Dear Anatolij Gustschin,

In message 4906522C.2000604@denx.de you wrote:

The following changes since commit d9d8c7c696dec370ca714c03beb6e79d4c90bd5e: Wolfgang Denk (1): Fix strmhz(): avoid printing negative fractions

are available in the git repository at:

git://git.denx.de/u-boot-video.git master

Haavard Skinnemoen (5): atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h> atmel_lcdfb: Straighten out funky vl_sync logic lcd: Implement lcd_printf() lcd: Set lcd_is_enabled before clearing the screen lcd: Let the board code show board-specific info

board/atmel/at91cap9adk/at91cap9adk.c | 29 ++++++++ board/atmel/at91sam9261ek/at91sam9261ek.c | 29 ++++++++ board/atmel/at91sam9263ek/at91sam9263ek.c | 29 ++++++++ board/atmel/at91sam9rlek/at91sam9rlek.c | 29 ++++++++ board/lwmon/lwmon.c | 29 ++++++++ board/tqc/tqm8xx/tqm8xx.c | 26 ++++++++ common/lcd.c | 100 ++++++----------------------- drivers/video/atmel_lcdfb.c | 6 +-- include/asm-arm/arch-at91/gpio.h | 1 + include/lcd.h | 2 + 10 files changed, 195 insertions(+), 85 deletions(-)

Done, thanks.

Best regards,

Wolfgang Denk