The device tree split into .dtsi and .dts files, common device node for eMMC/SD, enable I2C1, UART1 for console instead of UART0, enable the DDR 2GB memory and in that 288MB memory is reserved for fabric buffer.

Signed-off-by: Padmarao Begari padmarao.begari@microchip.com --- arch/riscv/dts/microchip-mpfs-icicle-kit.dts | 518 ++++------------ arch/riscv/dts/microchip-mpfs.dtsi | 571 ++++++++++++++++++ .../microchip-mpfs-plic.h | 195 ++++++ .../interrupt-controller/riscv-hart.h | 18 + 4 files changed, 913 insertions(+), 389 deletions(-) create mode 100644 arch/riscv/dts/microchip-mpfs.dtsi create mode 100644 include/dt-bindings/interrupt-controller/microchip-mpfs-plic.h create mode 100644 include/dt-bindings/interrupt-controller/riscv-hart.h

diff --git a/arch/riscv/dts/microchip-mpfs-icicle-kit.dts b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts index 89c4cf5fb2..287ef3d23b 100644 --- a/arch/riscv/dts/microchip-mpfs-icicle-kit.dts +++ b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts @@ -1,417 +1,157 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020 Microchip Technology Inc */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 Microchip Technology Inc. + * Padmarao Begari padmarao.begari@microchip.com + */

/dts-v1/; -#include "dt-bindings/clock/microchip-mpfs-clock.h" + +#include "microchip-mpfs.dtsi"

/* Clock frequency (in Hz) of the rtcclk */ #define RTCCLK_FREQ 1000000

/ { - #address-cells = <2>; - #size-cells = <2>; - model = "Microchip MPFS Icicle Kit"; - compatible = "microchip,mpfs-icicle-kit"; + model = "Microchip PolarFire-SoC Icicle Kit"; + compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs";

aliases { - serial0 = &uart0; - ethernet0 = &emac1; + serial1 = &uart1; + ethernet0 = &mac1; };

chosen { - stdout-path = "serial0"; + stdout-path = "serial1"; };

- cpucomplex: cpus { - #address-cells = <1>; - #size-cells = <0>; + cpus { timebase-frequency = <RTCCLK_FREQ>; - cpu0: cpu@0 { - clocks = <&clkcfg CLK_CPU>; - compatible = "sifive,e51", "sifive,rocket0", "riscv"; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <128>; - i-cache-size = <16384>; - reg = <0>; - riscv,isa = "rv64imac"; - status = "disabled"; - operating-points = < - /* kHz uV */ - 600000 1100000 - 300000 950000 - 150000 750000 - >; - cpu0intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - cpu1: cpu@1 { - clocks = <&clkcfg CLK_CPU>; - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <1>; - riscv,isa = "rv64imafdc"; - tlb-split; - status = "okay"; - operating-points = < - /* kHz uV */ - 600000 1100000 - 300000 950000 - 150000 750000 - >; - cpu1intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - cpu2: cpu@2 { - clocks = <&clkcfg CLK_CPU>; - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <2>; - riscv,isa = "rv64imafdc"; - tlb-split; - status = "okay"; - operating-points = < - /* kHz uV */ - 600000 1100000 - 300000 950000 - 150000 750000 - >; - cpu2intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; + }; + + reserved-memory { + ranges; + #size-cells = <2>; + #address-cells = <2>; + + fabricbuf0: fabricbuf@0 { + compatible = "shared-dma-pool"; + reg = <0x0 0xae000000 0x0 0x2000000>; + label = "fabricbuf0-ddr-c"; }; - cpu3: cpu@3 { - clocks = <&clkcfg CLK_CPU>; - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <3>; - riscv,isa = "rv64imafdc"; - tlb-split; - status = "okay"; - operating-points = < - /* kHz uV */ - 600000 1100000 - 300000 950000 - 150000 750000 - >; - cpu3intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; + + fabricbuf1: fabricbuf@1 { + compatible = "shared-dma-pool"; + reg = <0x0 0xc0000000 0x0 0x8000000>; + label = "fabricbuf1-ddr-nc"; }; - cpu4: cpu@4 { - clocks = <&clkcfg CLK_CPU>; - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <4>; - riscv,isa = "rv64imafdc"; - tlb-split; - status = "okay"; - operating-points = < - /* kHz uV */ - 600000 1100000 - 300000 950000 - 150000 750000 - >; - cpu4intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; + + fabricbuf2: fabricbuf@2 { + compatible = "shared-dma-pool"; + reg = <0x0 0xd8000000 0x0 0x8000000>; + label = "fabricbuf2-ddr-nc-wcb"; }; }; - refclk: refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <600000000>; - clock-output-names = "msspllclk"; + + udmabuf0 { + compatible = "ikwzm,u-dma-buf"; + device-name = "udmabuf-ddr-c0"; + minor-number = <0>; + size = <0x0 0x2000000>; + memory-region = <&fabricbuf0>; + sync-mode = <3>; + }; + + udmabuf1 { + compatible = "ikwzm,u-dma-buf"; + device-name = "udmabuf-ddr-nc0"; + minor-number = <1>; + size = <0x0 0x8000000>; + memory-region = <&fabricbuf1>; + sync-mode = <3>; + }; + + udmabuf2 { + compatible = "ikwzm,u-dma-buf"; + device-name = "udmabuf-ddr-nc-wcb0"; + minor-number = <2>; + size = <0x0 0x8000000>; + memory-region = <&fabricbuf2>; + sync-mode = <3>; }; - ddr: memory@80000000 { + + ddrc_cache_lo: memory@80000000 { device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x40000000>; + reg = <0x0 0x80000000 0x0 0x2e000000>; clocks = <&clkcfg CLK_DDRC>; + status = "okay"; }; - soc: soc { - #address-cells = <2>; - #size-cells = <2>; - compatible = "microchip,mpfs-icicle-kit", "simple-bus"; - ranges; - clint0: clint@2000000 { - compatible = "riscv,clint0"; - interrupts-extended = <&cpu0intc 3 &cpu0intc 7 - &cpu1intc 3 &cpu1intc 7 - &cpu2intc 3 &cpu2intc 7 - &cpu3intc 3 &cpu3intc 7 - &cpu4intc 3 &cpu4intc 7>; - reg = <0x0 0x2000000 0x0 0x10000>; - reg-names = "control"; - clock-frequency = <RTCCLK_FREQ>; - }; - cachecontroller: cache-controller@2010000 { - compatible = "sifive,fu540-c000-ccache", "cache"; - cache-block-size = <64>; - cache-level = <2>; - cache-sets = <1024>; - cache-size = <2097152>; - cache-unified; - interrupt-parent = <&plic>; - interrupts = <1 2 3>; - reg = <0x0 0x2010000 0x0 0x1000>; - }; - plic: interrupt-controller@c000000 { - #interrupt-cells = <1>; - compatible = "sifive,plic-1.0.0"; - reg = <0x0 0xc000000 0x0 0x4000000>; - riscv,max-priority = <7>; - riscv,ndev = <186>; - interrupt-controller; - interrupts-extended = < - &cpu0intc 11 - &cpu1intc 11 &cpu1intc 9 - &cpu2intc 11 &cpu2intc 9 - &cpu3intc 11 &cpu3intc 9 - &cpu4intc 11 &cpu4intc 9>; - }; - uart0: serial@20000000 { - compatible = "ns16550a"; - reg = <0x0 0x20000000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <90>; - clocks = <&clkcfg CLK_MMUART0>; - status = "okay"; - }; - clkcfg: clkcfg@20002000 { - compatible = "microchip,mpfs-clkcfg"; - reg = <0x0 0x20002000 0x0 0x1000>; - reg-names = "mss_sysreg"; - clocks = <&refclk>; - #clock-cells = <1>; - clock-output-names = "cpu", "axi", "ahb", "envm", - "mac0", "mac1", "mmc", "timer", - "mmuart0", "mmuart1", "mmuart2", - "mmuart3", "mmuart4", "spi0", "spi1", - "i2c0", "i2c1", "can0", "can1", "usb", - "reserved", "rtc", "qspi", "gpio0", - "gpio1", "gpio2", "ddrc", "fic0", - "fic1", "fic2", "fic3", "athena", - "cfm"; - }; - emmc: mmc@20008000 { - compatible = "cdns,sd4hc"; - reg = <0x0 0x20008000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <88 89>; - pinctrl-names = "default"; - clocks = <&clkcfg CLK_MMC>; - bus-width = <4>; - cap-mmc-highspeed; - mmc-ddr-3_3v; - max-frequency = <200000000>; - non-removable; - no-sd; - no-sdio; - voltage-ranges = <3300 3300>; - status = "okay"; - }; - sdcard: sd@20008000 { - compatible = "cdns,sd4hc"; - reg = <0x0 0x20008000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <88>; - pinctrl-names = "default"; - clocks = <&clkcfg CLK_MMC>; - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - card-detect-delay = <200>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - max-frequency = <200000000>; - status = "disabled"; - }; - uart1: serial@20100000 { - compatible = "ns16550a"; - reg = <0x0 0x20100000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <91>; - clocks = <&clkcfg CLK_MMUART1>; - status = "okay"; - }; - uart2: serial@20102000 { - compatible = "ns16550a"; - reg = <0x0 0x20102000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <92>; - clocks = <&clkcfg CLK_MMUART2>; - status = "okay"; - }; - uart3: serial@20104000 { - compatible = "ns16550a"; - reg = <0x0 0x20104000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <93>; - clocks = <&clkcfg CLK_MMUART3>; - status = "okay"; - }; - i2c0: i2c@2010a000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "microchip,mpfs-mss-i2c"; - reg = <0x0 0x2010a000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <58>; - clocks = <&clkcfg CLK_I2C0>; - status = "disabled"; - }; - i2c1: i2c@2010b000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "microchip,mpfs-mss-i2c"; - reg = <0x0 0x2010b000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <61>; - clocks = <&clkcfg CLK_I2C1>; - status = "disabled"; - pac193x@10 { - compatible = "microchip,pac1934"; - reg = <0x10>; - samp-rate = <64>; - status = "disabled"; - ch1: channel0 { - uohms-shunt-res = <10000>; - rail-name = "VDD"; - channel_enabled; - }; - ch2: channel1 { - uohms-shunt-res = <10000>; - rail-name = "VDDA25"; - channel_enabled; - }; - ch3: channel2 { - uohms-shunt-res = <10000>; - rail-name = "VDD25"; - channel_enabled; - }; - ch4: channel3 { - uohms-shunt-res = <10000>; - rail-name = "VDDA"; - channel_enabled; - }; - }; - }; - emac0: ethernet@20110000 { - compatible = "microchip,mpfs-mss-gem"; - reg = <0x0 0x20110000 0x0 0x2000>; - interrupt-parent = <&plic>; - interrupts = <64 65 66 67>; - local-mac-address = [56 34 00 FC 00 02]; - phy-mode = "sgmii"; - clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AXI>; - clock-names = "pclk", "hclk"; - status = "disabled";

