICC Engine ULite block + - Two universal communication controllers (TDM and HDLC) supporting 64 + multichannels, each running at 64 Kbps + - Support for 256 channels of HDLC + - QorIQ TrustArchitecture with Secure Boot, as well as ARM TrustZone supported + +LS1021ATWR board Overview +------------------------- + - DDR Controller + - Supports rates of up to 1600 MHz data-rate + - Supports one DDR3LP SDRAM. + - IFC/Local Bus + - NOR: 128MB 16-bit NOR Flash + - Ethernet + - Three on-board RGMII 10/100/1G ethernet ports. + - CPLD + - Clocks + - System and DDR clock (SYSCLK, DDRCLK) + - SERDES clocks + - Power Supplies + - SDHC + - SDHC/SDXC connector + - Other IO + - One Serial port + - Three I2C ports + +Memory map +----------- +The addresses in brackets are physical addresses. + +Start Address End Address Description Size +0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB +0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB +0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB +0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB +0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB +0x00_4000_0000 0x00_5FFF_FFFF QSPI 512MB +0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB +0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c new file mode 100644 index 0000000..3de5b83 --- /dev/null +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -0,0 +1,499 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> +#include <asm/arch/immap_ls102xa.h> +#include <asm/arch/clock.h> +#include <asm/arch/fsl_serdes.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <fsl_ifc.h> +#include <netdev.h> +#include <fsl_mdio.h> +#include <tsec.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define VERSION_MASK 0x00FF +#define BANK_MASK 0x0001 +#define CONFIG_RESET 0x1 +#define INIT_RESET 0x1 + +#define CPLD_SET_MUX_SERDES 0x20 +#define CPLD_SET_BOOT_BANK 0x40 + +#define BOOT_FROM_UPPER_BANK 0x0 +#define BOOT_FROM_LOWER_BANK 0x1 + +#define LANEB_SATA (0x01) +#define LANEB_SGMII1 (0x02) +#define LANEC_SGMII1 (0x04) +#define LANEC_PCIEX1 (0x08) +#define LANED_PCIEX2 (0x10) +#define LANED_SGMII2 (0x20) + +#define MASK_LANE_B 0x1 +#define MASK_LANE_C 0x2 +#define MASK_LANE_D 0x4 +#define MASK_SGMII 0x8 + +#define KEEP_STATUS 0x0 +#define NEED_RESET 0x1 + + +struct cpld_data { + u8 cpld_ver; /* cpld revision */ + u8 cpld_ver_sub; /* cpld sub revision */ + u8 pcba_ver; /* pcb revision number */ + u8 system_rst; /* reset system by cpld */ + u8 soft_mux_on; /* CPLD override physical switches Enable */ + u8 cfg_rcw_src1; /* Reset config word 1 */ + u8 cfg_rcw_src2; /* Reset config word 2 */ + u8 vbank; /* Flash bank selection Control */ + u8 gpio; /* GPIO for TWR-ELEV */ + u8 i2c3_ifc_mux; + u8 mux_spi2; + u8 can3_usb2_mux; /* CAN3 and USB2 Selection */ + u8 qe_lcd_mux; /* QE and LCD Selection */ + u8 serdes_mux; /* Multiplexed pins for SerDes Lanes */ + u8 global_rst; /* reset with init CPLD reg to default */ + u8 rev1; /* Reserved */ + u8 rev2; /* Reserved */ +}; + +static void convert_serdes_mux(int type, int need_reset); + +void cpld_show(void) +{ + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + printf("CPLD: V%x.