Hi Prafulla,

Any news of this patch ?

Regards, Gérald

Le 23/12/2014 14:04, drEagle a écrit :

Hi Prafulla,

Is it okay also for this patch which is a GuruPlug refresh for same config as the SheevaPlug one.

Regards, Gérald

Le 19/12/2014 08:20, Gerald Kerma a écrit :

...

Refresh for newer kernel. Prepare ENV settings for guruplugs to be OpenWRT ready.

+----------+
| UBOOT    | >> 896 Kb (7x128)  = uboot
+----------+
| ENV      | >> 128 Kb          = uboot_env
+----------+
| ROOT(FS) | >> 511 Mb @ 1 Mb   = root -> rootfs (ubifs)
+----------+

With (CC) TRUNK OpenWRT build (QUICK HOWTO) :

<INTERRUPT>
Marvell>> nand erase.part root
Marvell>> ubi part root
Marvell>> ubi remove rootfs
Marvell>> ubi create rootfs
Marvell>> usb start
Marvell>> fatload usb 2:1 0x800000 guruplug/openwrt/openwrt-kirkwood-guruplugserverplus-rootfs.ubifs
Marvell>> ubi write 0x800000 rootfs ${filesize}
Marvell>> reset

Changes in v2:

• Fix commit comments

Changes in v1:

• ADD generic board define
• ADD FDT support
• ADD HUSH interpreter
• Define new NAND partition mapping

Signed-off-by: Gerald Kerma dreagle@doukki.net

include/configs/guruplug.h | 84 ++++++++++++++++++++++++++++++++++++---------- 1 file changed, 67 insertions(+), 17 deletions(-)

diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index a56a4cb..8e53af8 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -1,5 +1,6 @@ /*

• • (C) Copyright 2009

• • (C) Copyright 2009-2014
• • Gerald Kerma dreagle@doukki.net
  • Marvell Semiconductor <www.marvell.com>
  • Written-by: Siddarth Gore gores@marvell.com

@@ -9,6 +10,8 @@ #ifndef _CONFIG_GURUPLUG_H #define _CONFIG_GURUPLUG_H

+#define CONFIG_SYS_GENERIC_BOARD

/*

• Version number information

*/ @@ -23,17 +26,36 @@ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */

/*

• • Compression configuration
• */

+#define CONFIG_BZIP2 +#define CONFIG_LZMA +#define CONFIG_LZO

+/*

• • Enable device tree support
• */

+#define CONFIG_OF_LIBFDT

+/*

• • Miscellaneous configurable options
• */

+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */

+/*

• Commands configuration

*/ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_PING #define CONFIG_CMD_USB -#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT

/*

• mv-common.h should be defined after CMD configs since it used them

@@ -55,24 +77,38 @@

• it has to be rounded to sector size

*/ #define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0x60000 -#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ +#define CONFIG_ENV_OFFSET 0xE0000 /* env starts here */

/*

• Default environment variables

*/ -#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \

• "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
• "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
• "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
• "bootm 0x6400000;"

-#define CONFIG_EXTRA_ENV_SETTINGS \

• "x_bootcmd_ethernet=ping 192.168.2.1\0" \
• "x_bootcmd_usb=usb start\0" \
• "x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \
• "x_bootargs=console=ttyS0,115200\0" \
• "x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"

+#define CONFIG_BOOTCOMMAND \

• "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
• "ubi part root; " \
• "ubifsmount ubi:rootfs; " \
• "ubifsload 0x800000 ${kernel}; " \
• "ubifsload 0x700000 ${fdt}; " \
• "ubifsumount; " \
• "fdt addr 0x700000; fdt resize; fdt chosen; " \
• "bootz 0x800000 - 0x700000"

+#define CONFIG_MTDPARTS \

• "mtdparts=orion_nand:" \
• "896K(uboot),128K(uboot_env)," \
• "-@1M(root)\0"

+#define CONFIG_EXTRA_ENV_SETTINGS \

• "console=console=ttyS0,115200\0" \
• "mtdids=nand0=orion_nand\0" \
• "mtdparts="CONFIG_MTDPARTS \
• "kernel=/boot/zImage\0" \
• "fdt=/boot/guruplug-server-plus.dtb\0" \
• "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"

+#define MTDIDS_DEFAULT "nand0=orion_nand"

+#define MTDPARTS_DEFAULT \

• "mtdparts="CONFIG_MTDPARTS

/*

• Ethernet Driver configuration

@@ -89,6 +125,20 @@ #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET #endif /*CONFIG_MVSATA_IDE*/

+/*

• • File system
• */

+#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS

#define CONFIG_SYS_ALT_MEMTEST

#endif /* _CONFIG_GURUPLUG_H */

---

U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot