As board-specific reset logic, it needs to issue reset signal via CPLD when issuing 'reset' command in u-boot, this patch solves the issue of reset command not working on T1024RDB.

Signed-off-by: Shengzhou Liu Shengzhou.Liu@nxp.com --- board/freescale/t102xrdb/t102xrdb.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index 01dbf38..6de877a 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -167,6 +167,11 @@ unsigned long get_board_ddr_clk(void) return CONFIG_DDR_CLK_FREQ; }

+void board_reset(void) +{ + CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET); +} + int misc_init_r(void) { return 0;