%x\nPCBA: V%x.0\nVBank: %d\n", + in_8(&cpld_data->cpld_ver) & VERSION_MASK, + in_8(&cpld_data->cpld_ver_sub) & VERSION_MASK, + in_8(&cpld_data->pcba_ver) & VERSION_MASK, + in_8(&cpld_data->vbank) & BANK_MASK); + +#ifdef CONFIG_DEBUG + printf("soft_mux_on =%x\n", + in_8(&cpld_data->soft_mux_on)); + printf("soft_mux_on =%x\n", + in_8(&cpld_data->soft_mux_on)); + printf("cfg_rcw_src1 =%x\n", + in_8(&cpld_data->cfg_rcw_src1)); + printf("cfg_rcw_src2 =%x\n", + in_8(&cpld_data->cfg_rcw_src2)); + printf("vbank =%x\n", + in_8(&cpld_data->vbank)); + printf("gpio =%x\n", + in_8(&cpld_data->gpio)); + printf("i2c3_ifc_mux =%x\n", + in_8(&cpld_data->i2c3_ifc_mux)); + printf("mux_spi2 =%x\n", + in_8(&cpld_data->mux_spi2)); + printf("can3_usb2_mux =%x\n", + in_8(&cpld_data->can3_usb2_mux)); + printf("qe_lcd_mux =%x\n", + in_8(&cpld_data->qe_lcd_mux)); + printf("serdes_mux =%x\n", + in_8(&cpld_data->serdes_mux)); +#endif +} + +int checkboard(void) +{ + puts("Board: LS1021ATWR\n"); + cpld_show(); + + return 0; +} + +void ddrmc_init(void) +{ + struct ccsr_ddr *ddr = (struct ccsr_ddr *)CONFIG_SYS_FSL_DDR_ADDR; + + out_be32(&ddr->sdram_cfg, 0x470c0008); + + out_be32(&ddr->cs0_bnds, 0x008000bf); + out_be32(&ddr->cs0_config, 0x80014302); + + out_be32(&ddr->timing_cfg_0, 0x50550004); + out_be32(&ddr->timing_cfg_1, 0xbcb38c56); + out_be32(&ddr->timing_cfg_2, 0x0040d120); + out_be32(&ddr->timing_cfg_3, 0x010e1000); + out_be32(&ddr->timing_cfg_4, 0x00000001); + out_be32(&ddr->timing_cfg_5, 0x03401400); + + out_be32(&ddr->sdram_cfg_2, 0x00401010); + + out_be32(&ddr->sdram_mode, 0x00061c60); + out_be32(&ddr->sdram_mode_2, 0x00180000); + + out_be32(&ddr->sdram_interval, 0x18600618); + + out_be32(&ddr->ddr_wrlvl_cntl, 0x8655f605); + + out_be32(&ddr->ddr_wrlvl_cntl_2, 0x05060607); + out_be32(&ddr->ddr_wrlvl_cntl_3, 0x05050505); + + out_be32(&ddr->ddr_cdr1, 0x80040000); + out_be32(&ddr->ddr_cdr2, 0x00000001); + + out_be32(&ddr->sdram_clk_cntl, 0x02000000); + out_be32(&ddr->ddr_zq_cntl, 0x89080600); + + out_be32(&ddr->cs0_config_2, 0x00000000); + udelay(1); + out_be32(&ddr->sdram_cfg, 0xc70c0008); + + return; +} + +int dram_init(void) +{ +#if (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) + ddrmc_init(); +#endif + + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + return 0; +} + +#ifdef CONFIG_FSL_ESDHC +struct fsl_esdhc_cfg esdhc_cfg[1] = { + {CONFIG_SYS_FSL_ESDHC_ADDR}, +}; + +int board_mmc_init(bd_t *bis) +{ + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + + return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); +} +#endif + +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) +{ + struct fsl_pq_mdio_info mdio_info; + struct tsec_info_struct tsec_info[4]; + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + if (is_serdes_configured(SGMII_TSEC1)) { + puts("eTSEC1 is in sgmii mode.\n"); + tsec_info[num].flags |= TSEC_SGMII; + } + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + if (is_serdes_configured(SGMII_TSEC2)) { + puts("eTSEC2 is in sgmii mode.\n"); + tsec_info[num].flags |= TSEC_SGMII; + } + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + num++; +#endif + if (!num) { + printf("No TSECs initialized\n"); + return 0; + } + + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + fsl_pq_mdio_init(bis, &mdio_info); + + tsec_eth_init(bis, tsec_info, num); + + return pci_eth_init(bis); +} +#endif + +int config_serdes_mux(void) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 protocol = in_be32(&gur->rcwsr[4]) & RCWSR4_SRDS1_PRTCL_MASK; + + protocol >>= RCWSR4_SRDS1_PRTCL_SHIFT; + switch (protocol) { + case 0x10: + convert_serdes_mux(LANEB_SATA, KEEP_STATUS); + convert_serdes_mux(LANED_PCIEX2 | + LANEC_PCIEX1, KEEP_STATUS); + break; + case 0x20: + convert_serdes_mux(LANEB_SGMII1, KEEP_STATUS); + convert_serdes_mux(LANEC_PCIEX1, KEEP_STATUS); + convert_serdes_mux(LANED_SGMII2, KEEP_STATUS); + break; + case 