RE: [U-Boot-Users] IXP425 processor
-----Original Message----- From: u-boot-users-admin@lists.sourceforge.net [mailto:u-boot-users-admin@lists.sourceforge.net] On Behalf Of Frank Sent: woensdag 25 januari 2006 3:23 To: u-boot-users@lists.sourceforge.net Subject: [U-Boot-Users] IXP425 processor
Does the EDK4.0 cross toolchain support the IXP425 Xscale processor?
Yes, use the arm toolchain
Regards, martijn
On Wednesday 25 January 2006 16:27, Martijn de Gouw wrote:
Does the EDK4.0 cross toolchain support the IXP425 Xscale processor?
Yes, use the arm toolchain
I am afraid, but ELDK 4.0 doesn't have an arm toolchain right now. Might come in a future release. But the ELDK 3.1.1 has an arm toolchain which can be used for ARM U-Boot ports.
Best regards, Stefan
--- Stefan Roese sr@denx.de wrote:
On Wednesday 25 January 2006 16:27, Martijn de Gouw wrote:
Does the EDK4.0 cross toolchain support the IXP425 Xscale processor?
Yes, use the arm toolchain
I am afraid, but ELDK 4.0 doesn't have an arm toolchain right now. Might come in a future release. But the ELDK 3.1.1 has an arm toolchain which can be used for ARM U-Boot ports.
Best regards, Stefan
Thanks, I'm assuming there won't be problem using the 3.1.1 ELDK with the 2.6 kernel, correct?
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Hi Frank,
On Wednesday 25 January 2006 16:51, Frank wrote:
I'm assuming there won't be problem using the 3.1.1 ELDK with the 2.6 kernel, correct?
Sorry but ELDK 3.1.1 uses gcc 3.3.3 which seems to be a too old for the recent 2.6.15er kernels.
But as Martin mentioned, a arm version of the ELDK 4.0 toolchain is available. Please give it a try.
Best regards, Stefan
In message 20060125155138.81546.qmail@web32207.mail.mud.yahoo.com you wrote:
I'm assuming there won't be problem using the 3.1.1 ELDK with the 2.6 kernel, correct?
I didn't try for ARM, but there may be trouble ahead - for example, it definitely does not work any more for PowerPC (binutils too old).
Best regards,
Wolfgang Denk
--- Wolfgang Denk wd@denx.de wrote:
In message 20060125155138.81546.qmail@web32207.mail.mud.yahoo.com you wrote:
I'm assuming there won't be problem using the 3.1.1 ELDK
with
the 2.6 kernel, correct?
I didn't try for ARM, but there may be trouble ahead - for example, it definitely does not work any more for PowerPC (binutils too old).
Best regards,
Wolfgang Denk
Actually, I'm using 4.0 for powerPc so that is not a probelm. I have a project coming up which will require me to cross tools for IXP425. I'll see if they (4.0 on ARM) work for the 2.6 kernel when the board comes in...
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
In message 20060125214917.32317.qmail@web32212.mail.mud.yahoo.com you wrote:
for IXP425. I'll see if they (4.0 on ARM) work for the 2.6 kernel when the board comes in...
They should work fine. That's what we've tested.
Best regards,
Wolfgang Denk
--- Wolfgang Denk wd@denx.de wrote:
In message 20060125214917.32317.qmail@web32212.mail.mud.yahoo.com you wrote:
for IXP425. I'll see if they (4.0 on ARM) work for the 2.6 kernel when the board comes in...
They should work fine. That's what we've tested.
Best regards,
Wolfgang Denk
Great...
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
In message 200601251638.48085.sr@denx.de you wrote:
I am afraid, but ELDK 4.0 doesn't have an arm toolchain right now. Might come
Stefan, you should know better ;-)
Best regards,
Wolfgang Denk
participants (4)
-
Frank -
Martijn de Gouw -
Stefan Roese -
Wolfgang Denk