New subject: [PATCH 2/9] Clarify CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW in Kconfig

11 Dec 2021

With the relevant platforms removed, drop this file.
Signed-off-by: Tom Rini trini@konsulko.com
---
 include/configs/tam3517-common.h | 281 -------------------------------
 1 file changed, 281 deletions(-)
 delete mode 100644 include/configs/tam3517-common.h

diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
deleted file mode 100644
index a47e2c5b2859..000000000000
--- a/include/configs/tam3517-common.h
+++ /dev/null
@@ -1,281 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- *
- * Copyright (C) 2009 TechNexion Ltd.
- */
-
-#ifndef __TAM3517_H
-#define __TAM3517_H
-
-/*
- * High Level Configuration Options
- */
-
-#include <asm/arch/cpu.h>		/* get chip and board defs */
-#include <asm/arch/omap.h>
-
-/* Clock Defines */
-#define V_OSCK			26000000	/* Clock output from T2 */
-#define V_SCLK			(V_OSCK >> 1)
-
-/*
- * DDR related
- */
-#define CONFIG_SYS_CS0_SIZE		(256 * 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		48000000	/* 48MHz (APLL96/2) */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
-					115200}
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
-
-/*
- * Board NAND Info.
- */
-#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
-							/* to access */
-							/* nand at CS0 */
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
-							/* NAND devices */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-
-#define CONFIG_SYS_MAXARGS		32	/* max number of command */
-						/* args */
-
-/*
- * AM3517 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
-#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-
-/*
- * Physical Memory Map
- */
-#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
-
-/*
- * FLASH and environment organization
- */
-
-/* **** PISMO SUPPORT *** */
-
-/* Redundant Environment */
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-
-/*
- * ethernet support, EMAC
- *
- */
-#define CONFIG_NET_RETRY_COUNT 10
-
-/* Defines for SPL */
-#define CONFIG_SPL_CONSOLE
-#define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SPL_NAND_WORKSPACE	0x8f07f000 /* below BSS */
-
-#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
-					 CONFIG_SPL_TEXT_BASE)
-#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
-
-#define CONFIG_SYS_SPL_MALLOC_START	0x8f000000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
-#define CONFIG_SPL_BSS_START_ADDR	0x8f080000 /* end of RAM */
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-
-/* FAT */
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME		"uImage"
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME		"args"
-
-/* RAW SD card / eMMC */
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x80	/* address 0x10000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */
-
-/* NAND boot config */
-#define CONFIG_SYS_NAND_ECCPOS		{40, 41, 42, 43, 44, 45, 46, 47,\
-					 48, 49, 50, 51, 52, 53, 54, 55,\
-					 56, 57, 58, 59, 60, 61, 62, 63}
-#define CONFIG_SYS_NAND_ECCSIZE		256
-#define CONFIG_SYS_NAND_ECCBYTES	3
-
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
-
-/* Setup MTD for NAND on the SOM */
-
-#define	CONFIG_TAM3517_SETTINGS						\
-	"netdev=eth0\0"							\
-	"nandargs=setenv bootargs root=${nandroot} "			\
-		"rootfstype=${nandrootfstype}\0"			\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip_sta=setenv bootargs ${bootargs} "			\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
-	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
-		"else run addip_sta;fi\0"				\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=ttyO0,${baudrate}\0"				\
-	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
-	"loadaddr=82000000\0"						\
-	"kernel_addr_r=82000000\0"					\
-	"hostname=" CONFIG_HOSTNAME "\0"			\
-	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