0x30: + convert_serdes_mux(LANEB_SATA, KEEP_STATUS); + convert_serdes_mux(LANEC_SGMII1, KEEP_STATUS); + convert_serdes_mux(LANED_SGMII2, KEEP_STATUS); + break; + case 0x70: + convert_serdes_mux(LANEB_SATA, KEEP_STATUS); + convert_serdes_mux(LANEC_PCIEX1, KEEP_STATUS); + convert_serdes_mux(LANED_SGMII2, KEEP_STATUS); + break; + } + + return 0; +} + +int board_early_init_f(void) +{ + struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + +#ifdef CONFIG_TSEC_ENET + out_be32(&scfg->etsecdmamcr, 0xf058001f); + + out_be32(&scfg->scfgrevcr, 0xffffffff); + out_be32(&scfg->etsecmcr, 0x04000000); + udelay(10); + out_be32(&scfg->scfgrevcr, 0x00000000); +#endif + +#ifdef CONFIG_FSL_IFC + init_early_memctl_regs(); +#endif + + out_le32(&cci->ctrl_ord, 0x00000008); + + return 0; +} + +int board_init(void) +{ + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + + out_le32(&cci->ctrl_ord, 0); + + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + +#ifndef CONFIG_SYS_FSL_NO_SERDES + fsl_serdes_init(); + config_serdes_mux(); +#endif + + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); +} + +u8 flash_read8(void *addr) +{ + return __raw_readb(addr + 1); +} + +void flash_write16(u16 val, void *addr) +{ + u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00)); + __raw_writew(shftval, addr); +} + +u16 flash_read16(void *addr) +{ + u16 val = __raw_readw(addr); + return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00); +} + +static void convert_flash_bank(char bank) +{ + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + printf("Now switch to boot from flash bank %d.\n", bank); + cpld_data->soft_mux_on = CPLD_SET_BOOT_BANK; + cpld_data->vbank = bank; + + printf("Reset board to enable configuration.\n"); + cpld_data->system_rst = CONFIG_RESET; + return; +} + +static int flash_bank_cmd(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + if (argc != 2) + return CMD_RET_USAGE; + if (strcmp(argv[1], "0") == 0) + convert_flash_bank(BOOT_FROM_UPPER_BANK); + else if (strcmp(argv[1], "1") == 0) + convert_flash_bank(BOOT_FROM_LOWER_BANK); + else + return CMD_RET_USAGE; + + return 0; +} + +U_BOOT_CMD( + boot_bank, 2, 0, flash_bank_cmd, + "Flash bank Selection Control", + "bank[0-upper bank/1-lower bank] (e.g. boot_bank 0)" +); + +static int cpld_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + if (argc > 2) + return CMD_RET_USAGE; + if ((argc == 1) || (strcmp(argv[1], "conf") == 0)) + cpld_data->system_rst = CONFIG_RESET; + else if (strcmp(argv[1], "init") == 0) + cpld_data->global_rst = INIT_RESET; + else + return CMD_RET_USAGE; + + return 0; +} + +U_BOOT_CMD( + cpld_reset, 2, 0, cpld_reset_cmd, + "Reset via CPLD", + "conf\n" + " -reset with current CPLD configuration\n" + "init\n" + " -reset and initial CPLD configuration with default value" + +); + +static void convert_serdes_mux(int type, int need_reset) +{ + char current_serdes; + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + current_serdes = cpld_data->serdes_mux; + + switch (type) { + case LANEB_SATA: + current_serdes &= ~MASK_LANE_B; + break; + case LANEB_SGMII1: + current_serdes |= (MASK_LANE_B | MASK_SGMII | MASK_LANE_C); + break; + case LANEC_SGMII1: + current_serdes &= ~(MASK_LANE_B | MASK_SGMII | MASK_LANE_C); + break; + case LANED_SGMII2: + current_serdes |= MASK_LANE_D; + break; + case LANEC_PCIEX1: + current_serdes |= MASK_LANE_C; + break; + case (LANED_PCIEX2 | LANEC_PCIEX1): + current_serdes |= MASK_LANE_C; + current_serdes &= ~MASK_LANE_D; + break; + default: + printf("CPLD serdes