- #address-cells = <1>; - #size-cells = <0>; - phy-handle = <&phy0>; - phy0: ethernet-phy@8 { - reg = <8>; - ti,fifo-depth = <0x01>; - }; - }; - emac1: ethernet@20112000 { - compatible = "microchip,mpfs-mss-gem"; - reg = <0x0 0x20112000 0x0 0x2000>; - interrupt-parent = <&plic>; - interrupts = <70 71 72 73>; - local-mac-address = [00 00 00 00 00 00]; - phy-mode = "sgmii"; - clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; - clock-names = "pclk", "hclk"; - status = "okay"; + ddrc_cache_hi: memory@1000000000 { + device_type = "memory"; + reg = <0x10 0x0 0x0 0x40000000>; + clocks = <&clkcfg CLK_DDRC>; + status = "okay"; + }; +};

- #address-cells = <1>; - #size-cells = <0>; - phy-handle = <&phy1>; - phy1: ethernet-phy@9 { - reg = <9>; - ti,fifo-depth = <0x01>; - }; - }; - gpio: gpio@20122000 { - compatible = "microchip,mpfs-mss-gpio"; - interrupt-parent = <&plic>; - interrupts = <13 14 15 16 17 18 19 20 21 22 23 24 25 26 - 27 28 29 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44>; - gpio-controller; - clocks = <&clkcfg CLK_GPIO2>; - reg = <0x00 0x20122000 0x0 0x1000>; - reg-names = "control"; - #gpio-cells = <2>; - status = "disabled"; +&uart1 { + status = "okay"; +}; + +&mmc { + status = "okay"; + + bus-width = <4>; + disable-wp; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + + pac193x: pac193x@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + samp-rate = <64>; + status = "okay"; + ch1: channel0 { + uohms-shunt-res = <10000>; + rail-name = "VDDREG"; + channel_enabled; + }; + ch2: channel1 { + uohms-shunt-res = <10000>; + rail-name = "VDDA25"; + channel_enabled; + }; + ch3: channel2 { + uohms-shunt-res = <10000>; + rail-name = "VDD25"; + channel_enabled; + }; + ch4: channel3 { + uohms-shunt-res = <10000>; + rail-name = "VDDA_REG"; + channel_enabled; }; }; }; + +&mac1 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy1>; + phy1: ethernet-phy@9 { + reg = <9>; + ti,fifo-depth = <0x1>; + }; +}; diff --git a/arch/riscv/dts/microchip-mpfs.dtsi b/arch/riscv/dts/microchip-mpfs.dtsi new file mode 100644 index 0000000000..0204bea767 --- /dev/null +++ b/arch/riscv/dts/microchip-mpfs.dtsi @@ -0,0 +1,571 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +#include "dt-bindings/clock/microchip-mpfs-clock.h" +#include "dt-bindings/interrupt-controller/microchip-mpfs-plic.h" +#include "dt-bindings/interrupt-controller/riscv-hart.h" + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Microchip PolarFire SoC"; + compatible = "microchip,mpfs"; + + chosen { + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "sifive,e51", "sifive,rocket0", "riscv"; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <16384>; + reg = <0>; + riscv,isa = "rv64imac"; + clocks = <&clkcfg CLK_CPU>; + status = "disabled"; + operating-points = < + /* kHz uV */ + 600000 1100000 + 300000 950000 + 150000 750000 + >; + cpu0_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu1: cpu@1 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <1>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + status = "okay"; + operating-points = < + /* kHz uV */ + 600000 1100000 + 300000 950000 + 150000 750000 + >; + cpu1_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu2: cpu@2 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <2>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + status = "okay"; + operating-points = < + /* kHz uV */ + 600000 1100000 + 300000 950000 + 150000 750000 + >; + cpu2_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu3: cpu@3 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <3>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + status = "okay"; + operating-points = < + /* kHz uV */ + 600000 1100000 + 300000 950000 + 150000 750000 + >; + cpu3_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu4: cpu@4 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <4>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + status = "okay"; + operating-points = < + /* kHz uV */ + 600000 1100000 + 300000 950000 + 150000 750000 + >; + cpu4_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "microchip,mpfs-soc", "simple-bus"; + ranges; + + clint: clint@2000000 { + compatible = "sifive,clint0"; + reg = <0x0 0x2000000 0x0 0xC000>; + interrupts-extended = + <&cpu0_intc HART_INT_M_SOFT &cpu0_intc HART_INT_M_TIMER + &cpu1_intc HART_INT_M_SOFT &cpu1_intc HART_INT_M_TIMER + &cpu2_intc HART_INT_M_SOFT &cpu2_intc HART_INT_M_TIMER + &cpu3_intc HART_INT_M_SOFT &cpu3_intc HART_INT_M_TIMER + &cpu4_intc HART_INT_M_SOFT &cpu4_intc HART_INT_M_TIMER>; + }; + + cachecontroller: cache-controller@2010000 { + compatible = "sifive,fu540-c000-ccache", "cache"; + reg = <0x0 0x2010000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_L2_METADATA_CORR + PLIC_INT_L2_METADATA_UNCORR + PLIC_INT_L2_DATA_CORR>; + cache-block-size = <64>; + cache-level = <2>; + cache-sets = <1024>; + cache-size = <2097152>; + cache-unified; + }; + + pdma: pdma@3000000 { + compatible = "microchip,mpfs-pdma-uio","sifive,fu540-c000-pdma"; + reg = <0x0 0x3000000 0x0 0x8000>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_DMA_CH0_DONE PLIC_INT_DMA_CH0_ERR + PLIC_INT_DMA_CH1_DONE PLIC_INT_DMA_CH1_ERR + PLIC_INT_DMA_CH2_DONE PLIC_INT_DMA_CH2_ERR + PLIC_INT_DMA_CH3_DONE PLIC_INT_DMA_CH3_ERR>; + #dma-cells = <1>; + }; + + plic: interrupt-controller@c000000 { + compatible = "sifive,plic-1.0.0"; + reg = <0x0 0xc000000 0x0 0x4000000>; + #interrupt-cells = <1>; + riscv,ndev = <186>; + interrupt-controller; + interrupts-extended = <&cpu0_intc HART_INT_M_EXT + &cpu1_intc HART_INT_M_EXT &cpu1_intc HART_INT_S_EXT + &cpu2_intc HART_INT_M_EXT &cpu2_intc HART_INT_S_EXT + &cpu3_intc HART_INT_M_EXT &cpu3_intc HART_INT_S_EXT + &cpu4_intc HART_INT_M_EXT &cpu4_intc HART_INT_S_EXT>; + }; + + refclk: refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <600000000>; + clock-output-names = "msspllclk"; + }; + + clkcfg: clkcfg@20002000 { + compatible = "microchip,mpfs-clkcfg"; + reg = <0x0 0x20002000 0x0 0x1000>; + reg-names = "mss_sysreg"; + clocks = <&refclk>; + #clock-cells = <1>; + clock-output-names = "cpu", "axi", "ahb", "envm", /* 0-3 */ + "mac0", "mac1", "mmc", "timer", /* 4-7 */ + "mmuart0", "mmuart1", "mmuart2", "mmuart3", /* 8-11 */ + "mmuart4", "spi0", "spi1", "i2c0", /* 12-15 */ + "i2c1", "can0", "can1", "usb", /* 16-19 */ + "rsvd", "rtc", "qspi", "gpio0", /* 20-23 */ + "gpio1", "gpio2", "ddrc", "fic0", /* 24-27 */ + "fic1", "fic2", "fic3", "athena", "cfm"; /* 28-32 */ + }; + + /* Common node entry for eMMC/SD */ + mmc: mmc@20008000 { + compatible = "microchip,mpfs-sd4hc","cdns,sd4hc"; + reg = <0x0 0x20008000 0x0 0x1000>; + clocks = <&clkcfg CLK_MMC>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_MMC_MAIN PLIC_INT_MMC_WAKEUP>; + max-frequency = <200000000>; + status = "disabled"; + }; + + uart0: serial@20000000 { + compatible = "ns16550a"; + reg = <0x0 0x20000000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_MMUART0>; + clocks = <&clkcfg CLK_MMUART0>; + status = "disabled"; /* Reserved for the HSS */ + }; + + uart1: serial@20100000 { + compatible = "ns16550a"; + reg = <0x0 0x20100000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_MMUART1>; + clocks = <&clkcfg CLK_MMUART1>; + status = "disabled"; + }; + + uart2: serial@20102000 { + compatible = "ns16550a"; + reg = <0x0 0x20102000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_MMUART2>; + clocks = <&clkcfg CLK_MMUART2>; + status = "disabled"; + }; + + uart3: serial@20104000 { + compatible = "ns16550a"; + reg = <0x0 0x20104000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_MMUART3>; + clocks = <&clkcfg CLK_MMUART3>; + status = "disabled"; + }; + + uart4: serial@20106000 { + compatible = "ns16550a"; + reg = <0x0 0x20106000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_MMUART4>; + clocks = <&clkcfg CLK_MMUART4>; + status = "disabled"; + }; + + spi0: spi@20108000 { + compatible = "microchip,mpfs-spi"; + reg = <0x0 0x20108000 0x0 0x1000>; + clocks = <&clkcfg CLK_SPI0>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_SPI0>; + num-cs = <8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@20109000 { + compatible = "microchip,mpfs-spi"; + reg = <0x0 0x20109000 0x0 0x1000>; + clocks = <&clkcfg CLK_SPI1>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_SPI1>; + num-cs = <8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@2010a000 { + compatible = "microchip,mpfs-i2c"; + reg = <0x0 0x2010a000 0x0 0x1000>; + clocks = <&clkcfg CLK_I2C0>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_I2C0_MAIN>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@2010b000 { + compatible = "microchip,mpfs-i2c"; + reg = <0x0 0x2010b000 0x0 0x1000>; + clocks = <&clkcfg CLK_I2C1>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_I2C1_MAIN>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + can0: can@2010c000 { + compatible = "microchip,mpfs-can-uio"; + reg = <0x0 0x2010c000 0x0 0x1000>; + clocks = <&clkcfg CLK_CAN0>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_CAN0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + can1: can@2010d000 { + compatible = "microchip,mpfs-can-uio"; + reg = <0x0 0x2010d000 0x0 0x1000>; + clocks = <&clkcfg CLK_CAN1>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_CAN1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mac0: ethernet@20110000 { + compatible = "microchip,mpfs-gem"; + reg = <0x0 0x20110000 0x0 0x2000>; + clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_MAC0_INT + PLIC_INT_MAC0_QUEUE1 + PLIC_INT_MAC0_QUEUE2 + PLIC_INT_MAC0_QUEUE3 + PLIC_INT_MAC0_EMAC + PLIC_INT_MAC0_MMSL>; + local-mac-address = [00 00 00 00 00 00]; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mac1: ethernet@20112000 { + compatible = "microchip,mpfs-gem"; + reg = <0x0 0x20112000 0x0 0x2000>; + clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_MAC1_INT + PLIC_INT_MAC1_QUEUE1 + PLIC_INT_MAC1_QUEUE2 + PLIC_INT_MAC1_QUEUE3 + PLIC_INT_MAC1_EMAC + PLIC_INT_MAC1_MMSL>; + local-mac-address = [00 00 00 00 00 00]; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gpio0: gpio@20120000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20120000 0x0 0x1000>; + reg-names = "control"; + clocks = <&clkcfg CLK_GPIO0>; + interrupt-parent = <&plic>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + gpio1: gpio@20121000 { + compatible = "microchip,mpfs-gpio"; + reg = <000 0x20121000 0x0 0x1000>; + reg-names = "control"; + clocks = <&clkcfg CLK_GPIO1>; + interrupt-parent = <&plic>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + gpio2: gpio@20122000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20122000 0x0 0x1000>; + reg-names = "control"; + clocks = <&clkcfg CLK_GPIO2>; + interrupt-parent = <&plic>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + rtc: rtc@20124000 { + compatible = "microchip,mpfs-rtc"; + reg = <0x0 0x20124000 0x0 0x1000>; + clocks = <&clkcfg CLK_RTC>; + clock-names = "rtc"; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_RTC_WAKEUP PLIC_INT_RTC_MATCH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@20201000 { + compatible = "microchip,mpfs-usb-host"; + reg = <0x0 0x20201000 0x0 0x1000>; + reg-names = "mc","control"; + clocks = <&clkcfg CLK_USB>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_USB_DMA PLIC_INT_USB_MC>; + interrupt-names = "dma","mc"; + dr_mode = "host"; + status = "disabled"; + }; + + qspi: qspi@21000000 { + compatible = "microchip,mpfs-qspi"; + reg = <0x0 0x21000000 0x0 0x1000>; + clocks = <&clkcfg CLK_QSPI>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_QSPI>; + num-cs = <8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mbox: mailbox@37020000 { + compatible = "microchip,mpfs-mailbox"; + reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_G5C_MESSAGE>; + #mbox-cells = <1>; + status = "disabled"; + }; + + pcie: pcie@2000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x20 0x0 0x0 0x8000000 0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + clocks = <&clkcfg CLK_FIC0>, <&clkcfg CLK_FIC1>, <&clkcfg CLK_FIC3>; + clock-names = "fic0", "fic1", "fic3"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <PLIC_INT_FABRIC_F2H_2>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + msi-parent = <&pcie>; + msi-controller; + mchp,axi-m-atr0 = <0x10 0x0>; + status = "disabled"; + pcie_intc: legacy-interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + syscontroller: syscontroller { + compatible = "microchip,mpfs-sys-controller"; + #address-cells = <1>; + #size-cells = <1>; + mboxes = <&mbox 0>; + }; + + hwrandom: hwrandom { + compatible = "microchip,mpfs-rng"; + #address-cells = <1>; + #size-cells = <1>; + syscontroller = <&syscontroller>; + }; + + serialnum: serialnum { + compatible = "microchip,mpfs-serial-number"; + #address-cells = <1>; + #size-cells = <1>; + syscontroller = <&syscontroller>; + }; + + fpgadigest: fpgadigest { + compatible = "microchip,mpfs-digest"; + #address-cells = <1>; + #size-cells = <1>; + syscontroller = <&syscontroller>; + }; + + devicecert: cert { + compatible = "microchip,mpfs-device-cert"; + #address-cells = <1>; + #size-cells = <1>; + syscontroller = <&syscontroller>; + }; + + signature: signature { + compatible = "microchip,mpfs-signature"; + #address-cells = <1>; + #size-cells = <1>; + syscontroller = <&syscontroller>; + }; + }; +}; diff --git a/include/dt-bindings/interrupt-controller/microchip-mpfs-plic.h b/include/dt-bindings/interrupt-controller/microchip-mpfs-plic.h new file mode 100644 index 0000000000..a379cb651e --- /dev/null +++ b/include/dt-bindings/interrupt-controller/microchip-mpfs-plic.h @@ -0,0 +1,195 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H +#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H + +#define PLIC_INT_INVALID 0 +#define PLIC_INT_L2_METADATA_CORR 1 +#define PLIC_INT_L2_METADATA_UNCORR 2 +#define PLIC_INT_L2_DATA_CORR 3 +#define PLIC_INT_L2_DATA_UNCORR 4 +#define PLIC_INT_DMA_CH0_DONE 5 +#define PLIC_INT_DMA_CH0_ERR 6 +#define PLIC_INT_DMA_CH1_DONE 7 +#define PLIC_INT_DMA_CH1_ERR 8 +#define PLIC_INT_DMA_CH2_DONE 9 +#define PLIC_INT_DMA_CH2_ERR 10 +#define PLIC_INT_DMA_CH3_DONE 11 +#define PLIC_INT_DMA_CH3_ERR 12 + +#define PLIC_INT_GPIO0_BIT0_OR_GPIO2_BIT0 