[U-Boot-Users] [PATCH]: Fix partition initialization for SystemACE
This patch seems to have gotten lost in the frey. It properly initializes the partition table structure for SystemACE devices. Without it, partition commands to not work properly.
CHANGELOG
* Patch by Stephen Williams, 28 April 2005 Properly intialize the device partition structure for SystemACE disks.
Stephen,
It appears that my patch that fixed this is missing also.
I also had to make changes to work around the problem whereby the MPU interface on the SystemACE gets stuck unless you put in the configuration controller in reset. Here is a small patch that fixes that problem.
If you get a chance, let me know how it works for you.
Jeff
On Thu, 2005-04-28 at 16:08 -0700, Stephen Williams wrote:
This patch seems to have gotten lost in the frey. It properly initializes the partition table structure for SystemACE devices. Without it, partition commands to not work properly.
CHANGELOG
- Patch by Stephen Williams, 28 April 2005 Properly intialize the device partition structure for SystemACE disks.
In message 1114776717.7324.24.camel@nighteyes.localdomain you wrote:
It appears that my patch that fixed this is missing also.
I also had to make changes to work around the problem whereby the MPU interface on the SystemACE gets stuck unless you put in the configuration controller in reset. Here is a small patch that fixes that problem.
If you get a chance, let me know how it works for you.
This patch fails to apply; please resubmit against current code base.
Best regards,
Wolfgang Denk
In message 42716CF4.6040903@icarus.com you wrote:
CHANGELOG
- Patch by Stephen Williams, 28 April 2005 Properly intialize the device partition structure for SystemACE disks.
Added (as far as still applicable).
Thanks.
Best regards,
Wolfgang Denk
participants (3)
-
Jeff Angielski -
Stephen Williams -
Wolfgang Denk