MUX: unsupported MUX type 0x%x\n", type); + return; + } + + cpld_data->soft_mux_on |= CPLD_SET_MUX_SERDES; + cpld_data->serdes_mux = current_serdes; + + if (need_reset == 1) { + printf("Reset board to enable configuration\n"); + cpld_data->system_rst = CONFIG_RESET; + } + return; +} + +void print_serdes_mux(void) +{ + char current_serdes; + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + current_serdes = cpld_data->serdes_mux; + + printf("Serdes Lane B: "); + if ((current_serdes & MASK_LANE_B) == 0) + printf("SATA,\n"); + else + printf("SGMII 1,\n"); + + printf("Serdes Lane C: "); + if ((current_serdes & MASK_LANE_C) == 0) + printf("SGMII 1,\n"); + else + printf("PCIe,\n"); + + printf("Serdes Lane D: "); + if ((current_serdes & MASK_LANE_D) == 0) + printf("PCIe,\n"); + else + printf("SGMII 2,\n"); + + printf("SGMII 1 is on lane "); + if ((current_serdes & MASK_SGMII) == 0) + printf("C.\n"); + else + printf("B.\n"); + + return; +} + +static int serdes_mux_cmd(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + if (argc != 2) + return CMD_RET_USAGE; + if (strcmp(argv[1], "sata") == 0) { + printf("Set serdes lane B to SATA.\n"); + convert_serdes_mux(LANEB_SATA, NEED_RESET); + } else if (strcmp(argv[1], "sgmii1b") == 0) { + printf("Set serdes lane B to SGMII 1.\n"); + convert_serdes_mux(LANEB_SGMII1, NEED_RESET); + } else if (strcmp(argv[1], "sgmii1c") == 0) { + printf("Set serdes lane C to SGMII 1.\n"); + convert_serdes_mux(LANEC_SGMII1, NEED_RESET); + } else if (strcmp(argv[1], "sgmii2") == 0) { + printf("Set serdes lane D to SGMII 2.\n"); + convert_serdes_mux(LANED_SGMII2, NEED_RESET); + } else if (strcmp(argv[1], "pciex1") == 0) { + printf("Set serdes lane C to PCIe X1.\n"); + convert_serdes_mux(LANEC_PCIEX1, NEED_RESET); + } else if (strcmp(argv[1], "pciex2") == 0) { + printf("Set serdes lane C & lane D to PCIe X2.\n"); + convert_serdes_mux((LANED_PCIEX2 | LANEC_PCIEX1), NEED_RESET); + } else if (strcmp(argv[1], "show") == 0) { + print_serdes_mux(); + } else + return CMD_RET_USAGE; + + return 0; +} + +U_BOOT_CMD( + lane_bank, 2, 0, serdes_mux_cmd, + "Multiplexed function setting for SerDes Lanes", + "sata\n" + " -change lane B to sata\n" + "lane_bank sgmii1b\n" + " -change lane B to SGMII1\n" + "lane_bank sgmii1c\n" + " -change lane C to SGMII1\n" + "lane_bank sgmii2\n" + " -change lane D to SGMII2\n" + "lane_bank pciex1\n" + " -change lane C to PCIeX1\n" + "lane_bank pciex2\n" + " -change lane C & lane D to PCIeX2\n" + "\nWARNING: If you aren't familiar with the setting of serdes, don't try to change anything!\n" +); diff --git a/boards.cfg b/boards.cfg index 4f15423..d3e1f93 100644 --- a/boards.cfg +++ b/boards.cfg @@ -297,6 +297,7 @@ Active arm armv7 exynos samsung universal_c210 Active arm armv7 highbank - highbank highbank - Rob Herring robh@kernel.org Active arm armv7 keystone ti k2hk_evm k2hk_evm - Vitaly Andrianov vitalya@ti.com Active arm armv7 ls102xa freescale ls1021aqds ls1021aqds_nor ls1021aqds Alison Wang alison.wang@freescale.com +Active arm armv7 ls102xa freescale ls1021atwr ls1021atwr_nor ls1021atwr Alison Wang alison.wang@freescale.com Active arm armv7 mx5 denx m53evk m53evk m53evk:IMX_CONFIG=board/denx/m53evk/imximage.cfg Marek Vasut marek.vasut@gmail.com Active arm armv7 mx5 esg ima3-mx53 ima3-mx53 ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg - Active arm armv7 mx5 freescale mx51evk mx51evk mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg Stefano Babic sbabic@denx.de diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h