[U-Boot] CPCI405 doesn't build anymore
Hi Matthias,
the CPCI405 U-Boot Image doesn't build anymore. Most likely too big (again). Could you please submit a patch to fix this?
Thanks.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================
This patch fixes building U-Boot for CPCI405 boards.
Signed-off-by: Matthias Fuchs matthias.fuchs@esd-electronics.com --- Makefile | 5 +---- board/esd/cpci405/config.mk | 6 +----- include/configs/CPCI405.h | 4 ++-- 3 files changed, 4 insertions(+), 11 deletions(-)
diff --git a/Makefile b/Makefile index f8fe29c..2f07657 100644 --- a/Makefile +++ b/Makefile @@ -1261,14 +1261,11 @@ CMS700_config: unconfig CPCI2DP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
-CPCI405_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd - +CPCI405_config \ CPCI4052_config \ CPCI405DT_config \ CPCI405AB_config: unconfig @mkdir -p $(obj)board/esd/cpci405 - @echo "TEXT_BASE = 0xFFFC0000" > $(obj)board/esd/cpci405/config.tmp @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
CPCIISER4_config: unconfig diff --git a/board/esd/cpci405/config.mk b/board/esd/cpci405/config.mk index 6cfb891..1bdf5e4 100644 --- a/board/esd/cpci405/config.mk +++ b/board/esd/cpci405/config.mk @@ -21,8 +21,4 @@ # MA 02111-1307 USA #
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp - -ifndef TEXT_BASE -TEXT_BASE = 0xFFFD0000 -endif +TEXT_BASE = 0xFFFC0000 diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 1a2bc1c..eb90620 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -196,9 +196,9 @@ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFFD0000 +#define CONFIG_SYS_FLASH_BASE 0xFFFC0000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 196 kB for Monitor */ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
/*
Hi Matthias,
On Wednesday 10 December 2008, Matthias Fuchs wrote:
This patch fixes building U-Boot for CPCI405 boards.
I have a small improvement suggestion below:
Signed-off-by: Matthias Fuchs matthias.fuchs@esd-electronics.com
Makefile | 5 +---- board/esd/cpci405/config.mk | 6 +----- include/configs/CPCI405.h | 4 ++-- 3 files changed, 4 insertions(+), 11 deletions(-)
diff --git a/Makefile b/Makefile index f8fe29c..2f07657 100644 --- a/Makefile +++ b/Makefile @@ -1261,14 +1261,11 @@ CMS700_config: unconfig CPCI2DP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
-CPCI405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
+CPCI405_config \ CPCI4052_config \ CPCI405DT_config \ CPCI405AB_config: unconfig @mkdir -p $(obj)board/esd/cpci405
- @echo "TEXT_BASE = 0xFFFC0000" > $(obj)board/esd/cpci405/config.tmp @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
CPCIISER4_config: unconfig diff --git a/board/esd/cpci405/config.mk b/board/esd/cpci405/config.mk index 6cfb891..1bdf5e4 100644 --- a/board/esd/cpci405/config.mk +++ b/board/esd/cpci405/config.mk @@ -21,8 +21,4 @@ # MA 02111-1307 USA #
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE -TEXT_BASE = 0xFFFD0000 -endif +TEXT_BASE = 0xFFFC0000 diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 1a2bc1c..eb90620 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -196,9 +196,9 @@
- Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFFD0000 +#define CONFIG_SYS_FLASH_BASE 0xFFFC0000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 196 kB for Monitor */
How about this:
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of U-Boot */ #define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
You only need to change TEXT_BASE this way.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================
This patch fixes building U-Boot for CPCI405 boards.
Signed-off-by: Matthias Fuchs matthias.fuchs@esd-electronics.com --- Makefile | 5 +---- board/esd/cpci405/config.mk | 6 +----- include/configs/CPCI405.h | 6 +++--- 3 files changed, 5 insertions(+), 12 deletions(-)
diff --git a/Makefile b/Makefile index f8fe29c..2f07657 100644 --- a/Makefile +++ b/Makefile @@ -1261,14 +1261,11 @@ CMS700_config: unconfig CPCI2DP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
-CPCI405_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd - +CPCI405_config \ CPCI4052_config \ CPCI405DT_config \ CPCI405AB_config: unconfig @mkdir -p $(obj)board/esd/cpci405 - @echo "TEXT_BASE = 0xFFFC0000" > $(obj)board/esd/cpci405/config.tmp @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
CPCIISER4_config: unconfig diff --git a/board/esd/cpci405/config.mk b/board/esd/cpci405/config.mk index 6cfb891..1bdf5e4 100644 --- a/board/esd/cpci405/config.mk +++ b/board/esd/cpci405/config.mk @@ -21,8 +21,4 @@ # MA 02111-1307 USA #
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp - -ifndef TEXT_BASE -TEXT_BASE = 0xFFFD0000 -endif +TEXT_BASE = 0xFFFC0000 diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 1a2bc1c..89ba139 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -196,9 +196,9 @@ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFFD0000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */ +#define CONFIG_SYS_FLASH_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
/*
participants (2)
-
Matthias Fuchs -
Stefan Roese