13 +#define PLIC_INT_GPIO0_BIT1_OR_GPIO2_BIT1 14 +#define PLIC_INT_GPIO0_BIT2_OR_GPIO2_BIT2 15 +#define PLIC_INT_GPIO0_BIT3_OR_GPIO2_BIT3 16 +#define PLIC_INT_GPIO0_BIT4_OR_GPIO2_BIT4 17 +#define PLIC_INT_GPIO0_BIT5_OR_GPIO2_BIT5 18 +#define PLIC_INT_GPIO0_BIT6_OR_GPIO2_BIT6 19 +#define PLIC_INT_GPIO0_BIT7_OR_GPIO2_BIT7 20 +#define PLIC_INT_GPIO0_BIT8_OR_GPIO2_BIT8 21 +#define PLIC_INT_GPIO0_BIT9_OR_GPIO2_BIT9 22 +#define PLIC_INT_GPIO0_BIT10_OR_GPIO2_BIT10 23 +#define PLIC_INT_GPIO0_BIT11_OR_GPIO2_BIT11 24 +#define PLIC_INT_GPIO0_BIT12_OR_GPIO2_BIT12 25 +#define PLIC_INT_GPIO0_BIT13_OR_GPIO2_BIT13 26 +#define PLIC_INT_GPIO1_BIT0_OR_GPIO2_BIT14 27 +#define PLIC_INT_GPIO1_BIT1_OR_GPIO2_BIT15 28 +#define PLIC_INT_GPIO1_BIT2_OR_GPIO2_BIT16 29 +#define PLIC_INT_GPIO1_BIT3_OR_GPIO2_BIT17 30 +#define PLIC_INT_GPIO1_BIT4_OR_GPIO2_BIT18 31 +#define PLIC_INT_GPIO1_BIT5_OR_GPIO2_BIT19 32 +#define PLIC_INT_GPIO1_BIT6_OR_GPIO2_BIT20 33 +#define PLIC_INT_GPIO1_BIT7_OR_GPIO2_BIT21 34 +#define PLIC_INT_GPIO1_BIT8_OR_GPIO2_BIT22 35 +#define PLIC_INT_GPIO1_BIT9_OR_GPIO2_BIT23 36 +#define PLIC_INT_GPIO1_BIT10_OR_GPIO2_BIT24 37 +#define PLIC_INT_GPIO1_BIT11_OR_GPIO2_BIT25 38 +#define PLIC_INT_GPIO1_BIT12_OR_GPIO2_BIT26 39 +#define PLIC_INT_GPIO1_BIT13_OR_GPIO2_BIT27 40 +#define PLIC_INT_GPIO1_BIT14_OR_GPIO2_BIT28 41 +#define PLIC_INT_GPIO1_BIT15_OR_GPIO2_BIT29 42 +#define PLIC_INT_GPIO1_BIT16_OR_GPIO2_BIT30 43 +#define PLIC_INT_GPIO1_BIT17_OR_GPIO2_BIT31 44 +#define PLIC_INT_GPIO1_BIT18 45 +#define PLIC_INT_GPIO1_BIT19 46 +#define PLIC_INT_GPIO1_BIT20 47 +#define PLIC_INT_GPIO1_BIT21 48 +#define PLIC_INT_GPIO1_BIT22 49 +#define PLIC_INT_GPIO1_BIT23 50 +#define PLIC_INT_GPIO0_NON_DIRECT 51 +#define PLIC_INT_GPIO1_NON_DIRECT 52 +#define PLIC_INT_GPIO2_NON_DIRECT 53 +#define PLIC_INT_SPI0 54 +#define PLIC_INT_SPI1 55 +#define PLIC_INT_CAN0 56 +#define PLIC_INT_CAN1 57 +#define PLIC_INT_I2C0_MAIN 58 +#define PLIC_INT_I2C0_ALERT 59 +#define PLIC_INT_I2C0_SUS 60 +#define PLIC_INT_I2C1_MAIN 61 +#define PLIC_INT_I2C1_ALERT 62 +#define PLIC_INT_I2C1_SUS 63 +#define PLIC_INT_MAC0_INT 64 +#define PLIC_INT_MAC0_QUEUE1 65 +#define PLIC_INT_MAC0_QUEUE2 66 +#define PLIC_INT_MAC0_QUEUE3 67 +#define PLIC_INT_MAC0_EMAC 68 +#define PLIC_INT_MAC0_MMSL 69 +#define PLIC_INT_MAC1_INT 70 +#define PLIC_INT_MAC1_QUEUE1 71 +#define PLIC_INT_MAC1_QUEUE2 72 +#define PLIC_INT_MAC1_QUEUE3 73 +#define PLIC_INT_MAC1_EMAC 74 +#define PLIC_INT_MAC1_MMSL 75 +#define PLIC_INT_DDRC_TRAIN 76 +#define PLIC_INT_SCB_INTERRUPT 77 +#define PLIC_INT_ECC_ERROR 78 +#define PLIC_INT_ECC_CORRECT 79 +#define PLIC_INT_RTC_WAKEUP 80 +#define PLIC_INT_RTC_MATCH 81 +#define PLIC_INT_TIMER1 82 +#define PLIC_INT_TIMER2 83 +#define PLIC_INT_ENVM 84 +#define PLIC_INT_QSPI 85 +#define PLIC_INT_USB_DMA 86 +#define PLIC_INT_USB_MC 87 +#define PLIC_INT_MMC_MAIN 88 +#define PLIC_INT_MMC_WAKEUP 89 +#define PLIC_INT_MMUART0 90 +#define PLIC_INT_MMUART1 91 +#define PLIC_INT_MMUART2 92 +#define PLIC_INT_MMUART3 93 +#define PLIC_INT_MMUART4 94 +#define PLIC_INT_G5C_DEVRST 95 +#define PLIC_INT_G5C_MESSAGE 96 +#define PLIC_INT_USOC_VC_INTERRUPT 97 +#define PLIC_INT_USOC_SMB_INTERRUPT 98 +#define PLIC_INT_E51_0_MAINTENACE 99 +#define PLIC_INT_WDOG0_MRVP 100 +#define PLIC_INT_WDOG1_MRVP 101 +#define PLIC_INT_WDOG2_MRVP 102 +#define PLIC_INT_WDOG3_MRVP 103 +#define PLIC_INT_WDOG4_MRVP 104 +#define PLIC_INT_WDOG0_TOUT 105 +#define PLIC_INT_WDOG1_TOUT 106 +#define PLIC_INT_WDOG2_TOUT 107 +#define PLIC_INT_WDOG3_TOUT 108 +#define PLIC_INT_WDOG4_TOUT 109 +#define PLIC_INT_G5C_MSS_SPI 110 +#define PLIC_INT_VOLT_TEMP_ALARM 111 +#define PLIC_INT_ATHENA_COMPLETE 112 +#define PLIC_INT_ATHENA_ALARM 113 +#define PLIC_INT_ATHENA_BUS_ERROR 114 +#define PLIC_INT_USOC_AXIC_US 115 +#define PLIC_INT_USOC_AXIC_DS 116 +#define PLIC_INT_FABRIC_F2H_0 117 +#define PLIC_INT_FABRIC_F2H_1 118 +#define PLIC_INT_FABRIC_F2H_2 119 +#define PLIC_INT_FABRIC_F2H_3 120 +#define PLIC_INT_FABRIC_F2H_4 121 +#define PLIC_INT_FABRIC_F2H_5 122 +#define PLIC_INT_FABRIC_F2H_6 123 +#define PLIC_INT_FABRIC_F2H_7 124 +#define PLIC_INT_FABRIC_F2H_8 125 +#define PLIC_INT_FABRIC_F2H_9 126 +#define PLIC_INT_FABRIC_F2H_10 127 +#define PLIC_INT_FABRIC_F2H_11 128 +#define PLIC_INT_FABRIC_F2H_12 129 +#define PLIC_INT_FABRIC_F2H_13 130 +#define PLIC_INT_FABRIC_F2H_14 131 +#define PLIC_INT_FABRIC_F2H_15 132 +#define PLIC_INT_FABRIC_F2H_16 133 +#define PLIC_INT_FABRIC_F2H_17 134 +#define PLIC_INT_FABRIC_F2H_18 135 +#define PLIC_INT_FABRIC_F2H_19 136 +#define PLIC_INT_FABRIC_F2H_20 137 +#define PLIC_INT_FABRIC_F2H_21 138 +#define PLIC_INT_FABRIC_F2H_22 139 +#define PLIC_INT_FABRIC_F2H_23 140 +#define PLIC_INT_FABRIC_F2H_24 141 +#define PLIC_INT_FABRIC_F2H_25 142 +#define PLIC_INT_FABRIC_F2H_26 143 +#define PLIC_INT_FABRIC_F2H_27 144 +#define PLIC_INT_FABRIC_F2H_28 145 +#define PLIC_INT_FABRIC_F2H_29 146 +#define PLIC_INT_FABRIC_F2H_30 147 +#define PLIC_INT_FABRIC_F2H_31 148 +#define PLIC_INT_FABRIC_F2H_32 149 +#define PLIC_INT_FABRIC_F2H_33 150 +#define PLIC_INT_FABRIC_F2H_34 151 +#define PLIC_INT_FABRIC_F2H_35 152 +#define PLIC_INT_FABRIC_F2H_36 153 +#define PLIC_INT_FABRIC_F2H_37 154 +#define PLIC_INT_FABRIC_F2H_38 155 +#define PLIC_INT_FABRIC_F2H_39 156 +#define PLIC_INT_FABRIC_F2H_40 157 +#define PLIC_INT_FABRIC_F2H_41 158 +#define PLIC_INT_FABRIC_F2H_42 159 +#define PLIC_INT_FABRIC_F2H_43 160 +#define PLIC_INT_FABRIC_F2H_44 161 +#define PLIC_INT_FABRIC_F2H_45 162 +#define PLIC_INT_FABRIC_F2H_46 163 +#define PLIC_INT_FABRIC_F2H_47 164 +#define PLIC_INT_FABRIC_F2H_48 165 +#define PLIC_INT_FABRIC_F2H_49 166 +#define PLIC_INT_FABRIC_F2H_50 167 +#define PLIC_INT_FABRIC_F2H_51 168 +#define PLIC_INT_FABRIC_F2H_52 169 +#define PLIC_INT_FABRIC_F2H_53 170 +#define PLIC_INT_FABRIC_F2H_54 171 +#define PLIC_INT_FABRIC_F2H_55 172 +#define PLIC_INT_FABRIC_F2H_56 173 +#define PLIC_INT_FABRIC_F2H_57 174 +#define PLIC_INT_FABRIC_F2H_58 175 +#define PLIC_INT_FABRIC_F2H_59 176 +#define PLIC_INT_FABRIC_F2H_60 177 +#define PLIC_INT_FABRIC_F2H_61 178 +#define PLIC_INT_FABRIC_F2H_62 179 +#define PLIC_INT_FABRIC_F2H_63 180 +#define PLIC_INT_BUS_ERROR_UNIT_HART_0 181 +#define PLIC_INT_BUS_ERROR_UNIT_HART_1 182 +#define PLIC_INT_BUS_ERROR_UNIT_HART_2 183 +#define PLIC_INT_BUS_ERROR_UNIT_HART_3 184 +#define PLIC_INT_BUS_ERROR_UNIT_HART_4 185 + +#endif /* _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H */ diff --git a/include/dt-bindings/interrupt-controller/riscv-hart.h b/include/dt-bindings/interrupt-controller/riscv-hart.h new file mode 100644 index 0000000000..35f5a96c75 --- /dev/null +++ b/include/dt-bindings/interrupt-controller/riscv-hart.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H +#define _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H + +#define HART_INT_U_SOFT 0 +#define HART_INT_S_SOFT 1 +#define HART_INT_M_SOFT 3 +#define HART_INT_U_TIMER 4 +#define HART_INT_S_TIMER 5 +#define HART_INT_M_TIMER 7 +#define HART_INT_U_EXT 8 +#define HART_INT_S_EXT 9 +#define HART_INT_M_EXT 11 + +#endif /* _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H */ +