-	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr}\0"				\
-	"nandboot=run nandargs addip addtty addmtd addmisc;"		\
-		"nand read ${kernel_addr_r} kernel\0"			\
-		"bootm ${kernel_addr_r}\0"				\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
-		"run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r}\0"				\
-	"net_self=if run net_self_load;then "				\
-		"run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
-		"else echo Images not loades;fi\0"			\
-	"u-boot=" CONFIG_HOSTNAME "/u-boot.img\0"		\
-	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"loadmlo=tftp ${loadaddr} ${mlo}\0"				\
-	"mlo=" CONFIG_HOSTNAME "/MLO\0"			\
-	"uboot_addr=0x80000\0"						\
-	"update=nandecc sw;nand erase ${uboot_addr} 100000;"		\
-		"nand write ${loadaddr} ${uboot_addr} 80000\0"		\
-	"updatemlo=nandecc hw;nand erase 0 20000;"			\
-		"nand write ${loadaddr} 0 20000\0"			\
-	"upd=if run load;then echo Updating u-boot;if run update;"	\
-		"then echo U-Boot updated;"				\
-			"else echo Error updating u-boot !;"		\
-			"echo Board without bootloader !!;"		\
-		"fi;"							\
-		"else echo U-Boot not downloaded..exiting;fi\0"		\
-
-/*
- * this is common code for all TAM3517 boards.
- * MAC address is stored from manufacturer in
- * I2C EEPROM
- */
-#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
-/*
- * The I2C EEPROM on the TAM3517 contains
- * mac address and production data
- */
-struct tam3517_module_info {
-	char customer[48];
-	char product[48];
-
-	/*
-	 * bit 0~47  : sequence number
-	 * bit 48~55 : week of year, from 0.
-	 * bit 56~63 : year
-	 */
-	unsigned long long sequence_number;
-
-	/*
-	 * bit 0~7   : revision fixed
-	 * bit 8~15  : revision major
-	 * bit 16~31 : TNxxx
-	 */
-	unsigned int revision;
-	unsigned char eth_addr[4][8];
-	unsigned char _rev[100];
-};
-
-#define TAM3517_READ_EEPROM(info, ret) \
-do {								\
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \
-	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,		\
-		(void *)info, sizeof(*info)))			\
-		ret = 1;					\
-	else							\
-		ret = 0;					\
-} while (0)
-
-#define TAM3517_READ_MAC_FROM_EEPROM(info)			\
-do {								\
-	char buf[80], ethname[20];				\
-	int i;							\
-	memset(buf, 0, sizeof(buf));				\
-	for (i = 0 ; i < ARRAY_SIZE((info)->eth_addr); i++) {	\
-		sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X",	\
-			(info)->eth_addr[i][5],			\
-			(info)->eth_addr[i][4],			\
-			(info)->eth_addr[i][3],			\
-			(info)->eth_addr[i][2],			\
-			(info)->eth_addr[i][1],			\
-			(info)->eth_addr[i][0]);			\
-								\
-		if (i)						\
-			sprintf(ethname, "eth%daddr", i);	\
-		else						\
-			strcpy(ethname, "ethaddr");		\
-		printf("Setting %s from EEPROM with %s\n", ethname, buf);\
-		env_set(ethname, buf);				\
-	}							\
-} while (0)
-
-/* The following macros are taken from Technexion's documentation */
-#define TAM3517_sequence_number(info) \
-	((info)->sequence_number % 0x1000000000000LL)
-#define TAM3517_week_of_year(info) (((info)->sequence_number >> 48) % 0x100)
-#define TAM3517_year(info) ((info)->sequence_number >> 56)
-#define TAM3517_revision_fixed(info) ((info)->revision % 0x100)
-#define TAM3517_revision_major(info) (((info)->revision >> 8) % 0x100)
-#define TAM3517_revision_tn(info) ((info)->revision >> 16)
-
-#define TAM3517_PRINT_SOM_INFO(info)				\
-do {								\
-	printf("Vendor:%s\n", (info)->customer);		\
-	printf("SOM:   %s\n", (info)->product);			\
-	printf("SeqNr: %02llu%02llu%012llu\n",			\
-		TAM3517_year(info),				\
-		TAM3517_week_of_year(info),			\
-		TAM3517_sequence_number(info));			\
-	printf("Rev:   TN%u %u.%u\n",				\
-		TAM3517_revision_tn(info),			\
-		TAM3517_revision_major(info),			\
-		TAM3517_revision_fixed(info));			\
-} while (0)
-
-#endif
-
-#endif /* __TAM3517_H */
-- 
2.25.1


    

[PATCH 1/9] arm: Drop unused tam3517-common.h

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

Tom Rini

tags (0)

participants (1)