new file mode 100644 index 0000000..e908d23 --- /dev/null +++ b/include/configs/ls1021atwr.h @@ -0,0 +1,285 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <config_cmd_default.h> + +#define CONFIG_LS102xA + +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) + +#define OCRAM_BASE_ADDR 0x10000000 +#define OCRAM_SIZE 0x00020000 + +#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE + +/* + * Generic Timer Definitions + */ +#define GENERIC_TIMER_CLK 12500000 + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 100000000 + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x67f80000 +#endif + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x80000000 +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_SYS_HAS_SERDES + +/* + * IFC Definitions + */ +#define CONFIG_FSL_IFC +#define CONFIG_SYS_FLASH_BASE 0x60000000 +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) + +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_TRHZ_80) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TAVDS(0x0) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) | \ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWP(0x1c) | \ + FTIM2_NOR_TWPH(0x0e)) +#define CONFIG_SYS_NOR_FTIM3 0 + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} + +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS + + +/* CPLD */ + +#define CONFIG_SYS_CPLD_BASE 0x7fb00000 +#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE + +#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) +#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) +#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_NOR_MODE_AVD_NOR | \ + CSOR_NOR_TRHZ_80) + +/* CPLD Timing parameters for IFC GPCM */ +#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \ + FTIM0_GPCM_TEADC(0xf) | \ + FTIM0_GPCM_TEAHC(0xf)) +#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ + FTIM2_GPCM_TCH(0xf) | \ + FTIM2_GPCM_TWP(0xff)) +#define CONFIG_SYS_FPGA_FTIM3 0x0 +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3 + +#endif + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + +#define CONFIG_BAUDRATE 115200 + +/* + * I2C + */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC + +/* + * I2C bus multiplexer + */ +#define I2C_MUX_PCA_ADDR_PRI 0x77 +#define I2C_MUX_CH_DEFAULT 0x8 + +/* + * MMC + */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_GENERIC_MMC + +/* + * eTSEC + */ +#define CONFIG_TSEC_ENET + +#ifdef CONFIG_TSEC_ENET +#define CONFIG_MII +#define CONFIG_MII_DEFAULT_TSEC 1 +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" + +#define TSEC1_PHY_ADDR 2 +#define TSEC2_PHY_ADDR 0 +#define TSEC3_PHY_ADDR 1 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC3_PHYIDX 0 + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS + +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH2 +#endif + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#define CONFIG_CMDLINE_TAG +#define CONFIG_CMDLINE_EDITING +#undef CONFIG_CMD_IMLS + +#define CONFIG_HWCONFIG +#define HWCONFIG_BUFFER_SIZE 128 + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ + "initrd_high=0xcfffffff\0" \ + "fdt_high=0xcfffffff\0" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#define CONFIG_SYS_LOAD_ADDR 0x82000000 +#define CONFIG_SYS_HZ 1000 + +/* + * Stack sizes + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (30 * 1024) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ + +/* + * Environment + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ + +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_CMD_BOOTZ