This patch updates Microchip MPFS Icicle Kit support. For now, add Microchip I2C driver, set environment variables for mac addesses and default build for SBI_V02.

Signed-off-by: Padmarao Begari padmarao.begari@microchip.com --- board/microchip/mpfs_icicle/Kconfig | 5 +++++ board/microchip/mpfs_icicle/mpfs_icicle.c | 17 ++++++++++++++++- configs/microchip_mpfs_icicle_defconfig | 1 - 3 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/board/microchip/mpfs_icicle/Kconfig b/board/microchip/mpfs_icicle/Kconfig index 4678462378..092e411215 100644 --- a/board/microchip/mpfs_icicle/Kconfig +++ b/board/microchip/mpfs_icicle/Kconfig @@ -45,5 +45,10 @@ config BOARD_SPECIFIC_OPTIONS # dummy imply MMC_WRITE imply MMC_SDHCI imply MMC_SDHCI_CADENCE + imply MMC_SDHCI_ADMA + imply MMC_HS200_SUPPORT + imply CMD_I2C + imply DM_I2C + imply SYS_I2C_MICROCHIP

endif diff --git a/board/microchip/mpfs_icicle/mpfs_icicle.c b/board/microchip/mpfs_icicle/mpfs_icicle.c index afef719dff..e74c9fb03c 100644 --- a/board/microchip/mpfs_icicle/mpfs_icicle.c +++ b/board/microchip/mpfs_icicle/mpfs_icicle.c @@ -119,7 +119,22 @@ int board_late_init(void) if (icicle_mac_addr[idx] == ':') icicle_mac_addr[idx] = ' '; } - env_set("icicle_mac_addr", icicle_mac_addr); + env_set("icicle_mac_addr0", icicle_mac_addr); + + mac_addr[5] = device_serial_number[0] + 1; + + icicle_mac_addr[0] = '['; + + sprintf(&icicle_mac_addr[1], "%pM", mac_addr); + + icicle_mac_addr[18] = ']'; + icicle_mac_addr[19] = '\0'; + + for (idx = 0; idx < 20; idx++) { + if (icicle_mac_addr[idx] == ':') + icicle_mac_addr[idx] = ' '; + } + env_set("icicle_mac_addr1", icicle_mac_addr);

return 0; } diff --git a/configs/microchip_mpfs_icicle_defconfig b/configs/microchip_mpfs_icicle_defconfig index 90ae76cc12..b3c7e6db8f 100644 --- a/configs/microchip_mpfs_icicle_defconfig +++ b/configs/microchip_mpfs_icicle_defconfig @@ -6,7 +6,6 @@ CONFIG_DEFAULT_DEVICE_TREE="microchip-mpfs-icicle-kit" CONFIG_TARGET_MICROCHIP_ICICLE=y CONFIG_ARCH_RV64I=y CONFIG_RISCV_SMODE=y -CONFIG_SBI_V01=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x80200000 CONFIG_FIT=y

Add I2C driver code for the Microchip PolarFire SoC. This driver supports I2C data transfer and probe for I2C slave addresses.

Signed-off-by: Padmarao Begari padmarao.begari@microchip.com --- drivers/i2c/Kconfig | 6 + drivers/i2c/Makefile | 1 + drivers/i2c/i2c-microchip.c | 482 ++++++++++++++++++++++++++++++++++++ 3 files changed, 489 insertions(+) create mode 100644 drivers/i2c/i2c-microchip.c

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 7c447a8aa0..5482a4a470 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -250,6 +250,12 @@ config SYS_I2C_MESON internal buffer holding up to 8 bytes for transfers and supports both 7-bit and 10-bit addresses.

