[U-Boot] [PATCH 1/2] board: tbs2910: always enable usbkbd
'usb start' is much faster now, so always enable usb keyboard
Signed-off-by: Soeren Moch smoch@web.de --- Cc: Stefano Babic sbabic@denx.de Cc: u-boot@lists.denx.de --- include/configs/tbs2910.h | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index ec0bf05..7c89e5f 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -129,9 +129,9 @@ #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE #define CONFIG_SYS_STDIO_DEREGISTER #define CONFIG_PREBOOT \ + "usb start; " \ "if hdmidet; then " \ - "usb start; " \ - "run set_con_usb_hdmi; " \ + "run set_con_hdmi; " \ "else " \ "run set_con_serial; " \ "fi;" @@ -181,12 +181,11 @@ "bootm 0x10800000 0x10d00000\0" \ "console=ttymxc0\0" \ "fan=gpio set 92\0" \ - "set_con_serial=setenv stdin serial; " \ - "setenv stdout serial; " \ + "set_con_serial=setenv stdout serial; " \ "setenv stderr serial;\0" \ - "set_con_usb_hdmi=setenv stdin serial,usbkbd; " \ - "setenv stdout serial,vga; " \ - "setenv stderr serial,vga;\0" + "set_con_hdmi=setenv stdout serial,vga; " \ + "setenv stderr serial,vga;\0" \ + "stdin=serial,usbkbd;\0"
#define CONFIG_BOOTCOMMAND \ "mmc rescan; " \
HDMI output must be enabled very early to also enable the pre-console buffer
Signed-off-by: Soeren Moch smoch@web.de --- Cc: Stefano Babic sbabic@denx.de Cc: u-boot@lists.denx.de --- include/configs/tbs2910.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 7c89e5f..640bce4 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -185,7 +185,9 @@ "setenv stderr serial;\0" \ "set_con_hdmi=setenv stdout serial,vga; " \ "setenv stderr serial,vga;\0" \ - "stdin=serial,usbkbd;\0" + "stderr=serial,vga;\0" \ + "stdin=serial,usbkbd;\0" \ + "stdout=serial,vga;\0"
#define CONFIG_BOOTCOMMAND \ "mmc rescan; " \
On 27/07/2016 16:07, Soeren Moch wrote:
HDMI output must be enabled very early to also enable the pre-console buffer
Signed-off-by: Soeren Moch smoch@web.de
Cc: Stefano Babic sbabic@denx.de Cc: u-boot@lists.denx.de
include/configs/tbs2910.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 7c89e5f..640bce4 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -185,7 +185,9 @@ "setenv stderr serial;\0" \ "set_con_hdmi=setenv stdout serial,vga; " \ "setenv stderr serial,vga;\0" \
- "stdin=serial,usbkbd;\0"
- "stderr=serial,vga;\0" \
- "stdin=serial,usbkbd;\0" \
- "stdout=serial,vga;\0"
#define CONFIG_BOOTCOMMAND \ "mmc rescan; " \
Reviewed-by: Stefano Babic sbabic@denx.de
Best regards, Stefano Babic
On 27/07/2016 16:07, Soeren Moch wrote:
'usb start' is much faster now, so always enable usb keyboard
Signed-off-by: Soeren Moch smoch@web.de
Cc: Stefano Babic sbabic@denx.de Cc: u-boot@lists.denx.de
include/configs/tbs2910.h | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index ec0bf05..7c89e5f 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -129,9 +129,9 @@ #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE #define CONFIG_SYS_STDIO_DEREGISTER #define CONFIG_PREBOOT \
- "usb start; " \ "if hdmidet; then " \
"usb start; " \"run set_con_usb_hdmi; " \
"run set_con_hdmi; " \@@ -181,12 +181,11 @@ "bootm 0x10800000 0x10d00000\0" \ "console=ttymxc0\0" \ "fan=gpio set 92\0" \
- "set_con_serial=setenv stdin serial; " \
"setenv stdout serial; " \
- "set_con_serial=setenv stdout serial; " \ "setenv stderr serial;\0" \
- "set_con_usb_hdmi=setenv stdin serial,usbkbd; " \
"setenv stdout serial,vga; " \"setenv stderr serial,vga;\0"
- "set_con_hdmi=setenv stdout serial,vga; " \
"setenv stderr serial,vga;\0" \- "stdin=serial,usbkbd;\0"
#define CONFIG_BOOTCOMMAND \ "mmc rescan; " \
Reviewed-by: Stefano Babic sbabic@denx.de
Best regards, Stefano Babic
participants (2)
-
Soeren Moch -
Stefano Babic