+config SYS_I2C_MICROCHIP + bool "Microchip I2C driver" + help + Add support for the Microchip I2C driver. This is operating on + standard mode up to 100 kbits/s and fast mode up to 400 kbits/s. + config SYS_I2C_MXC bool "NXP MXC I2C driver" help diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index fca6b157f8..9d41f379bb 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_SYS_I2C_IPROC) += iproc_i2c.o obj-$(CONFIG_SYS_I2C_KONA) += kona_i2c.o obj-$(CONFIG_SYS_I2C_LPC32XX) += lpc32xx_i2c.o obj-$(CONFIG_SYS_I2C_MESON) += meson_i2c.o +obj-$(CONFIG_SYS_I2C_MICROCHIP) += i2c-microchip.o obj-$(CONFIG_SYS_I2C_MV) += mv_i2c.o obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o diff --git a/drivers/i2c/i2c-microchip.c b/drivers/i2c/i2c-microchip.c new file mode 100644 index 0000000000..12f65d0af7 --- /dev/null +++ b/drivers/i2c/i2c-microchip.c @@ -0,0 +1,482 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Microchip I2C controller driver + * + * Copyright (C) 2021 Microchip Technology Inc. + * Padmarao Begari padmarao.begari@microchip.com + */ +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <i2c.h> +#include <asm/io.h> +#include <dm/device_compat.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/err.h> + +#define MICROCHIP_I2C_TIMEOUT (1000 * 60) + +#define MPFS_I2C_CTRL (0x00) +#define CTRL_CR0 (0x00) +#define CTRL_CR1 (0x01) +#define CTRL_AA BIT(2) +#define CTRL_SI BIT(3) +#define CTRL_STO BIT(4) +#define CTRL_STA BIT(5) +#define CTRL_ENS1 BIT(6) +#define CTRL_CR2 (0x07) +#define MPFS_I2C_STATUS (0x04) +#define STATUS_BUS_ERROR (0x00) +#define STATUS_M_START_SENT (0x08) +#define STATUS_M_REPEATED_START_SENT (0x10) +#define STATUS_M_SLAW_ACK (0x18) +#define STATUS_M_SLAW_NACK (0x20) +#define STATUS_M_TX_DATA_ACK (0x28) +#define STATUS_M_TX_DATA_NACK (0x30) +#define STATUS_M_ARB_LOST (0x38) +#define STATUS_M_SLAR_ACK (0x40) +#define STATUS_M_SLAR_NACK (0x48) +#define STATUS_M_RX_DATA_ACKED (0x50) +#define STATUS_M_RX_DATA_NACKED (0x58) +#define STATUS_S_SLAW_ACKED (0x60) +#define STATUS_S_ARB_LOST_SLAW_ACKED (0x68) +#define STATUS_S_GENERAL_CALL_ACKED (0x70) +#define STATUS_S_ARB_LOST_GENERAL_CALL_ACKED (0x78) +#define STATUS_S_RX_DATA_ACKED (0x80) +#define STATUS_S_RX_DATA_NACKED (0x88) +#define STATUS_S_GENERAL_CALL_RX_DATA_ACKED (0x90) +#define STATUS_S_GENERAL_CALL_RX_DATA_NACKED (0x98) +#define STATUS_S_RX_STOP (0xA0) +#define STATUS_S_SLAR_ACKED (0xA8) +#define STATUS_S_ARB_LOST_SLAR_ACKED (0xB0) +#define STATUS_S_TX_DATA_ACK (0xb8) +#define STATUS_S_TX_DATA_NACK (0xC0) +#define STATUS_LAST_DATA_ACK (0xC8) +#define STATUS_M_SMB_MASTER_RESET (0xD0) +#define STATUS_S_SCL_LOW_TIMEOUT (0xD8) +#define STATUS_NO_STATE_INFO (0xF8) +#define MPFS_I2C_DATA (0x08) +#define MPFS_I2C_SLAVE0_ADDR (0x0c) +#define MPFS_I2C_SMBUS (0x10) +#define MPFS_I2C_FREQ (0x14) +#define MPFS_I2C_GLITCHREG (0x18) +#define MPFS_I2C_SLAVE1_ADDR (0x1c) + +#define PCLK_DIV_256 ((0 << CTRL_CR0) | (0 << CTRL_CR1) | (0 << CTRL_CR2)) +#define PCLK_DIV_224 ((1 << CTRL_CR0) | (0 << CTRL_CR1) | (0 << CTRL_CR2)) +#define PCLK_DIV_192 ((0 << CTRL_CR0) | (1 << CTRL_CR1) | (0 << CTRL_CR2)) +#define PCLK_DIV_160 ((1 << CTRL_CR0) | (1 << CTRL_CR1) | (0 << CTRL_CR2)) +#define PCLK_DIV_960 ((0 << CTRL_CR0) | (0 << CTRL_CR1) | (1 << CTRL_CR2)) +#define PCLK_DIV_120 ((1 << CTRL_CR0) | (0 << CTRL_CR1) | (1 << CTRL_CR2)) +#define PCLK_DIV_60 ((0 << CTRL_CR0) | (1 << CTRL_CR1) | (1 << CTRL_CR2)) +#define BCLK_DIV_8 ((1 << CTRL_CR0) | (1 << CTRL_CR1) | (1 << CTRL_CR2)) +#define CLK_MASK ((1 << CTRL_CR0) | (1 << CTRL_CR1) | (1 << CTRL_CR2)) + +/* + * mpfs_i2c_bus - I2C bus context + * @base: pointer to register struct + * @msg_len: number of bytes transferred in msg + * @msg_err: error code for completed message + * @i2c_clk: clock reference for i2c input clock + * @clk_rate: current i2c bus clock rate + * @buf: ptr to msg buffer for easier use. + * @addr: i2c address. + * @isr_status: cached copy of local ISR status. + */ +struct mpfs_i2c_bus { + void __iomem *base; + size_t msg_len; + int msg_err; + struct clk i2c_clk; + u32 clk_rate; + u8 *buf; + u8 addr; + u32 isr_status; +}; + +static inline u8 i2c_8bit_addr_from_msg(const struct i2c_msg *msg) +{ + return (msg->addr << 1) | (msg->flags & I2C_M_RD ? 1 : 0); +} + +static void mpfs_i2c_int_clear(struct mpfs_i2c_bus *bus) +{ + u8 ctrl = readl(bus->base + MPFS_I2C_CTRL); + + ctrl &= ~CTRL_SI; + writel(ctrl, bus->base + MPFS_I2C_CTRL); +} + +static void mpfs_i2c_core_disable(struct mpfs_i2c_bus *bus) +{ + u8 ctrl = readl(bus->base + MPFS_I2C_CTRL); + + ctrl &= ~CTRL_ENS1; + writel(ctrl, bus->base + MPFS_I2C_CTRL); +} + +static void mpfs_i2c_core_enable(struct mpfs_i2c_bus *bus) +{ + u8 ctrl = readl(bus->base + MPFS_I2C_CTRL); + + ctrl |= CTRL_ENS1; + writel(ctrl, bus->base + MPFS_I2C_CTRL); +} + +static void mpfs_i2c_reset(struct mpfs_i2c_bus *bus) +{ + mpfs_i2c_core_disable(bus); + mpfs_i2c_core_enable(bus); +} + +static inline void mpfs_i2c_stop(struct mpfs_i2c_bus *bus) +{ + u8 ctrl = readl(bus->base + MPFS_I2C_CTRL); + + ctrl |= CTRL_STO; + writel(ctrl, bus->base + MPFS_I2C_CTRL); +} + +static inline int mpfs_generate_divisor(u32 rate, u8 *code) +{ + int ret = 0; + + if (rate >= 960) + *code = PCLK_DIV_960; + else if (rate >= 256) + *code = PCLK_DIV_256; + else if (rate >= 224) + *code = PCLK_DIV_224; + else if (rate >= 192) + *code = PCLK_DIV_192; + else if (rate >= 160) + *code = PCLK_DIV_160; + else if (rate >= 120) + *code = PCLK_DIV_120; + else if (rate >= 60) + *code = PCLK_DIV_60; + else if (rate >= 8) + *code = BCLK_DIV_8; + else + ret = -EINVAL; + + return ret; +} + +static int mpfs_i2c_init(struct mpfs_i2c_bus *bus, struct udevice *dev) +{ + u32 clk_rate, divisor; + u8 clkval, ctrl; + int ret; + + ret = clk_get_by_index(dev, 0, &bus->i2c_clk); + if (ret) + return -EINVAL; + + ret = clk_enable(&bus->i2c_clk); + if (ret) + return ret; + + clk_rate = clk_get_rate(&bus->i2c_clk); + if (!clk_rate) + return -EINVAL; + + clk_free(&bus->i2c_clk); + + divisor = clk_rate / bus->clk_rate; + + ctrl = readl(bus->base + MPFS_I2C_CTRL); + + ctrl &= ~CLK_MASK; + + ret = mpfs_generate_divisor(divisor, &clkval); + if (ret) + return -EINVAL; + + ctrl |= clkval; + + writel(ctrl, bus->base + MPFS_I2C_CTRL); + + ctrl = readl(bus->base + MPFS_I2C_CTRL); + + /* Reset I2C core */ + mpfs_i2c_reset(bus); + + return 0; +} + +static void mpfs_i2c_transfer(struct mpfs_i2c_bus *bus, u32 data) +{ + if (bus->msg_len > 0) + writel(data, bus->base + MPFS_I2C_DATA); +} + +static void mpfs_i2c_empty_rx(struct mpfs_i2c_bus *bus) +{ + u8 ctrl; + u8 data_read; + + if (bus->msg_len > 0) { + data_read = readl(bus->base + MPFS_I2C_DATA); + *bus->buf++ = data_read; + bus->msg_len--; + } + + if (bus->msg_len == 0) { + ctrl = readl(bus->base + MPFS_I2C_CTRL); + ctrl &= ~CTRL_AA; + writel(ctrl, bus->base + MPFS_I2C_CTRL); + } +} + +static int mpfs_i2c_fill_tx(struct mpfs_i2c_bus *bus) +{ + mpfs_i2c_transfer(bus, *bus->buf++); + bus->msg_len--; + + return 0; +} + +static int mpfs_i2c_service_handler(struct mpfs_i2c_bus *bus) +{ + bool finish = false; + u32 status; + u8 ctrl; + + status = bus->isr_status; + + switch (status) { + case STATUS_M_START_SENT: + case STATUS_M_REPEATED_START_SENT: + ctrl = readl(bus->base + MPFS_I2C_CTRL); + ctrl &= ~CTRL_STA; + writel(bus->addr, bus->base + MPFS_I2C_DATA); + writel(ctrl, bus->base + MPFS_I2C_CTRL); + break; + case STATUS_M_SLAW_ACK: + case STATUS_M_TX_DATA_ACK: + if (bus->msg_len > 0) { + mpfs_i2c_fill_tx(bus); + } else { + /* On the last byte to be transmitted, send STOP */ + mpfs_i2c_stop(bus); + finish = true; + } + break; + case STATUS_M_SLAR_ACK: + ctrl = readl(bus->base + MPFS_I2C_CTRL); + ctrl |= CTRL_AA; + writel(ctrl, bus->base + MPFS_I2C_CTRL); + if (bus->msg_len == 0) { + /* On the last byte to be transmitted, send STOP */ + mpfs_i2c_stop(bus); + finish = true; + } + break; + case STATUS_M_RX_DATA_ACKED: + mpfs_i2c_empty_rx(bus); + if (bus->msg_len == 0) { + /* On the last byte to be transmitted, send STOP */ + mpfs_i2c_stop(bus); + finish = true; + } + break; + case STATUS_M_TX_DATA_NACK: + case STATUS_M_RX_DATA_NACKED: + case STATUS_M_SLAR_NACK: + case STATUS_M_SLAW_NACK: + bus->msg_err = -ENXIO; + mpfs_i2c_stop(bus); + finish = true; + break; + + case STATUS_M_ARB_LOST: + /* Handle Lost Arbitration */ + bus->msg_err = -EAGAIN; + finish = true; + break; + default: + break; + } + + if (finish) { + ctrl = readl(bus->base + MPFS_I2C_CTRL); + ctrl &= ~CTRL_AA; + writel(ctrl, bus->base + MPFS_I2C_CTRL); + return 0; + } + + return 1; +} + +static int mpfs_i2c_service(struct mpfs_i2c_bus *bus) +{ + int ret = 0; + int si_bit; + + si_bit = readl(bus->base + MPFS_I2C_CTRL); + if (si_bit & CTRL_SI) { + bus->isr_status = readl(bus->base + MPFS_I2C_STATUS); + ret = mpfs_i2c_service_handler(bus); + } + /* Clear the si flag */ + mpfs_i2c_int_clear(bus); + si_bit = readl(bus->base + MPFS_I2C_CTRL); + + return ret; +} + +static int mpfs_i2c_check_service_change(struct mpfs_i2c_bus *bus) +{ + u8 ctrl; + u32 count = 0; + + while (1) { + ctrl = readl(bus->base + MPFS_I2C_CTRL); + if (ctrl & CTRL_SI) + break; + udelay(1); + count += 1; + if (count == MICROCHIP_I2C_TIMEOUT) + return -ETIMEDOUT; + } + return 0; +} + +static int mpfs_i2c_poll_device(struct mpfs_i2c_bus *bus) +{ + int ret; + + while (1) { + ret = mpfs_i2c_check_service_change(bus); + if (ret) + return ret; + + ret = mpfs_i2c_service(bus); + if (!ret) + /* all messages have been transferred */ + return ret; + } +} + +static int mpfs_i2c_xfer_msg(struct mpfs_i2c_bus *bus, struct i2c_msg *msg) +{ + u8 ctrl; + int ret; + + if (!msg->len || !msg->buf) + return -EINVAL; + + bus->addr = i2c_8bit_addr_from_msg(msg); + bus->msg_len = msg->len; + bus->buf = msg->buf; + bus->msg_err = 0; + + mpfs_i2c_core_enable(bus); + + ctrl = readl(bus->base + MPFS_I2C_CTRL); + + ctrl |= CTRL_STA; + + writel(ctrl, bus->base + MPFS_I2C_CTRL); + + ret = mpfs_i2c_poll_device(bus); + if (ret) + return ret; + + return bus->msg_err; +} + +static int mpfs_i2c_xfer(struct udevice *dev, struct i2c_msg *msgs, int num_msgs) +{ + struct mpfs_i2c_bus *bus = dev_get_priv(dev); + int idx, ret; + + if (!msgs || !num_msgs) + return -EINVAL; + + for (idx = 0; idx < num_msgs; idx++) { + ret = mpfs_i2c_xfer_msg(bus, msgs++); + if (ret) + return ret; + } + + return ret; +} + +static int mpfs_i2c_probe_chip(struct udevice *dev, uint addr, uint flags) +{ + struct mpfs_i2c_bus *bus = dev_get_priv(dev); + int ret; + u8 ctrl, reg = 0; + + /* + * Send the chip address and verify that the + * address was <ACK>ed. + */ + bus->addr = addr << 1 | I2C_M_RD; + bus->buf = &reg; + bus->msg_len = 0; + bus->msg_err = 0; + + mpfs_i2c_core_enable(bus); + + ctrl = readl(bus->base + MPFS_I2C_CTRL); + + ctrl |= CTRL_STA; + + writel(ctrl, bus->base + MPFS_I2C_CTRL); + + ret = mpfs_i2c_poll_device(bus); + if (ret) + return ret; + + return bus->msg_err; +} + +static int mpfs_i2c_probe(struct udevice *dev) +{ + int ret; + u32 val; + struct mpfs_i2c_bus *bus = dev_get_priv(dev); + + bus->base = dev_read_addr_ptr(dev); + if (!bus->base) + return -EINVAL; + + val = dev_read_u32(dev, "clock-frequency", &bus->clk_rate); + if (val) { + printf("Default to 100kHz\n"); + /* default clock rate */ + bus->clk_rate = 100000; + } + + if (bus->clk_rate > 400000 || bus->clk_rate <= 0) { + printf("Invalid clock-frequency %d\n", bus->clk_rate); + return -EINVAL; + } + + ret = mpfs_i2c_init(bus, dev); + + return ret; +} + +static const struct dm_i2c_ops mpfs_i2c_ops = { + .xfer = mpfs_i2c_xfer, + .probe_chip = mpfs_i2c_probe_chip, +}; + +static const struct udevice_id mpfs_i2c_ids[] = { + {.compatible = "microchip,mpfs-i2c"}, + {} +}; + +U_BOOT_DRIVER(mpfs_i2c) = { + .name = "mpfs_i2c", + .id = UCLASS_I2C, + .of_match = mpfs_i2c_ids, + .ops = &mpfs_i2c_ops, + .probe = mpfs_i2c_probe, + .priv_auto = sizeof(struct mpfs_i2c_bus), +};

Update compatible as per Microchip PolarFire SoC ethernet device node.

Signed-off-by: Padmarao Begari padmarao.begari@microchip.com --- drivers/net/macb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 8c6461e717..1b867bd5c2 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -1502,7 +1502,7 @@ static const struct udevice_id macb_eth_ids[] = { { .compatible = "cdns,zynq-gem" }, { .compatible = "sifive,fu540-c000-gem", .data = (ulong)&sifive_config }, - { .compatible = "microchip,mpfs-mss-gem", + { .compatible = "microchip,mpfs-gem", .data = (ulong)&microchip_config }, { } };

UART1 uses for U-BOOT and Linux console instead of UART0 and UART0 is reserved for Hart Software Services(HSS).

Signed-off-by: Padmarao Begari padmarao.begari@microchip.com --- doc/board/microchip/mpfs_icicle.rst | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/doc/board/microchip/mpfs_icicle.rst b/doc/board/microchip/mpfs_icicle.rst index c71c2f3cab..d7af542c0e 100644 --- a/doc/board/microchip/mpfs_icicle.rst +++ b/doc/board/microchip/mpfs_icicle.rst @@ -18,8 +18,9 @@ The support for following drivers are already enabled:

1. NS16550 UART Driver. 2. Microchip Clock Driver. -3. Cadence MACB ethernet driver for networking support. -4. Cadence MMC Driver for eMMC/SD support. +3. Microchip I2C Driver. +4. Cadence MACB ethernet driver for networking support. +5. Cadence MMC Driver for eMMC/SD support.

Booting from eMMC using HSS --------------------------- @@ -214,7 +215,8 @@ GPT partition. Booting ~~~~~~~

-You should see the U-Boot prompt on UART0. +You should see the U-Boot prompt on UART1. +(Note: UART0 is reserved for HSS)

Sample boot log from MPFS Icicle Kit '''''''''''''''''''''''''''''''''''' @@ -451,7 +453,8 @@ copied payload and Linux image.

sudo dd if=<payload_binary> of=/dev/sdX2 bs=512

-You should see the U-Boot prompt on UART0. +You should see the U-Boot prompt on UART1. +(Note: UART0 is reserved for HSS)

GUID type ~~~~~~~~~